• 가정∙방문간호학회지
• /
• 제24권2호
• /
• pp.133-141
• /
• 2017

Purpose: This descriptive study aims to analyze the effects of the satisfaction level in the relationship between mother-in-law and daughter-in-law, conflicts between them, acculturative stress and stress coping strategies on elderly depression in multi-cultural families. Methods: The survey was conducted on 89 mothers-in-law, aged 65 or older, in multi-cultural families with a foreign daughter-in-law. Data were collected through structured questionnaires, and then were used to conduct t-test, ANOVA, correlation and multiple regression analyses using the statistical program SPSS 21.0. Results: This study found several factors contributing to depression of mothers-in-law in multi-cultural families. Those factors include living alone without a spouse, poor health, a high level of perceived discrimination and a passive reaction in terms of stress coping strategies. Conclusion: A sense of discrimination perceived by the mothers-in-law having a foreign daughter-in-law implies that the people around them and the community should make efforts to reject distorted perspectives and remove prejudice against foreign daughters-in-law. In addition, the mothers-in-law should receive education and training to use more active and positive stress coping strategies in a stressful situation with the foreign daughter-in-law.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.280-287
• /
• 2008

In case of low pressure steam turbine used in power plant, it was operated in wet steam and high stress condition. Therefore, it is possible that the corrosion damage of low pressure was induced by this condition. According to previous study, about 30% of total blade failure correspond to corrosion fatigue or SCC(stress corrosion cracking) in low pressure turbine. Especially, LSB(last stage bucket) of low pressure turbine has a higher hardness to prevent erosion damage due to water droplet however, generally this is more dangerous for SCC damage. Therefore, to improve reliability of turbine blade. various methods for SCC evaluation has been developed. In this study, the crack found in LSB during in-service inspection was evaluated using microstructure analysis and stress analysis. From the stress analysis, the optimum size of fillet to remove the crack was proposed. And also, the reliability was evaluated for modified LSB using GOODMAN diagram.

• Journal of Welding and Joining
• /
• 제11권2호
• /
• pp.53-61
• /
• 1993

One of the most interesting and promising steel groups considered for the rocket motor case, aircraft and aerospace component is the maraging(martensitic plus aging) nickel steel, developed by International Nickel Company in 1960. This material attains a very high strength with good fracture toughness by simple heat treatments which do not involve a quenching. Full strength can be obtained by "maraging" at 480.deg. for 3 hours for the 18% Ni maraging steel. The effect of heat treatments was considered on the residual stress field of 18% Ni maraging steel weldments. In experiments, various heat treatments such as stress relieve heat treatment, aging and solution heat treatment were carried out of the GTA weldments and the residual stresses were measured by using the hole drilling method. Whereas the conventional pattern of residual stress shows the stresses to be maximum along the weld centerline with tensile stress extending into the heat affected zone, the pattern in maraging steels shows the centerline stress to be compressive. After welding, a series of aging, solution heat treatment and solution heat treatment plus aging treatment were carried out and the residual stresses were measured to reveal that these heat treatments almost completely remove the welding residual stresses.

• 대한기계학회논문집A
• /
• 제33권8호
• /
• pp.842-848
• /
• 2009

Fatigue failures are often occurred at welded joints where stress concentrations are relatively high due to the joint geometry. Although employing good detail design practices by upgrading the welded detail class enables to improve the fatigue performance, in many cases, the modification of the detail may not be practicable. As an alternative, the fatigue life extension techniques that reduce the severity of the stress concentration at the weld toe region, remove imperfections and introduce local compressive welding residual stress, have been applied. These techniques are also used as definite measures to extend the fatigue life of critical welds that have failed prematurely and have been repaired. In this study, a hammer peening procedure for using commercial pneumatic chipping hammer was developed, and the effectiveness is quantitatively evaluated. The pneumatic hammer peening makes it possible to give the weld not only a favorable shape reducing the local stress concentration, but also a beneficial compressive residual stress into material surface. In the fatigue life calculation of non-load carrying cruciform specimen treated by the pneumatic hammer peening, the life was lengthened about ten times at a stress range of 240MPa, and fatigue limit increased over 65% for the as-welded specimen.

• KSBB Journal
• /
• 제11권1호
• /
• pp.52-57
• /
• 1996

평활근 세포에 대한 shear stress의 영향을 알아보기 위해 슬라이드 글라스위에 배양된 牛 대통맥의 평활근 세포를 120시간 동안 0~26 dyn/$cm^2$의 각기 다른 일정한 shear stress의 유체에 노출하였다. 실험 장치를 순환하는 배지의 lactate dehydrogen­a ase의 농도측정 결과, 본 연구에서 적용된 shear stress 범위에서는 유체의 흐름으로 인하여 세포가 슬라이드 글라스 표면으로부터 이탈되는 현상은 없었다. 표면 $cm^2$ 당 존재하는 세포의 수를 측정한 결과, 평활근 세포는 정체배양시 가장 빨리 성장하였다. 표변에서의 shear stress가 증가할수록 i영활근 세포의 성장은 늦었으며, shear stress가 17 dyn/$cm^2$ 이상에서는 세포의 성장이 관찰되지 않았다.

