• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1434-1437
• /
• 2003

Sometimes open holes are required for the function and the weight reduction of structure and machinery. However, the serious stress concentration occurs because of the geometric discontinuity caused by the holes and cutting section. In this study, it is attempted to obtain the stress concentration coefficients of the inner surface of the hole boundary by changing the position and the shape of holes on the homogeneous isotropic plate. And the effects on the plate are investigated. The results show that the stress level becomes low and the distribution area widens the position of stress concentration changes as the ratio a/b increases and change to a circle. And as the ratio a/l decreases, the stress concentration reduces. As the plate with three holes. the stress $\sigma$$\_$x/ and $\tau$$\_$xy/ of hole 1,3 becomes high, especially $\sigma$$\_$x/ dominant and high.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.833-836
• /
• 2002

Sometimes open holes are required for the function and the weight reduction of structure and machinery. However, the serious stress concentration occurs because of the geometric discontinuity caused by the holes and cutting section. In this study, it is attempted to obtain the stress concentration coefficients of the inner surface of the hole boundary by changing the position and the shape of holes on the homogeneous isotropic plate. And the effects on the plate are investigated. The results show that the stress level becomes low and the distribution area widens the position of stress concentration changes as the ratio ah increases and change to a circle. And as the ratio a/l decreases, the stress concentration reduces.

• 한국결정성장학회지
• /
• 제30권2호
• /
• pp.41-46
• /
• 2020

본 연구에서는 HVPE 성장법으로 GaN 성장 시 GaN 내에 잔류하는 stress로 인한 crack 현상을 감소시키고자 기판 종류 및 V/III 비를 조절하여 잔류 stress 특성을 알아보고자 하였다. Sapphire, GaN template 위에 각각 V/III 비 5, 10, 15의 조건으로 GaN을 성장시켜 형성된 hexagonal pit의 분포 및 깊이를 분석하였다. 이를 통해 GaN on GaN template 성장에서 V/III 비가 높을수록 hexagonal pit의 분포 영역 및 깊이가 증가하는 것을 확인하였다. Raman 측정을 통해 hexagonal pit 영역 및 깊이가 컸던 GaN on GaN template 성장에서 V/III 비가 높을수록 stress가 감소하는 것을 확인하였다. 이를 통해 hexagonal pit의 분포 및 깊이가 증가할수록 잔류 stress가 낮아짐을 확인할 수 있었으며, 향후 후막 GaN 성장 시 stress 감소 가능성에 대해 확인하였다.

• 한국지반공학회논문집
• /
• 제21권5호
• /
• pp.103-110
• /
• 2005

이 논문에서는 현장 수압파쇄시험에서 얻어진 500개 이상의 측정 자료들을 이용하여 국내 과잉 수평응력의 분포 특성에 대한 연구를 수행하였다. 현장 자료를 바탕으로 수평응력 성분의 크기와 작용방향성, 측압계수 분포에 대한 상세 분석을 하였다. 또한 심도에 따른 수평응력 성분들의 상관식과 측압계수 분포 영역의 상, 하한 경계식을 제안하였다. 심도 310m 미만 영역에서 측압계수는 심도 증가에 따라 감소되고 안정화되는 경향을 나타내지만 지역에 따라 심도 loom 이상의 영역에 3.0에 가까운 측압계수를 가지는 과잉 수평장이 형성되어 있는 것으로 조사되었다. 과잉 수평응력장 분포지역에 대한 평가 결과 국내 여러 지역의 심도 310m 이내 구간에서 암반 구조물 굴착시 응력에 의한 취성파괴의 가능성이 있는 것으로 분석되었다.

• Geomechanics and Engineering
• /
• 제37권1호
• /
• pp.73-84
• /
• 2024

Owing to the high strength and abrasive characteristics of cobble-boulders, cutters are easily worn and damaged during shield tunneling, making construction inefficient. In the present work, the stress on the ripper and scraper on the cutterhead was analyzed by the PFC3D-FLAC3D coupling model of shield tunneling to get insight into the performance of the cutterhead for cutting underground cobble and boulders. The numerical calculation results revealed that the increase in trajectory radius leads to a rising stress on the cutters, and the stress on the front cutting surface is greater than that on the back of the cutters. Moreover, the correlation between cutter wear and stress is revealed based on field measurement data. The distribution of the cutter stress is consistent with the cutter wear and breakage characteristics in actual construction, in which more extensive cutter stress is exhibited, extreme cutter wear appears, and more cutter breakage occurs. Finally, the relationship between the cutterhead opening area's layout and cutter wear distribution was investigated, indicating that the cutter wear extent is the most severe in the region where the radial opening ratio dropped sharply.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.993-999
• /
• 2004

The estimation of fatigue life at the design stage of membrane type LNG tank is very important in order to arrive at feasible and cost effective solutions considering the total lifetime of the tank. In this study, the practical procedure of fatigue life prediction by use of cumulative damage factors based on Miner-Palmgren hypothesis and probability density function has been shown with the corner region of Gaz Transport Membrane type LNG tank being used as an example. In particular the parameters of Weibull distribution that determine the stress spectrum are discussed. The main results obtained from this study are as follows: 1. The recommended value for the shape parameter of Weibull distribution for the LNG tank is 1.1 in case of using the direct calculation method proposed in this study. 2. The calculated fatigue life is influenced by the shape parameter of Weibull distribution and stress block. The safe fatigue design can be achieved by using higher value of shape parameter and the stress blocks divided into more stress blocks.

