• Journal of the Korean Solar Energy Society
• /
• v.37 no.4
• /
• pp.1-11
• /
• 2017

Most PV modules are fabricated by 6 cell-strings with solar cells connected in series. Moreover, bypass diodes are generally installed every 2 cell-strings to prevent PV modules from a damage induced by current mismatch or partial shading. But, in the case of special purpose PV module, like as BIPV (Building Integrated Photovoltaic), the number of cell-strings per module varies according to its size. Differ from a module employing even cell-strings, the configuration of bypass diode should be optimized in the PV module with odd strings because of oppositely facing electrodes. Hence, in this study, electrical characteristics of special purposed PV module with odd string was empirically and theoretically studied depending on arrangement of bypass diode. Here, we assumed that PV module has 3 strings and the number of bypass diodes in the system varies from 2 to 6. In case of 2 bypass diodes, shading on a center string increases short circuit current of the module, because of a parallel circuit induced by 2 bypass diodes connected to center string. Also, the loss is larger, as the shading area in the center string is enlarged. Thus, maximum power of the PV module with 2 bypass diode decreases by up to 59 (%) when shading area varies from 50 to 90 (%). On the other hand, In case of 3 and 6 bypass diodes, the maximum power reduction was within about 3 (W), even the shading area changes from 50 to 90 (%). As a result, It is an alternative to arrange the bypass diode by each string or one bypass diode in the PV module in order to completely bypass current in case of shading, when PV module with odd string are fabricated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.5
• /
• pp.410-415
• /
• 2013

This paper proposes a bidirectional platoon control law using a coupled distance error based on the backstepping-like feedback linearization control method for an interconnected mobile agent system with a string structure. Unlike the previous results where the single agent was controlled using the only own information without other agents, the proposed control law cannot show the only distance error convergence of each agent, but also the string stability of the whole system. Also, the control performances are improved by the proposed control law in spite of low performance of bidirectional control strategy in the previous results. The proposed bidirectional platoon control algorithm is based on the backstepping-like feedback linearization control method. The position errors between each agent and the preceding and the behind agents are coupled by weighted summation. By the proposed control law, the distance error of each agent can converge to zero while the string stability is guaranteed when the coupled errors can converge to zero. To this end, the back-stepping control method is employed. The pseudo velocity input is determined considering the kinematic relationship between agents and the string stability. Then, the actual dynamic control input is determined to make the actual velocity converge to the pseudo velocity input. The stability analysis and the simulation results of the proposed method are included in order to demonstrate the practical application of the proposed algorithm.

• ETRI Journal
• /
• v.31 no.5
• /
• pp.545-553
• /
• 2009

String matching is a fundamental element of an important category of modern packet processing applications which involve scanning the content flowing through a network for thousands of strings at the line rate. To keep pace with high network speeds, specialized hardware-based solutions are needed which should be efficient enough to maintain scalability in terms of speed and the number of strings. In this paper, a novel architecture based upon a recently proposed data structure called the Bloomier filter is proposed which can successfully support scalability. The Bloomier filter is a compact data structure for encoding arbitrary functions, and it supports approximate evaluation queries. By eliminating the Bloomier filter's false positives in a space efficient way, a simple yet powerful exact string matching architecture is proposed that can handle several thousand strings at high rates and is amenable to on-chip realization. The proposed scheme is implemented in reconfigurable hardware and we compare it with existing solutions. The results show that the proposed approach achieves better performance compared to other existing architectures measured in terms of throughput per logic cells per character as a metric.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.4
• /
• pp.267-271
• /
• 2011

The insulating characteristics and temperature rise behaviors of porcelain suspension insulators were investigated. The testing insulators had used in the distribution systems normally and were sampled. Firstly, leakage current was measured and its impedance was calculated. The leakage current of good insulators is 0.2 mA and its impedance is 66 $M{\Omega}$. The worse insulators have lower impedance and the insulators having below 15 $M{\Omega}$ take place flashover at the high frequency voltage flashover test. Secondly, the temperature rise characteristics were analyzed depending on leakage current and its impedance. Surface temperature of insulators was measured for 30 minutes and until its saturation after voltage was applied. The temperature rise of insulators having 15 $M{\Omega}$ is about $14.5^{\circ}C$ above the ambient temperature. Lastly, the heating behaviors of 3 insulators in a string was analyzed. Any insulator in the string does not generate heat so far as it has at least one sound insulator. On the other hand, all the insulators in the string are bad if the string have any heating insulator.