• Journal of Microbiology and Biotechnology
• /
• 제11권3호
• /
• pp.443-451
• /
• 2001

In order to investigate what kind of response anaerobic bifidobacteria has on oxygen stress, five oxygen-tolerant bifidobacteria were isolated from human fecal samples. All were temporarily identified as Bifidobacterium longum through an analysis of carbohydrate utilization patterns and cellular fatty acid profiles. In the presence of oxygen, the lag phase became extended and the cell growth was suppressed. Bifidobacterial cell was able to remove dissolved oxygen in an early stage of growth and to overcome oxygen stress to a certain extent. The cell became long n size and showed a rough surface containing many nodes which were derived from abnormal or incomplete cell division. Cellular fatty acid profiled changed remarkably under a partially aerobic condition, so that the carbon chain of cellular fatty acid became short. All the dimethyl acetals originated from plasmalogen were reduced, any cyclopropane fatty acid, 9, 10-methyleneoctadecanoic acid ($C_{19:0}cyc9,10$), was increased remarkably. Oxygen stress induced a 5.5 kD protein in B. longum JI 1 of the oxygen-teolerant bifidobacteria, that was named Osp protein, and its N-terminal amino acid sequence was as follows: unknown amino acid-Thr-Gly-Val-Arg-Phe-Ser-Asp-Asp-Glu. Therefore, the oxygen-tolerant bifidobacteria seemed to defend against oxygen stress byincreasing the content of short fatty acid and cyclopropane fatty acid, and induction of an oxygen stress protein, but not the plasmalogen.

• 마이크로전자및패키징학회지
• /
• 제8권3호
• /
• pp.19-24
• /
• 2001

반도체 패키지에 사용되는 주요 재료인 리드프레임은 반도체 제품의 소형화, 박형화, 고집적 화에 대응하기 위해서 리드 및 피치의 미세화가 요구되며 제조 과정에서 발생되는 버(burr)의 제거와 잔류응력 제거에 대한 노력이 필요하다. 본 논문은 리드프레임의 제작 시 스탬핑 공정 중에 발생하는 버와 잔류응력을 제거하기 위해 전해연마를 적용하였다. 전해연마를 적용한 리드프레임은 표면의 버 등이 제거되었으며, 잔류음력은 실험에 사용된 전해액의 종류에 따라 차이가 있으나, 과염소산계의 경우에는 잔류응력을 23%제거하여 리드프레임의 신뢰성을 높일 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.201-204
• /
• 2008

In this paper, several process parameter studies of the manufacturing process of the steel cords are carried out to verify the relation between the process parameters and the residual stresses on the steel cords. At first, the finite element analysis of the drawing process is performed and the residual stress distributions with respect to the wire material and the area reduction ratio are obtained. The residual stress of the drawn wire is imported the finite element analysis of the twisting process as an initial stress. After that a parameter study of the twisting process is carried out. The process parameters are the applied tension, the over-twisting angle and the tensile strength of the drawn wire. Based on these studies, the optimum values of the process parameters which can remove or reduce the undesired residual stresses are determined. The optimum value of the process parameters are confirmed by the finite element analysis of the elastic recovery process of the steel cords. Finally, the finite element analysis of the roller straightening process is done to study the variation of the distribution of the residual stress before and after the process.

• Journal of Welding and Joining
• /
• 제5권3호
• /
• pp.53-61
• /
• 1987

Post weld heat treatment(PWHT) is usually carried out to remove the residual stress and to improve the microstructure and mechanical properties of welded joints. By the way, welding structure transformed owing to PWHT and reheating for repair loads the random cycles fatigue as offshore welding structure of constant low cycle fatigue as pressure vessel, and then, pre-existing flaws or cracks exist in a structural component and those cracks grow under cyclic loading. Therefore, the effects of PWHT and stress ratio on fatigue crack growth behaviors were studied on the three regions such as HAZ, sub-critical HAZ and deposit metal of welded joints in SM53 steel. Fatigue crack growth behavior of as-weld depended on microstructure and fatigue crack growth rate of HAZ was the lowest at eac region, but after PWHT it was somewhat higher than that of as-wel. In case of applying the stress($10kg/mm^2$) during PWHT, fatigue crack growth resistance tended to increase in the overall range of .DELTA.K.

• Journal of Plant Biotechnology
• /
• 제50권
• /
• pp.76-81
• /
• 2023

As cultured plant cells can grow in high oxidative stress conditions, they form an excellent system to study antioxidant mechanisms and the mass production of antioxidants. Oxidative stress is a major cause of damage in plants exposed to various types of environmental stress, including heavy metals, such as cadmium (Cd). Heavy metal accumulation can interfere with many cell functions and plant growth. To evaluate the contribution of oxidative stress to Cd-induced toxicity, cultured sweetpotato (Ipomoea batatas) cells were treated with increasing concentrations of Cd (0, 10, 25, and 50 μM) and cultured further. Cell growth was significantly inhibited by 25 and 50 μM of Cd, and the total protein content increased with 50 μM of Cd. Additionally, the activity of peroxidase (POD) and ascorbate peroxidase (APX), antioxidant enzymes that remove hydrogen peroxide (a reactive oxygen species), increased in the cells after treatment with 50 μM of Cd. The expression analysis of POD, APX, and peroxiredoxin (PRX) isolated from sweetpotato cultured cells in a previous study revealed the differential expression of POD in response to Cd. In this study, the expression levels of several acidic POD (swpa2, swpa3, and swpa4) and basal POD (swpb1, swpb2, and swpb3) genes were increased in Cd-treated cultured cells. These results indicate that Cd-mediated oxidative stress is closely linked to improved POD-mediated antioxidant defense capacity in sweetpotato suspension-cultured cells.