• 한국농공학회논문집
• /
• 제60권2호
• /
• pp.95-101
• /
• 2018

The objective of this study is to evaluate the liquefaction cyclic shear stress ratio considering the soil uncertainty. In this study, the probabilistic ground response analysis and the cyclic shear stress ratio analysis for the liquefaction potential evaluation are performed considering the soil variability. The statistical properties of input ground parameters were analyzed to investigate the parameters affecting the seismic response analysis. The Probabilistic analysis was carried out by Monte Carlo Simulation method. The ground response analysis was performed considering the soil variability and the probability distribution characteristics of the ground acceleration. The probability distribution of the peak ground acceleration by seismic characteristics was presented. The differences of liquefaction shear stress ratio results according to soil variability were compared and analyzed. The maximum acceleration of the ground by the deterministic method was analyzed to be overestimation of the ground amplification phenomenon. Also, the shear stress ratio was overestimated.

• 한국지반공학회논문집
• /
• 제39권2호
• /
• pp.19-30
• /
• 2023

연약지반 대책공법으로 적용되는 다짐모래말뚝과 같은 지중구조물은 주로 복합지반 설계법에 의해 침하 및 안정성을 분석한다. 복합지반 설계법의 기본원리는 아칭효과이며 말뚝의 보강효과는 응력분담비로 평가한다. 탄성적 특성을 갖는 그라우팅 말뚝을 지반보강공법으로 적용할 때 기존의 응력분담비 평가는 말뚝이 지표까지 설치되어 상재하중이 말뚝과 원지반에 같이 직접 재하되는 경우만을 고려해 왔다. 본 연구에서는 지반보강 말뚝의 설치를 지표까지 올리지 않고 지중 어느 위치에서 마감할 때에는 지금까지의 연구들에 의해 적용된 응력분담비 적용 방법이 달라져야 한다는 것을 보여주었다. 고강도 Jet grouting이 적용되었을 때 원지반에 대한 그라우팅 말뚝의 응력분담비(n)는 통상 30~50 범위의 값을 적용한다. 그러나 이는 지표까지 말뚝이 놓이는 경우이고 말뚝 상단의 위치가 지표로부터 멀리 깊게 위치될 경우 응력분담 효과가 급격히 저감되며 응력구(stress bulb) 경계가 되는 깊이부터는 정량적 값 1.5에 수렴했다.

• 대한치과보철학회지
• /
• 제38권3호
• /
• pp.348-357
• /
• 2000

The purpose of this study is to examine the effect of partial osseointegration situation on bone loading patterns around two different free-standing screw shaped implants (Nobel Biocare, Gothenburg, Sweden and Degussa-Huls, Hanau, German). Two dimensional axisymmetric Finite element models of two implants(10mm length and 4mm diameter) were created according to different bone quantity, quality and osseointegration ratio in maxilla and mandible bone. At the same time uni-cortical and hi-cortical fixation were analyzed. Generally, full bond case showed less stress than partial bond case in overall area and mandibular model showed less amount of stress than that of maxilla model. Maximum stress of the Branemark implant is higher than that of ANKYLOS regardless of bonding ratio at crestal and apex region. However, more stress concentration was noted in ANKYLOS implant at screw body area especially in mandible. The effect of bicortical fixation on crestal bone stress reduction is dramatical in mandible however, there was no significant effect in maxillary case. The effect of partial bond on stress distribution was more significant at screw body and apex region than in crestal region. Partial bond cases demonstrated greater stress accumulation in trabecular bone than cortical bone. It is concluded that the more accurate model of implant and bone which affects stress and strain distribution is needed to mimic in vivo behavior of implants.

