• Journal of the Korean Solar Energy Society
• /
• v.37 no.4
• /
• pp.1-11
• /
• 2017

Most PV modules are fabricated by 6 cell-strings with solar cells connected in series. Moreover, bypass diodes are generally installed every 2 cell-strings to prevent PV modules from a damage induced by current mismatch or partial shading. But, in the case of special purpose PV module, like as BIPV (Building Integrated Photovoltaic), the number of cell-strings per module varies according to its size. Differ from a module employing even cell-strings, the configuration of bypass diode should be optimized in the PV module with odd strings because of oppositely facing electrodes. Hence, in this study, electrical characteristics of special purposed PV module with odd string was empirically and theoretically studied depending on arrangement of bypass diode. Here, we assumed that PV module has 3 strings and the number of bypass diodes in the system varies from 2 to 6. In case of 2 bypass diodes, shading on a center string increases short circuit current of the module, because of a parallel circuit induced by 2 bypass diodes connected to center string. Also, the loss is larger, as the shading area in the center string is enlarged. Thus, maximum power of the PV module with 2 bypass diode decreases by up to 59 (%) when shading area varies from 50 to 90 (%). On the other hand, In case of 3 and 6 bypass diodes, the maximum power reduction was within about 3 (W), even the shading area changes from 50 to 90 (%). As a result, It is an alternative to arrange the bypass diode by each string or one bypass diode in the PV module in order to completely bypass current in case of shading, when PV module with odd string are fabricated.

• MALSORI
• /
• no.44
• /
• pp.105-113
• /
• 2002

In Korean, each digit is monosyllable and some pairs are known to have high confusability, causing performance degradation of connected digit recognition systems. To improve the performance, in this paper, we employ various discriminant analyses (DA) including Linear DA (LDA), Weighted Pairwise Scatter LDA WPS-LDA), Heteroscedastic Discriminant Analysis (HDA), and Maximum Likelihood Linear Transformation (MLLT). We also examine several combinations of various DA for additional performance improvement. Experimental results show that applying any DA mentioned above improves the string accuracy, but the amount of improvement of each DA method varies according to the model complexity or number of mixtures per state. Especially, more than 20% of string error reduction is achieved by applying MLLT after WPS-LDA, compared with the baseline system, when class level of DA is defined as a tied state and 1 mixture per state is used.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.715-717
• /
• 2011

Purpose: In cases of breast reconstruction with a free transverse rectus abdominis musculocutaneous (TRAM) flap after skin-sparing mastectomy with nipple-areolar complex (NAC) removal, the flat contour of the flap's skin paddle can easily look unnatural and dissatisfying. Reconstructed NAC on the flap surface lacks the elevated contour that the normal areola possesses, resulting in an unnatural final result. Therefore, we would like to introduce a novel method to improve this problem and report the satisfactory results we obtained. Methods: Operations were conducted on 19 patients who underwent immediate breast reconstruction with a free TRAM flap and skin-sparing mastectomy from January 2009 to January 2010, with a mean follow-up of nine months. While the TRAM free flap was being inset, a purse-string suture was carried out on the dermal layer of skin flap to create a slight protrusion with Gore-$Tex^{(R)}$ sutures. Results: The elevated mound surrounding the NAC was well maintained for an average follow-up period of nine months. Nipple projection was also well maintained. There was no complaint about breast contour or nipple height reduction. In addition, there was no reported incidence of other complications. Conclusion: The purse-string suture technique presents a more natural breast silhouette around the NAC and helps to maintain nipple projection. Furthermore, it does not require any supplementary incisions or complicated skills. There has been no report of additional complications using this technique.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.5
• /
• pp.277-286
• /
• 2019

