• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.1
• /
• pp.38-42
• /
• 2006

We report 1/f noise PSD(Power Spectrum Density) of sub-100 nm MOSFETs as a function of various parameters such as HCS (Hot Carrier Stress), bias condition, temperature, device size and types of MOSFETs. The noise spectra of sub-100 nm devices showed Lorentzian-like noise spectra. We could check roughly the position of a dominant noise source by changing $V_{DS}$. With increasing measurement temperature, the 1/f noise PSD of 50 nm PMOS device decreases, but there is no decrease in the noise of NMOS device. RTN (Random Telegraph Noise) was measured from the device that shows clearly a Lorentzian-like noise spectrum in 1/f noise spectrum.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.913-920
• /
• 1996

In this study, the counting method for multi-axial and multi-point load states was proposed. Using this counting method, the load spectrum is generated from the service load history which is measured for boom structure of excavator. Loading state for loading points of boom structure is described as a multi-dimensional state space. From this load spectrum, the stress spectrum was generated by FEM analysis using the superposition of the unit load. The cumulated damage at the severe damage point of In nm structure by the failure example is calculated by Palmgren-Miner's rule. As a result of this study, the fatigue life estimation using the multi-axial and multi-point load counting method is useful.

• Geomechanics and Engineering
• /
• v.17 no.2
• /
• pp.145-156
• /
• 2019

Since behaviors of loose, dense, silty sands vary under seismic loading, understanding the liquefaction mechanism of sandy soils continues to be an important challenges of geotechnical earthquake engineering. In this study, 36 deformation controlled cyclic simple shear tests were performed and the liquefaction potential of the sands was investigated using three different relative densities (40, 55, 70%), four different effective stresses (25, 50, 100, 150 kPa) and three different shear strain amplitudes (2, 3.5, 5%) by using energy based approach. Experiments revealed the relationship between per unit volume dissipated energy with effective stress, relative density and shear strain. The dissipate energy per unit volume was much less affected by shear strain than effective stress and relative density. In other words, the dissipated energy is strongly dependent on relative density and effective stress. These results show that the dissipated energy per unit volume is very useful and may contain the non-uniform loading conditions of the earthquake spectrum. When multiple regression analysis is performed on experiment results, a relationship is proposed that gives liquefaction energy of sandy soils depending on relative density and effective stress parameters.

• Journal of Acupuncture Research
• /
• v.21 no.5
• /
• pp.227-239
• /
• 2004

Objectives : The purpose of this study was to assess the effect of acupuncture for reducing mental stress using power spectrum analysis of the heart rate variability. Methods : 5 healthy volunteers participated in this study. After instrumentation and 5-minute rest period, mental stress was provided for 5-minute. HRV was recorded before and after the mental stress. Acupuncture was put on the HT8, and needle was removed after 15min. Than 2nd mental stress was given for 5-minute with same method. For the control, same process was repeated to same subject except for acupuncture. Results : After mental stress, LF and LF/HF ratio is significantly increased. After acupuncture treatment, LF/HF ratio is significantly decreased, and LF do not significantly changed despite of mental stress. Conclusions : The result suggest that acupuncture treatment can regulate and prevent the alteration of autonomic nerve system due to mental stress.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.6
• /
• pp.59-70
• /
• 2003

We estimated the spectrum decay parameter $\chi$ and the stress parameter ($\Delta$$\sigma$) in southeastern Korea. Especially, we propose a procedure to compute site-independent $\chi$$_{q}$ and dependent $\chi$$_{s}$ values, separately, This procedure is to use the coda normalization method for the computation of site independent Q or corresponding $\chi$$_{q}$ value as the first step followed by the next step, the computation of $\chi$$_{s}$ values for each site using the given $\chi$$_{q}$ value evaluated at the first step, For the estimation of stress parameter, we used seismic data monitored from three earthquakes occurred near Gyeongju in 1999 with the method of Jo and Baag, In addition, we simulated strong ground motion using the $\chi$ value and the stress parameter, In this case, we calculated the $\chi$ value with conventional method. The $\chi$ value of 0.016+0.000157R and the stress parameter of 92-bar was applied to the stochastic simulation, At last, we derived seismic attenuation equation using results of the stochastic prediction, and compared these results with some others reported previously.ported previously.