• 한국지반공학회지:지반
• /
• 제12권1호
• /
• pp.87-110
• /
• 1996

터널굴착시, 막장부근의 3차원 효과를 반영하기 위해 주로 경험적인 하중분담률 개념을 도입한 2차원 유한차분법 수치해석이 수행된다. 본 논문에서는 3차원 수치해석을 수행하고 그 해석 결과와 2차원 수치해석 결과를 비교함으로써 합리적인 하중분담률의 적용 가능성 및 막장 부근의 음력집중 문제를 규명하고자 하였다. 무지보 굴착길이, 초기지중응력, 지반종류, 단면크기와 터널심도등의 하중분담률에 주된 영향을 미치는 인자들에 대한 매개변수 연구를 수행하고, 그 결과를 토대로 서울지하철의 대표적인 단면에 대해 적용가능한 하중분담률을 추천하였다.

• 대한치과보철학회지
• /
• 제44권5호
• /
• pp.561-573
• /
• 2006

Statement of the problem: In cases of low bone level in maxilla followed by extraction due to severe periodontitis or enlarged maxillary sinus, crown-root ratio of implant prosthesis will increase. The prognosis of these cases is not good as expected. Purpose : The purpose is to compare stress distribution due to crown-root ratio and effect of splinting between two implants in maxillary molar area under different loads Material and methods: Using ITI($4.1{\times}10$ mm) implant. two finite element models were made(model S: two parallel implants, model A: one of two is 20 degree inclined). Each model was designed in different crown-root ratio(0.7:1, 1:1, 1.25:1) and set cement type gold crown to make it splinted or non-splinted clinical situations. After that, 300 N force was loaded to each model in four ways.(load 1 : middle of occlusal table, load 2 : middle of buccal cusp, load 3 : middle of lingual cusp, load 4 : horizontal load to middle of buccal cusp), and stress distribution was analyzed. Results: On all occasions, stress was concentrated on neck of implant near cortical bone. In the case of inclined implant, stress was increased compared with parallel implants. Under load 1, 2, 3, stress was not increased even when crown-root ratio increases, but under load 4, when crown-root ratio increases, stress also increased. And more stress was concentrated under load 1 than load 2, 3. When crown-root ratio was same, stress under load 1, 2, 3 decreased when splinting, but under load 4, stress did not really decrease. Conclusion: Under vertical load, stress distribution related to crown-root ratio did not change. But under horizontal load, stress increased as crown-root ratio increases. Under vertical load, splinting decreased stress but under horizontal load, effect of splinting was decreased as condition of implant changes for the worse such as increase of crown-root ratio, inclined implant.

• 대한치과보철학회지
• /
• 제46권5호
• /
• pp.479-489
• /
• 2008

목적: 상악 구치부에서 자연치와 임플란트 보철시, 보철치관/고정체 비율에 따른 응력분포 양상을 비교하고자 했다. 재료 및 방법: 자연치 모델의 경우는 획득한 3차원 인체모델을 상악 좌측 제2소구치 및 제 1대구치가 포함된 상악골을 Box 형태의 3차원 유한요소모델로 변환하였고, 임플란트 모델은 3차원 인체모델에서 치아 부분을 제거하고 동일 부위에 임플란트 모델을 연결하는 과정을 거쳐서 임플란트가 삽입된 유한요소모델을 구성하였다. 치관/고정체 비율을 0.7:1, 1:1, 1.25:1이 되도록 골수준 (bone level)을 조정하였으며 각 모델의 치관 부위에 300 N의 수직 하중과 수평하중을 각각 가했다. 결과: 1. 모든 하중 조건하에서 자연치와 임플란트 모두에서 피질골과 인접하는 경부에 응력이 집중되는 양상을 보였다. 2. 치관/치근 (고정체) 비가 증가함에 따라 자연치와 임플란트 모두에서 교합면에 수직적 하중을 가한 경우에는 응력의 변화가 뚜렷하지 않았으나, 수평적 하중을 가한 경우에서는 응력이 증가하는 양상을 보였다. 3. 자연치의 경우에 치관/치근비가 증가함에 따라 splinting이 응력감소 효과를 보였고, 임플란트의 경우에는, 치관/고정체 비가 증가함에 따라 splinting이 수직 하중조건에 응력감소효과를 보였으나, 중심에서 벗어난 하중조건에는 최대응력이 오히려 증가하는 양상을 보였다. 4. 임플란트의 경우, 치관/고정체 비가 증가함에 따라 splinting이 수평하중조건 4에서 뚜렷한 응력감소 효과를 보이나, 수평 하중조건 5에서는 응력감소 효과가 감소되고, 특히 치관/고정체 비가 1.25:1인 경우에서는 오히려 응력의 증가를 보였다. 결론: 임플란트 보철물은 치관/고정체 비가 커질수록 더 큰 응력을 받게 되고, splinting의 효과도 감소하게 된다. 또한 교합하중이 임플란트의 장축을 벗어나거나 중심에서 벗어난 경우 응력이 커지는 것으로 사료된다.

