• 콘크리트학회지
• /
• 제7권3호
• /
• pp.137-148
• /
• 1995

본 연구에서는 매스콘크리트의 온도응력을 해석적으로 검토하기 위하여 수화열 및 온도등력 해석용 프로그램을 개발하여 실구조물에 설치한 게이지에 의해 측정한 실측치와 비교검토를 하였다. 또한, 개발한 프로그램의 해석결과와 범용프로그램인 ADINA-T 및ADINA와 해석결과를 비교하였다. 그 결과, 본 연구에서 개발한 해석시스템의 해석결과는 범용프로그램의 해석결과와도 좋은 일치를 보였고, 내부구속이 강한구조물이나 외부구속이 강한 구조물 모두 내부의 온도 및 온도응력분포를 잘 평가하고 있음을 알았다. 따라서 본 연구에서 개발한 수화열 및 온도응력해석 프로그램은 매스콘크리트의 온도응력을 평가하는 데에 충분히 사용할 수 있음이 입증되었다.

• 한국압력기기공학회 논문집
• /
• 제14권1호
• /
• pp.24-31
• /
• 2018

The mechanical design procedure is studied for the PCHE(printed circuit heat exchanger) with electrochemical etched flow channels. The effective heat transfer plates of PCHE are assembled by diffusion bonding to make a module. PCHE is widely used for industrial applications due to its compactness, cost efficiency, and serviceability at high pressure and/or temperature conditions. The limitations and technical barriers of PCHE are investigated for application to nuclear components. Rules for design and fabrication of PCHE are specified in ASME Section VIII but not in ASME Section III of nuclear components. Therefore, the calculation procedure of key dimensions of PCHE is defined based on ASME section VIII. The effective heat transfer region of PCHE is defined by several key dimensions such as the flow channel radius, edge width, wall thickness, and ridge width. The mechanical design procedure of key dimensions was incorporated into a program for easy use in the PCHE design. The effect of assumptions used in the key dimension calculation on stress values is numerically investigated. A comparative analysis is done by comparing finite element analysis results for the semi-circular flow channels with the formula based sizing calculation assuming rectangular cross sections.

• 한국양식학회지
• /
• 제18권3호
• /
• pp.200-206
• /
• 2005

We previously pointed out that the polluted sediment elutriate manifestly affected the early events of reproductive outputs in the Pacific oysters, Crassostrea gigas. A serial dilution of priority xenobiotic sediment elutriates determined by gas chromatography/mass spectrometry (GC/MS) were exposed to gametes of the oyster with different stress burdens to detail the maternal stress transfer to its reproductive outputs. There was an apparent critical concentration over which survival and morphogenesis were significantly affected with more profound damage in morphogenesis. The critical concentration which drives mortality and abnormal morphogenesis of the larvae corresponded to a dilution between 10 and 20% of our elutriate. The adverse effects of the early lives by the xenobiotic exposure over the critical concentration were magnified by the maternal stress from the exposed benzo(a)pyrene (BaP), one of the priority polyaromatic hydrocarbons (PAHs) during the maturation condition. These results indicate that maternal transfer of the xenobiotic compounds from oysters living in the contaminated location might represent a significant adverse effect to their larval population of wild seeds.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.192-198
• /
• 1999

The present study proposes modified temperature-dependent non-Newtonian viscosity model and investigates flow characters and heat transfer enhancement of the viscoelastic non-Newtonian fluid in a 2:1 rectangular duct. The proposed modified temperature dependent viscosity model has non-zero value near the high temperature and high shear rate region while on the existing viscosity models have zero value. Two versions of thermal boundary conditions involving difference combination of heated walls and adiabatic walls are analyzed in this study. The combined effect of temperature dependent viscosity, buoyancy, and secondary flow caused by second normal stress difference are ail considered. The Reiner-Rivlin model is adopted as a viscoelastic fluid model to simulate the secondary flow caused by second normal stress difference. Calculated Nusselt numbers by the modified temperature-dependent viscosity model gives under prediction than the existing temperature-dependent viscosity model in the regions of thermally developed with same secondary normal stress difference coefficients with experimental results in the regions of thermally developed. The heat transfer enhancement of the viscoelastic fluid in a 2:1 rectangular duct is highly dependent on the secondary flow caused by the magnitude of second normal stress difference.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2008년도 공동학술대회
• /
• pp.149-154
• /
• 2008

소규모 역단층성 변위에 의한 단층주변부의 Coulomb stress의 변화를 모델 분석하였다. 본 연구에서 사용된 단층의 기하학적 형태와 응력자료는 경주시에 위치한 제4기 단층인 읍천단층의 조건을 적용하였다. Coulomb stress 모델링에서 단층면을 따라 역단층성 소규모 변위(10cm)를 가정할 경우 단층의 가장자리 주변(주향방향 양끝과 경사방향)에서 Coulomb stress의 변화가 상대적으로 높게(>2 bar) 나타났고 단층의 상하부에서 감소하는 경향을 보였다. 단층의 수직적인 단면에서는 단층의 직하부와 단층 주향의 수직방향에 "T" 자 형태의 낮은 음의 값을 보였다. 본 연구 결과는 주 단층의 역단층성 변위에 의해 나타나는 여진의 전파경로 양상을 보여준다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.441-448
• /
• 1999

