• Korean Journal of Applied Biomechanics
• /
• v.28 no.3
• /
• pp.159-164
• /
• 2018

Objective: The aims of this study were to determine the impact peak force and kinematic variables in running speed and investigate the relationship between them. Method: Thirty-nine male heel strike runners ($mean\;age=21.7{\pm}1.6y$, $mean\;mass=72.5{\pm}8.7kg$, $mean\;height=176.6{\pm}6.1cm$) were recruited in this investigation. The impact peak forces during treadmill running were assessed, and the kinematic variables were computed using three-dimensional data collected using eight infrared cameras (Oqus 300, Qualisys, Sweden). One-way analysis of variance ANOVAwas used to investigate the influence of the running speed on the parameters, and Pearson's partial correlation was used to investigate the relationship between the impact peak force and kinematic variables. Results: The running speed affected the impact peak force, stride length, stride frequency, and kinematic variables during the stride phase and the foot angle at heel contact; however, it did not affect the ankle and knee joint angles in the sagittal plane at heel contact. No significant correlation was noted between the impact peak force and kinematic variables in constantrunning speed. Conclusion: Increasing ankle and knee joint angles at heel contact may not be related to the mechanism behind reducing the impact peak force during treadmill running at constant speed.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.3
• /
• pp.191-202
• /
• 2004

The batting performance in baseball is a repetitive movement. In order to make the stabilization of posture and the efficient shift of body weight, both the range of stance and stride are important. The previous studies explained that the consistent stride which included the amount of time, stance, and direction were needed. However, the batting performance is frequently changed according to the several speed of ball. Therefore, this study was to analyze the reaction time, the range of stance, the change of stride, and the change of GRF during the batting movement in three kinds of ball speed (120km/h, 130km/h, & 140km/h). Seven elite players are participated in this study. 1. The reaction time of the stride phase was short whereas the time of the swing phase was long according to the increasing ball speed. 2. The range of the stance was wide and the mediolateral direction of the stride was decreased according to the increasing ball speed. 3. In the three kinds of ball speed, the change of body weight was transferred to the center, the rear foot, and the front foot directions. The ball speed of 130km/h showed the high frequency of the suitable batting. At this ball speed, the movement of the body weight was shifted smoothly and the value of the Ground Reaction Force was large enough.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.10
• /
• pp.934-939
• /
• 2011

This paper experimentally deals with the relationship between the ankle electromyogram(EMG) and walking motion in order to activate the ankle joint of a walking-assistance robot for rehabilitation. Based on the anatomical structure and motion pattern of an ankle joint, major muscles were selected for EMG measurements. Surface EMG signals were monitored for several human bodies at various stride distances and stride frequencies. Root-mean-squared magnitude of EMG signals were related with the walking conditions. It appeared that the magnitude of the ankle EMG signal was linearly proportional to the stride distance and stride frequency, and thus to the walking speed.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.1-8
• /
• 2007

The purpose of this study was to investigate the difference in the stride-to-stride variability between two treadmill conditions; traditional treadmill and special treadmill whose speed can be adjusted automatically by subject's walking speed. Eight male subjects (25.1 years, 172.7 cm, 66.6 kg) were participated in treadmill walking experiment. First, preferred walking speed (PWS) of each subject was determined. Second, each subject performed walking experiment with fixed PWS condition and with free PWS condition for 10 minutes. 3D motion capture system (Motion analysis Corp., USA) with 6 cameras was used to collect motion data with sampling frequency of 120Hz. Temporal and spatial variables for stride-to-stride variability were calculated. Coefficient of variance (CV) which quantifies the amount of variability and Detrended Fluctuation Analysis (DFA) which explains the structure (self-similarity) of the variability were used for analysis. Results showed that the amount of variability during free PWS condition was greater than that of fixed PWS condition. DFA results showed that there was a statistical difference between two treadmill conditions for the variables of step length, stance time, and double support time. From these results, it is possible that traditional treadmill study might give incorrect conclusion about gait variability study. Further study is necessary to clarify these matters by considering the number of subjects, experimental time, and gait variables for the study of stride-to-stride variability.