• 대한조선학회지
• /
• 제6권1호
• /
• pp.43-67
• /
• 1969

The effect of a circular hole reinforced by a ring of different material in a plate under biaxial loadings is considered. In this problem, an infinitely large flat is assumed. The reinforcing ring is of uniform rectangular cross-section of same thickness as the plate. The outer boundary of the ring is cemented to the inner boundary of the hole in the plate. The plate is subjected to hydrostatic tension and pure shear loadings. The stress distribution around the hole is obtained by means of the two dimensional theory of elasticity. To conform the validities of above solutions, a series of photo-elastic stress analysis for a composite model was carried out. Fair agreements were observed between two sets of values. The conclusions arrived at are as follows: 1) The theoretical solutions are exact ones for the case of infinitely large flat plate. 2) The solutions can be used for most case of engineering problem if the bonding between the plate and ring is perfect. 3) If the ratio of Young's moduli of the ring and the plate is increased, the stresses in the plate decrease whereas those in the ring increase. 4) The stress concentration near the hole has localized effect. 5) Under hydrostatic tension, maximum principal stress and maximum shear stress increase as the ratio of inner and outer diameters of the ring increases. 6) Under pure shear, the stresses depend upon angular orientations of the points and maximum principal stress and maximum shear stress appear at 45 degree. They increase as the ratio of inner and outer diameters of the ring increases.

• 한국안전학회지
• /
• 제15권3호
• /
• pp.57-65
• /
• 2000

The stress corrosion crack growth is simulated assuming a small axial surface crack inside a S/G tube. Internal pressure and residual stresses are considered as applied forces. Stress intensity factors along crack front, variation of crack shape and crack growth rate are obtained and discussed. It is noted that the aspect ratio of the crack is not depend on the initial crack shape but depend on the residual stress distribution.

• Composites Research
• /
• 제18권6호
• /
• pp.9-18
• /
• 2005

복합재료가 항공기 구조물 및 기계부품 등에 폭 넓게 적용됨에 따라, 복합재료 구조물에서 가장 취약한 복합재료 체결부의 설계는 매우 중요한 연구 분야로 대두되고 있다. 본 논문에서는 기계적으로 체결이 된 단일 및 다중 핀 하중을 받는 복합재료 평판에서 응력분포에 대한 해석적인 연구를 수행하였다. 또한, 기계적체결부인 핀과 구멍간에서 접촉 문제를 다루기 위하여 접촉응력해석을 이용한 유한요소 모델이 사용되었으며, 응력분포를 정량적으로 비교하기 위하여 무차원화한 응력집중계수를 이용하였다. 단일 핀 하중을 받는 경우에 대하여 적층순서, 원공의 지름에 대한 평판 폭의 비 (W/D ratio), 원공의 지름에 대한 끝단에서 원공까지의 길이의 비 (En ratio), 마찰계수, 와셔의 조임력 등에 대한 영향을 알아보았으며, 다중 핀 하중을 받는 경우에 응력집중계수를 이용하여 핀의 개수, 피치, 열의 개수, 열 간격 및 원공의 배치형상의 영향에 대하여 알아보았다. 단일 핀 하중을 받는 경우에 대한 결과로부터, DBLT (Double-Bias-Longitudinal Transverse) 복합재료 평판에서 응력이 가장 민감하게 나타나는 것을 알 수 있었고, 원공의 지름에 대한 평판 폭의 비와끝단에서 원공까지의 길이의 비에 따른 응력의 변화가 민감하게 나타나는 것을 확인할 수 있었다. 또한, 다중핀 하중을 받는 경우에 대한 응력해석의 결과로부터, 원공이 2열로 배치된 복합재료 평판에서 응력집중현상이 가장 적게 일어나는 것을 확인하였다. 이러한 해석을 통하여, 체결부에서 나타나는 응력분포로부터 복합재료 평판에서의 파손형태를 예측할 수 있다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.422-426
• /
• 2003

Model soil tank tests were conducted in sandy soil to investigate the effect of surcharge strip loads on vertical stress distribution in soil. A total number of 6 tests were performed using one loading plate and two relative density(55%, 65%). The soil was considered as an elastic material, while no friction was allowed between the wall and the soil. Measured stress values were compared to predictions defined by Frohlich, Boussinesq and Westergaard. The comparison of measured values and predictions used the ratio between the soil pressure and load value. Results of this study demonstrated that experimental values were generally larger than predictions. The Frohlich analysis provided the best prediction, while the Boussinesq analysis and Westergaard theory not presented a satisfactional result.