The load distribution in a ground anchor is very complex because it involves three different materials(soil, grout, and steel), which sometimes act as composite sections (bonded length) or separately (unbounded length). Therefore it is very hard to understand load transfer mechanism on the anchor. In order to understand the load transfer, it is essential to consider the load distribution In the three different materials. On these purposes, full scale anchor test is planned on the geotechnical site at Sunkyunkwan University Prior to the test, modeling and analyses of the load transfer mechanism were performed on the data from the case histories.

• 한국유체기계학회 논문집
• /
• 제3권2호
• /
• pp.24-30
• /
• 2000

The structural analysis of a reactor coolant pump(RCP) of a nuclear power plant is very important for the safety assessment of the plant. Accurate boundary conditions for the heat transfer coefficient are required for reliable thermal stress analysis of the pump casing, especially in transient operations of the pump since the coolant properties are largely dependent on operational conditions. In the present study, a 3D mixed flow type coolant pump was modeled from the RCP drawings and analyzed in the steady state and number of transient flow conditions by using a commercial code STAR-CD. From the result of the computation, it is seen that the average heat transfer coefficients for the cases considered are found to be the suggested values of the manufacturer, Westinghouse Energy System. The unevenness in local heat transfer coefficients, however, is found to be considerable so that the use of average heat transfer coefficients in all boundaries might not give reliable thermal stress predictions.

• 말소리와 음성과학
• /
• 제3권3호
• /
• pp.77-88
• /
• 2011

Foreign accent in second language production depends heavily on the transfer of features from the first language. This study examines acoustic variations in segments and suprasegments by native and nonnative speakers of English, searching for patterns of the transfer and plausible indexes of foreign accent in English. The acoustic variations are analyzed with recorded read speech by 20 native English speakers and 50 Korean learners of English, in terms of vowel formants, vowel duration, and syllabic variation induced by stress. The results show that the acoustic measurements of vowel formants and vowel and syllable durations display difference between native speakers and nonnative speakers. The difference is robust in the production of lax vowels, diphthongs, and stressed syllables, namely the English-specific features. L1 transfer on L2 specification is found both at the segmental levels and at the suprasegmental levels. The transfer levels measured as groups and individuals further show a continuum of divergence from the native-like target. Overall, the eldest group, students who are in the graduate schools, shows more native-like patterns, suggesting weaker foreign accent in English, whereas the high school students tend to involve larger deviation from the native speakers' patterns. Individual results show interdependence between segmental transfer and prosodic transfer, and correlation with self-reported proficiency levels. Additionally, experience factors in English such as length of English study and length of residence in English speaking countries are further discussed as factors to explain the acoustic variation.

• 대한기계학회논문집B
• /
• 제31권12호
• /
• pp.994-1001
• /
• 2007

Numerical analysis has been carried out to investigate air-side convective heat transfer characteristics in a compact heat exchanger with circular tubes and continuous plate fins. Simulation results such as air velocity and temperature distributions are presented, and heat transfer coefficients are compared with previous experimental correlations. Three models of standard and RNG $k-{\varepsilon}$, and Reynolds stress are applied for turbulence model applicability. Predicted heat transfer coefficient from the models of standard and RNG $k-{\varepsilon}$ are very close to those of the heat transfer correlations while there are relatively large difference, more than 17 percentage in the result from the Reynolds stress model. From the calculated results a correlation for Colburn j factor in the compact heat exchanger system is suggested.

• International Journal of Korean Welding Society
• /
• 제5권1호
• /
• pp.60-65
• /
• 2005

In the field of welding the mechanical behavior of a welded structure under consideration may be predicted via heat transfer and welding residual stress analysis. Usually such numerical analyses are limited to small regular mesh models or test specimens. Nevertheless, there is very few strength assessment of the whole structure that includes the effect of welded residual stress. The present work is based on the specialized finite element codes for the calculation of nonlinear heat transfer details and residual stress including the external load on the welded RHS (Rectangular Hollow Section) T-joint connections of the whole structure. First the thermal history of the combined fillet and butt-welded T-joint equal width cold-formed RHS are calculated using nonlinear finite element analysis (FEA) considering the quarter model of the joint. Then using this thermal history the residual stress around the joints has been evaluated. To validity the FEA result, the calculated residual stresses were compared with the available experimental results. The residual stress obtained from the quarter model is mapped to the full model and then to the whole structure model using FEM codes. The results from the FEM codes were exported to the commercial package for visualization and further analysis applying loads and boundary conditions on the whole structure. The residual stress redistribution along with the external applied load is examined computationally.