• Journal of Aerospace System Engineering
• /
• v.1 no.2
• /
• pp.27-36
• /
• 2007

The Damage Tolerant Design is developed to help alleviate structural failure and cracking problems in aerospace structures. Recently, the Damage Tolerant Design is required and recommended for most of aircraft design. In this paper, the damage tolerant design is applied to tilt rotor UAV. First of all, the fatigue load spectrum for the tilt rotor UAV is developed and fatigue analysis is performed for the flaperon joint which has FCL (fatigue critical location). Tilt rotor UAV has two modes: helicopter mode when UAV is taking off and landing; fixed wing mode when the tilt rotor UAV is cruising. To make fatigue load spectrum, FELIX is used for helicopter mode. TWIST is used for fixed wing mode. Fatigue analysis of flaperon joint is performed using fatigue load spectrum. E-N curve approach is used for picking crack initiation point. The LEFM(Linear Elastic Fracture Method) is considered for analyzing crack growth or propagation. Finally, including the crack initiation and propagation, the fatigue life is evaluated. Therefore the Damage Tolerant Design can be done.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.26-36
• /
• 2001

Smart sensors and actuators have recently been developed. In this study, first, small-diameter fiber Bragg grating (FBG) sensors developed by the author, whose cladding and polyimide coating diameters were 40 and $52{\mu}m$, respectively, were embedded inside a laminate without resin-rich regions around sensors and the deterioration of mechanical properties of the composite laminate. The small-diameter FBG sensor was embedded in $0^{\circ}$ ply of a CFRP laminate for the detection of transverse cracks in $90^{\circ}$ ply of the laminate. The reflection spectra from the FBG sensor were measured at various tensile stresses. The spectrum became broad and had some peaks with an increase of the transverse crack density. Furthermore, the theoretical calculation reproduced the change in the spectrum very well. These results show that the small-diameter FBG sensors have a potential to detect the occurrence of transverse cracks through the change in the form of the spectrum, and to evaluate the transverse crack density quantitatively by the spectrum width. On the other hand, shape memory alloy (SMA) films were used to suppress the initiation and growth of transverse cracks in CFRP laminates. Pre-strained SMA films were embedded between laminas in CFRP laminates and then heated to introduce the recovery stress in SMA films and compressive stresses in the weakest plies ($90^{\circ}$ ply). The effects of recovery stresses are demonstrated in the experiments and well predicted using the shear-lag analysis and the nonlinear constitutive equation of SMA films.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.30 no.1
• /
• pp.19-26
• /
• 2024

Purpose: Autism spectrum disorder impacts children's social, sensory, and language development, necessitating specialized educational support. Special classrooms play a crucial role in providing an appropriate learning environment for children with autism. However, there is a lack of systematic research on creating effective environments in these special classrooms. Methods: This study aims to gain a comprehensive and systematic understanding of the environmental composition of special classrooms for children with autism spectrum disorder, using the following systematic methodologies including literature review and case study. Results: Sensory spaces in special classrooms for children with autism help regulate sensory stimuli and promote sensory development. They provide stability, reducing stress from excessive stimuli, and enhance emotional stability. These spaces also promote communication and interaction among children and expand the diversity of learning activities, enriching experiences and stimulating interest in learning. Implications: Based on the results, we propose suggestions for improving the environment of special classrooms for children with autism spectrum disorder and provide direction for the design of such environments.

• Journal of Acupuncture Research
• /
• v.22 no.6
• /
• pp.173-180
• /
• 2005

Objectives : The purpose of this study was to assess the effect auricular acupuncture for acute mental stress using power spectrum analysis of the heart rate variability(HRV). Methods : 10 healthy volunteers participated in this study. After 5 minute rest, the first mental stress was provided for 5 minute. And then subjects rested for 15 minute. The second mental stress was provided for 5 minute. The acupoint, Shin-Mun point of the ear was stimulated for 15 minute. HRV was recorded before and after the first and second mental stress, and after auricular acupuncture stimulation. Results : After mental stress, normalized LF and LF/HF ratio is significantly increased. Before and after simple rest, normalized LF and normalized HF is significantly changed, but LF and LF/HF ratio is not significantly changed. On the other hand, before and after auricular acupuncture treatment, normalized LF, normalized HF is significantly changed, and also LF and LF/HF ratio is significantly decreased. Conclusion : The result suggest that auricular acupuncture can decrease more significantly in cardiac sympathetic activity due to mental stress than simple rest.

• Biomedical Science Letters
• /
• v.19 no.1
• /
• pp.55-60
• /
• 2013

This study was to know the effects of massage on the back region in order to reduce stress in middle age women. To investigate the effects of massage to the stress levels of middle aged women, we evaluated blood pressure (BP), heart rate variability (HRV), and ultrasonography before and after back massage. The blood pressure after massage was reduced when compared to that of pre-massage. The HRV spectrum analysis was used Frequency domain analysis such as Mean HRV, normalized low frequency (norm LF), norm high frequency (norm HF), and LF/HF ratio. Post-massage BP tended to be low, but not statistical significant. After Massage, the Mean HRV, norm LF, and LF/HF ratio were significantly reduced, while norm HF was significantly increased as compared with pre-massage. The muscle layer and fat layer were significantly diminished by massage. The study was suggested that massage may be an effective treatment for relief of stress.