In this paper, we propose an efficient hyperplane generation technique to classify human activity from combination of events and sequence information obtained from multiple-event sensors. By generating hyperplane efficiently, our machine learning algorithm classify with less memory and run time than the LSVM (Linear Support Vector Machine) for embedded system. Because the fact that light weight and high speed algorithm is one of the most critical issue in the IoT, the study can be applied to smart home to predict human activity and provide related services. Our approach is based on reducing numbers of hyperplanes and utilizing robust string comparing algorithm. The proposed method results in reduction of memory consumption compared to the conventional ML (Machine Learning) algorithms; 252 times to LSVM and 34,033 times to LSTM (Long Short-Term Memory), although accuracy is decreased slightly. Thus our method showed outstanding performance on accuracy per hyperplane; 240 times to LSVM and 30,520 times to LSTM. The binarized image is then divided into groups, where each groups are converted to binary number, in order to reduce the number of comparison done in runtime process. The binary numbers are then converted to string. The test data is evaluated by converting to string and measuring similarity between hyperplanes using Levenshtein algorithm, which is a robust dynamic string comparing algorithm. This technique reduces runtime and enables the proposed algorithm to become 27% faster than LSVM, and 90% faster than LSTM.

• Archives of Plastic Surgery
• /
• v.37 no.2
• /
• pp.202-205
• /
• 2010

Purpose: Male nipple hypertrophy is a rare condition but is a social embarrassment for individual. The currently available techniques of nipple reduction already described in the literature for female patients are discussed, but the goal of treatment is different in male patients. In male patient, the diameter as well as vertical height should be reduced simultaneously to achieve better aesthetic results. Our new technique can reduce the diameter of the hypertrophic nipple as well as the vertical height efficiently and simply. Methods: A 19-years-old man with nipple hypertrophy on the right chest presented. The flap is designed based on the site of left nipple, symmetry, the diameter, and the projection desired. The widths of the V flaps determine projection, whereas the diameter of the C flap determines the diameter of the nipple and top of the new nipple. Unnecessary hypertrophic tissues are extirpated and the V flaps are elevated. The nipple base is reduced by purse-string suture technique. The V flaps are wrapped around, and C flap is used as a cap. Results: No complication including nipple necrosis or sensory loss were found during follow-up period. The normal symmetry of the nipple contour was restored. Conclusion: We describe a simple technique for male nipple reduction using a C-V flap with purse-string suture. In our experience, this technique has provided good aesthetic result and patient satisfaction.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.438-439
• /
• 2006

Porcelain insulators have generally been used in Korea to insulate a transmission line from the tower, and a highly polymerized compound polymer insulator which has superior stain proof characteristics, has also been used widely. Currently, a worker rides on the suspension insulator string for installation on towers and conductors but in case of polymer insulators, this will pollute and scratch the housing result in durability reduction by deterioration and corona. This study developed a high strength aluminum compound metal lauder designed to work on polymer insulators without riding, and a clamp type connecting device and safety gear for easy installation on the tower and conductor. These polymer insulator work device can be used for 154kV and 345kV polymer insulators through a strength and load test to secure safety. This paper presents field usage.

• Current Photovoltaic Research
• /
• v.10 no.4
• /
• pp.107-110
• /
• 2022

Lightweight and flexible photovoltaic (PV) modules are attractive for building-integrated photovoltaic (BIPV) applications because of their easy construction and applicability. In this study, we fabricated lightweight and flexible c-Si PV modules using ethylene tetrafluoroethylene (ETFE) front cover and shingled design string cells. The ETFE front cover instead of glass made the PV modules lighter in weight, and the shingled design string cells increased the flexibility. Finally, we fabricated a PV module with a conversion power of 240.08 W at an area of 1.25 m² and weighed only 2 kg/m². Moreover, to check the PV module's flexibility, we conducted a bending test. The difference of conversion power between the modules before and after bending shown was only 1.7 W, which showed a power reduction rate of about 0.7%.