• Archives of Plastic Surgery
• /
• v.36 no.3
• /
• pp.322-326
• /
• 2009

Purpose: Severe type of inverted nipple (cannot be pulled out above the areola plane by manipulation, grade III) usually cannot be corrected by a relatively simple purse - string suture technique. Most patients want to avoid visible scars. To treat the severe case and avoid visible stigma, we introduce this invisible dermal flap method. Methods: This new surgical procedure makes bilateral incisions on the sidewall of nipple and dissections vertically to free the ducts from the contracted tissues. After dissection, the tunnel is formed. We insert "dermal flaps" into the tunnel underneath nipple base. Then through - and - through sutures are performed vertically (6 o'clock and 12 o'clock positions) and the purse - string suture is added with 4 - 0 nylon. Results: We had treated 35 primary inverted nipples (grade III) in 27 patients and 13 recurrent nipples in 7 cases. The results were excellent in 45 nipples (93.7%). All but 3 recurred cases was fully or very satisfied with the results. Conclusion: This technique is effective for the correction of severe inverted nipples and recurrent cases. We can avoid the visible scars on the areola surface.

• Structural Engineering and Mechanics
• /
• v.35 no.1
• /
• pp.67-82
• /
• 2010

The beam string structure (BSS) has been widely applied in large span roof structures, while no analytical solutions of BSS were derived for it in the existing literature. In the first part of this paper, calculation formulas of displacement and internal forces were obtained by the Ritz-method for the most commonly used arc-shaped BSS under the vertical uniformly distributed load and the prestressing force. Then, the failure mode of BSS was proposed based on the static equilibrium. On condition the structural stability was reliable, BSS under the uniformly distributed load would fail by tensile strength failure of the string, and the beam remained in the elastic or semi-plastic range. On this basis, the limit load of BSS was given in virtue of the elastic solutions. In order to verify the linear elastic and limit state solutions proposed in this paper, three BSS modal were tested and the corresponding elastoplastic large deformation analysis was performed by the ANSYS program. The proposed failure mode of BSS was proved to be correct, and the analytical results for the linear elastic and limit state were in good agreement with the experimental and FEM results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.4
• /
• pp.451-455
• /
• 2009

This paper provides a comparison of global path planning method in single string by using pulled and pushed SOFM (Self-Organizing Feature Map) which is a method among a number of neural network. The self-organizing feature map uses a randomized small valued initial-weight-vectors, selects the neuron whose weight vector best matches input as the winning neuron, and trains the weight vectors such that neurons within the activity bubble are move toward the input vector. On the other hand, the modified SOFM method in this research uses a predetermined initial weight vectors of the one dimensional string, gives the systematic input vector whose position best matches obstacles, and trains the weight vectors such that neurons within the activity bubble are move toward or reverse the input vector, by rising a pulled- or a pushed-SOFM. According to simulation results one can conclude that the modified neural networks in single string are useful tool for the global path planning problem of a mobile robot. In comparison of the number of iteration for converging to the solution the pushed-SOFM is more useful than the pulled-SOFM in global path planning for mobile robot.

• The KIPS Transactions:PartD
• /
• v.12D no.1 s.97
• /
• pp.159-164
• /
• 2005

In a computing environment connected pan-based computers and a server by Internet, This paper describes a language learning system evaluating the quality of a handwriting string. For the purpose of the system, this paper explains how to retrieve reference data from a database, how to evaluate the quality of a handwriting string using global and local features. The Proposed system can evaluate the qualify of a handwriting string as well as a handwriting character. The qualify can be computed in the case of different language between reference and input. Therefore, we expect that the system is very useful not only for training on handwriting but also learning a language.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11B
• /
• pp.1020-1029
• /
• 2008

This paper proposes an high speed pattern matching algorithm and its implementation. The pattern matcher is used to check patterns from realtime input packet. The proposed algorithm can find exact string, range of string values, and combination of string values from input packet at high speed. Given string and rule set are modelled as a state transition graph which can find overlapped strings simultaneously, and the state transition graph is partitioned according to input implicants to reduce implementation complexity. The pattern matcher scheme uses the transformed state transition graph and input packet as an input. The pattern matcher was modelled and implemented in VHDL language. Experimental results show the proprieties of the proposed approach.

• Journal of Sericultural and Entomological Science
• /
• v.46 no.1
• /
• pp.32-37
• /
• 2004

Gayageum and Geomungo are the traditional stringed music instrument in Korea. These strings are usually made of raw silk. This study was carried out to investigate the optimum condition for silk string producing method using several kind of silk and setting temperature of silk string. If the ply of strings and twisting condition were same, tenacity and elongation of every silk strings were similar, in spite of silk strings prepared by physically different raw silk. On the other hand, in setting treatment of twisted string, it was disclosed that the proper setting temperature of silk strings were 11$0^{\circ}C$ for 20 min.