• KCI Concrete Journal
• /
• 제12권1호
• /
• pp.131-138
• /
• 2000

The research purpose of this paper is to investigate the influential Parameters on the unbonded tendon stress. The parameters were the reinforcing ratio, the prestressing ratio, and the loading type. To this end. first, the influence of parameters were examined with twenty eight test results obtained from references. Then, an experimental study was carried out with nine specimens. Test variables were the reinforcing ratio and the prestressing ratio. Specimens were divided equally into three groups and each group had a different level of the reinforcing ratio. Each specimen within a group has a different level of the prestressing ratio. The investigation with previous and current tests revealed the followings; (1) the length of crack distribution zone does not have a close relation with the length of plastic hinge. (2) the prestressing ratio does not affect both the length of crack distribution and the length of plastic hinge, (3) the tendon stress variation is in reverse relation with the ratios of mild steels and tendons, (4) the loading type nay not affect significantly the length of crack distribution zone, (5) AASHTO LRFD Code equation and Moon/Lim's design equation predicted the test results well with some safety margins.

• 한국강구조학회 논문집
• /
• 제8권3호통권28호
• /
• pp.3-11
• /
• 1996

To investigate the effect of fatigue crack growth due to the surface residual stress, it is measured the residual stress distribution by x-ray diffraction at the crack tip each constant crack growth in the notch specimens, and quantitively assessed the effect of crack closure caused to the distribution of compressive stress at the crack tip from evaluating crack openning stress using the finite element analysis. It is concluded that the degree of the residual stress distribution at the crack tip is decreased with increasing the crack length. From the fact that it is similar to the crack openning stress ratio, it is found that the compressive residual stress distribution and size is related to the crack closure effect and surface residual stress field with propagating crack in the notch specimens depends on the stress intensity factor range at the crack tip.

• 한국지반공학회논문집
• /
• 제24권11호
• /
• pp.35-41
• /
• 2008

쇄석말뚝은 연약지반의 침하 억제 및 지지력 보강에 사용되는 연약지반 보강공법 가운데 하나이다. 본 연구에서는 연약지반의 침하저감효과를 평가하는데 영향을 미치는 중요한 인자인 응력분담특성을 살펴보기 위하여 쇄석말뚝으로 보강된 점토지반에 대한 실내실험을 수행하였다. 상재하중 재하 시 시간경과에 따라 쇄석말뚝의 응력비 값은 감소하는 것으로 나타났다. 점토지반의 강성도가 증가함에 따라 쇄석말뚝의 응력비는 증가하는 경향성을 보였다. 또한, 쇄석말뚝으로 보강된 연약지반의 응력분담율을 간편하게 예측하기 위하여 제안된 수정된 Baumann & Bauer의 해가 계측 결과와 잘 일치되는 결과를 보여주는 것으로 나타났다.

• International Journal of Safety
• /
• 제9권1호
• /
• pp.12-20
• /
• 2010

In this study, a series of random field test and dynamic analysis in the time domain were carried out in order to find in the reason of fatigue damage of the main and the secondary members in the 3-span continuous steel plate girder railway bridge being under in service over 60 years. From the measured and the analyzed results, the stress distribution patterns were investigated for the members with fatigue damage. In addition, global and local numerical stress analysis was performed for the members damaged severely by corrosion, to estimate variation of the distribution by corrosion. Finally, a reasonable cut-off ratio in the steel plate railway bridge will be proposed by analyzing the equivalent stress ranges according the ratio.