• Journal of KIISE:Software and Applications
• /
• v.26 no.8
• /
• pp.1028-1038
• /
• 1999

본 논문에선 LR 문법의 부분 클래스를 동치인 LL 문법으로 변환하는 방법을 제시한다. 이 변환이 적용 가능한 문법을 확장된k`-transformable 문법이라 정의한다. 변환된 문법은 left-to-right 커버의 성질을 만족한다. 기존 연구에서 제시한 변환 방법은 LR 문법의 부분 클래스인 {{{{k`-transformable 클래스와 PLR 클래스를 LL 문법으로 바꾼다. 이 논문에서 제시하는 새로운 변환 방법의 적용 가능한 문법의 범위는 k`-transformable 클래스와 PLR 클래스를 포함한다. 기존의 커버링 성질을 만족하는 LL로의 문법 변환은 보편적인 LR 파서의 행동을 시뮬레이션하여 얻어진다. 이 과정에서 쉬프트, 리듀스 행동 이외에 무한의 가능성을 가진 스택 스트링의 유한 표현을 위해 리덕션 심볼에 대한 예상 행동이 추가된다. 본 논문에서는 파싱 문맥을 나타내는 LR 아이템들을 기존의 스택 스트링 표현 형태에 추가하여 스택 스트링 표현법을 정제하고, 리덕션 심볼에 대한 예상 방법을 확장하는 정형식을 제시한다. 이에 근거하여 LL 커버링 문법이 존재하는 클래스를 확장된 {{{{k`-transformable 문법으로 확장시킨다.Abstract A new transformation of a subclass of LR(k`) grammars into equivalent LL(k`) grammars is studied. The subclass of LR(k`) grammars is called extended k`-transformable. The transformed LL(k`) grammars left-to-right cover the original LR(k`) grammars. Previous transformations transform k`-transformable and PLR(k`) into LL(k`). The new transformation is more powerful in that it handles the extended k`-transformable subclass of LR(k`), which strictly includes k`-transformable and PLR(k`) classes. The previous covering transformations into LL grammars are obtained by simulating the actions of the conventional LR parser. Specially, a predict action of reduction goals is added to the action set in order to finitely represent stack string. In this paper, the stack string representation is refined by adding LR items to represent a parsing context, and the prediction of reduction goal is extended by generalizing the prediction formalism. Based on them, the previous grammar classes with LL({{{{k`) covering grammars are extended to extended k`-transformable grammars.

• Wind and Structures
• /
• v.19 no.3
• /
• pp.233-247
• /
• 2014

Vortex-induced oscillation is a type of aeroelastic phenomenon, to which extended structures such as long-span bridges are most susceptible. The vortex-induced vibration (VIV) behaviors of a concerned bridge were investigated conventionally in virtue of wind tunnel tests on string-mounted sectional models. This necessitates the building of a linkage between the response of the sectional model and that of the prototype structure. Although many released literatures have related to this issue and provided suggestions, there is a lack of consistency among them. In this study, some theoretical models describing the vortex-induced structural motion, including the linear empirical model, the nonlinear empirical model and the modified (or generalized) nonlinear empirical model, are firstly reviewed. Then, the concept of equivalent mass density is introduced based on the principle that an equal input of energy should result in identical structural amplitudes. Based on these, the theoretical linkages between the amplitude of a section model and that corresponding to the prototype bridge are discussed with different analytical models. Theoretical derivation indicates that such connections are dependent mainly on two factors, one is the presupposed shape of deformation, and the other is the theoretical VIV model employed. The theoretical analysis in this study shows that, in comparison to the nonlinear empirical models, the linear one can result in obvious larger estimations of the full bridges' responses, especially in cases of cable-stayed bridges.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.302-313
• /
• 2003

Currently, DTD(Document Type Definition) Definition of Music score has been widely studied according to applications, and the methods of automatic transformation from defined DTD to XML Schema is in progress. In addition, studies of structure of DTD definition are focused on the expression of music information by individual format. In this paper, expression method of the music information by continuous string values is suggested using the fact that measure is basically a component of score, and XML Schema is also modelled. In addition, mechanism extracting the music information from XML instance which was expressed using the proposed method is presented. As a result, XML Schema taking the continuous string values could be defined, instance obtained by the proposed method results in increasing efficiency by simplicity of XPATH and reduction of search step compared to previous method. In addition, it is possible for human to make direct expression, and it is known that the instance size decreases.