• ETRI Journal
• /
• v.44 no.6
• /
• pp.991-1003
• /
• 2022

Industrial control systems (ICSs) used to be operated in closed networks, that is, separated physically from the Internet and corporate networks, and independent protocols were used for each manufacturer. Thus, their operation was relatively safe from cyberattacks. However, with advances in recent technologies, such as big data and internet of things, companies have been trying to use data generated from the ICS environment to improve production yield and minimize process downtime. Thus, ICSs are being connected to the internet or corporate networks. These changes have increased the frequency of attacks on ICSs. Despite this increased cybersecurity risk, research on ICS security remains insufficient. In this paper, we analyze threats in detail using STRIDE threat analysis modeling and DREAD evaluation for distributed control systems, a type of ICSs, based on our work experience as cybersecurity specialists at a refinery. Furthermore, we verify the validity of threats identified using STRIDE through case studies of major ICS cybersecurity incidents: Stuxnet, BlackEnergy 3, and Triton. Finally, we present countermeasures and strategies to improve risk assessment of identified threats.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.521-528
• /
• 2011

The purpose of this study was to analyze the kinematic characteristics of the finalists in the women's 100 m event to provide important information to coaches and athletes. Three different biomechanics techniques were applied for analyzing sprinter motion: LAVEG, a panning technique, and 12 video cameras for 3 dimensional analysis of the 40 m - 70 m portion of the race. Carmelita Jeter(USA) performed the maximum speed of 10.54 m/s at the distance of 58.2 m. There was a tendency to show a better performance time with a high number of steps (p=.13) and shorter stride length (p=.14) among the 8 sprints. Furthermore, the stride frequency and the performance time were negatively correlated as a higher stride frequency had a positive impact on the performance time (p=.02). Based on 3 dimensional analysis, the 4 top ranked sprinters used the different strategies to maintain a high COM (Center of Mass) velocity during the mid portion of the race (40 m - 70 m). Carmelita Jeter(USA) showed more flexed knee and hip motion at heel contact (HC) to maintain a high COM velocity while S.A. Fraser-Pryce (JAM) showed more extended knee and hip motion at HC. On the other hands, Veronica Campbell-Brown (JAM) and Kelly-Ann Baptiste (TRI) showed a tendency to have high knee lifts during the swing phase to maintain the high COM velocity during the race. These biomechanical analyses of the women's 100 m final event in the 2011 WC, Daegu, will provide important scientific information to coaches and athletes for understanding the sprinting mechanism of today's top-class sprinters.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.2
• /
• pp.221-228
• /
• 2016

Objective: The purpose of this study was to investigate differences in gait parameters and symmetry between walking speed by using the Froude number and preferred walking speed. Method: Fifty adults (age: $21.0{\pm}1.7years$, body weight: $71.0{\pm}9.2kg$, height: $1.75{\pm}0.07m$, leg length: $0.89{\pm}0.05m$) participated in this study. Leg length-applied walking speed was calculated by using the Froude number, defined as Fr = ${\upsilon}^2$/gL, where v is the velocity, g is the gravitational acceleration, and L is the leg length. Video data were collected by using eight infrared cameras (Oqus 300, Qualysis, Sweden) and the Qualisys Track Manager software (Qualisys, Sweden), with a 200-Hz sampling frequency during two-speed walking (preferred walking speed [PS] and leg length-applied walking speed [LS]) on a treadmill (Instrumented Treadmill, Bertec, USA). The step length, stride length, support percentage, cadence, lower joint angle, range of motion (ROM), and symmetry index were then calculated by using the Matlab R2009a software. Results: Step and stride lengths were greater in LS than in PS (p < 0.05). The right single-support percentage was greater in LS than in PS (p < 0.05). The hip joint angle at heel contact and toe-off were greater in LS than in PS (p < 0.05). The hip and knee joint ROM were greater in LS than in PS (p < 0.05). Conclusion: Based on our findings, we suggest that increased walking speed had a significant effect on step length, stride length, support percentage, and lower joint ROM.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.1
• /
• pp.51-63
• /
• 2004

The purpose of this study was to investigate a three dimensional kinematic variables about the last stride and the release phase of the throwing technique for female javelin throwers. For the motion analysis, Six female javelin throwers were used as subjects. Three-dimensional coordinates were collected using the Kwon3D Motion Analysis Package Version 2.1 Program. Two S-VHS Video Cameras were used to record the locations and orientations of control object and the performances of the subjects at a frequency of 6.0 HZ. After the kinematic variables such as the time, the distance, the velocity, and the angle were analyzed about the last stride and release phase, the followings were achieved; 1. For the effectively javelin throwing, the subjects appeared to do long the approach time in the phasel of landing phase, and short the delivery time in release phase 2. In the release event, the other subjects except for subject A appeared to throwing in the lower condition than the height of themselves. This result showed to slow the projecion velocity. 3. For increase the projection vcelocity of the upper extremity joint in the release event, it appeared to do extend rather the shoulder angle than increase the extension of elbow joint. 4. The body of COG angle showed to gradually increase nearly at the vertical axis in the release event. But the front lean angle of trunk showed a small angle compare to increase of the body of COG angle. Therefore for the effectively momentum transmission of the whole body in the javelin, the front and back lean angle of trunk appeared to do fastly transfer the angle displacement in the arch posture or the crescent condition during the deliverly motion of the release phase.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.4
• /
• pp.421-427
• /
• 2010

The purpose of this study was to investigate the relationship between the quantitative analysis of biomechanical movement and the qualitative analysis of video software in order to evaluate for the walking movement. The fourteen collegiate students who agreed with the purpose and method of this study participated as subjects. The slow walking and fast walking of the subjects in the place of experiment were photographed, and calculated several mechanical factors. This empirical evidence from the experiment indicated the significant difference(p<.001) between each distant factors of the walking movement for both analyses methods, but there was no statistically significant difference between the spacial factors observed in the experiment. For more detail, no significant difference between the walking ratios that expressed the coordination between stride length and stride frequency was found. The findings also indicated the high coefficient of correlation(over r=.9) which supports higher explanation force for the biomechanical method and the Dartfish video software method. Therefore, if the data was gathered by using the proper experimental method, the video software method could be used just like the quantitative data of biomechanical method.

• Physical Therapy Rehabilitation Science
• /
• v.7 no.2
• /
• pp.83-87
• /
• 2018

Objective: The purpose of this study was to investigate the relationship between heart rate (HR), self-awareness of exercise intensity (rating of perceived exertion, RPE), and 5-meter walk test (5MWT) of persons affected by stroke during backward walking according to the preferred stride frequency (PSF), PSF+3 and PSF+6 conditions. Design: Cross-sectional study. Methods: A total of 11 persons with stroke (9 males, 2 females) participated voluntarily. All patients underwent backward walking under the PSF, PSF+3, and PSF+6 conditions in underwater and ground environments, and each condition was performed for 5 minutes. The HR, RPE, and walking speeds were measured during walking, and the measured values from underwater and ground environments were compared. Results: The HR and RPE in the ground environment were significantly increased (p<0.05), and although the 5MWT showed an increase in speed, it was not significant. The HR and RPE in the underwater environment were also significantly increased (p<0.05), however, although the 5MWT results was increased, it was not significant. The HR and RPE were significantly increased in the PSF+6 condition (p<0.05). Conclusions: The results of this study showed that backward gait training underwater can provide an appropriate exercise intensity for stroke survivors and suggests that exercises performed in an underwater environment is more effective compared to the ground environment.