• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.189-191
• /
• 2006

This paper analyzes effect of the spinning vehicle on the GPS signal. In rapid spinning vehicles such as missiles and space rockets, carrier phase and frequency depend on the roll rate of the vehicle. It induces phase and frequency modulation caused by the roll rate. The modulated phase and frequency increase dynamic stress error of the tracking loop. Even though higher order tracking loop can remove dynamic stress error, the dynamic stress error can not be remove in this case. In order to analyze the effect of the spinning vehicle on the GPS signal, the experiments are carried out. The experiment results show the modulation of the carrier frequency and phase caused by the roll rate of the spinning vehicle.

• 대한치과기공학회지
• /
• 제45권3호
• /
• pp.61-66
• /
• 2023

Purpose: The current study examined the retention and wear resistance of stud-type attachments made of high-performance polyetheretherketone (PEEK) or polyetherketoneketone (PEKK) from the polyaryletherketones (PAEKs) family. Methods: The study sample included 10 PEEK or PEKK attachments that were mounted onto their male parts, designed on the upper aspect of the attachment, with a load of 30 N. Tensile stress was applied using an Instron machine to separate the male and female parts, and the maximum tensile stress to be applied was determined based on the retention force observed. The wear resistances of PEEK and PEKK were evaluated by measuring the inner diameter of the inserted female part 10 times. Results: The maximum tensile stresses of PEEK and PEKK were 56.26±0.58 and 69.12±0.92 N, respectively, with the maximum stress required to remove the PEKK specimens from the abutment being 12.86 N higher than that required to remove the PEEK specimens. Furthermore, PEKK exhibited higher wear resistance than PEEK. Conclusion: This study evaluated custom-made removable implant-retained attachment components for overdentures, wherein the female parts were made of PEEK or PEKK. The retention stress and wear resistance were evaluated based on the type of attachment material, and the results showed that both types of attachment inserts demonstrated clinically acceptable results in terms of retention.

• 경영과정보연구
• /
• 제37권4호
• /
• pp.257-270
• /
• 2018

힐링은 사회적으로 중요한 이슈가 되고 사회 각 전반에 영향을 주고 있다. 특히 관광은 힐링에 가장 적합한 수단으로서 관심을 받고 있지만, 실증적인 연구는 아직 부족한 편이다. 특히 야행성 소비자들의 증가와 함께 크게 성장한 심야관광분야에 있어서 이러한 힐링에 대한 연구는 거의 진행되지 않았다. 사람들이 밤시간을 활용해 스트레스를 해소한다는 측면에서 보았을 때 심야관광에서 힐링경험은 무엇보다 중요한 요소일 것이다. 따라서 본 연구에서는 심야관광에서 소비자가 지각하는 힐링경험과 심야관광태도와의 관계를 살펴보고, 낮 동안의 관광과 가장 특징적으로 다른 점이라 할 수 있는 심야의 환경적 특성인 심야스케이프가 힐링경험에 주는 영향을 보고자 하였다. 즉 심야스케이프(조명심미성, 공유분위기, 문화독특성)가 힐링경험(스트레스 해소, 행복감)에 주는 영향, 힐링경험이 심야관광태도에 주는 영향을 가정하였다. 심야관광 경험이 있는 사람들을 대상으로 데이터를 수집하고 구조방정식모형으로 분석한 결과, 심야스케이프 중 조명심미성과 공유 분위기는 스트레스 해소와 행복감 모두에 긍정적 영향을 주는 것으로 나타났고, 문화 독특성은 행복감에만 긍정적 영향을 주는 것으로 나타났다. 그리고 스트레스 해소는 행복감에 긍정적 영향을 주고, 스트레스 해소와 행복감이 심야관광태도에 긍정적 영향을 주는 것으로 나타나 심야관광을 통한 힐링경험이 심야관광에 대한 긍정적 태도를 형성하는 데 중요한 부분임을 확인하였다. 이러한 결과는 심야스케이프에 관한 연구를 확장하고 있으며, 심야 관광에 대한 이론적 실무적 시사점을 제공한다.

• 비파괴검사학회지
• /
• 제9권2호
• /
• pp.61-66
• /
• 1989

Welding residual stress was measured by ultrasonic birefringence technique. Acoustoelastic constant was taken by averaging the values in the literature. The initial birefringence from prefered orientation of grains was measured. The EMAT transducers were used to remove couplant effect. The results show that the distribution and magnitude of welding residual stress from ultrasonic measurement are in good agreements with those from semi destructive hole drilling measurement.

• Journal of Welding and Joining
• /
• 제5권2호
• /
• pp.9-16
• /
• 1987

Post weld heat treatment (PWHT) is carried out to increase the fracture toughness in heat affected zone(HAZ) and remove the residual stress. There occur some problems such as toughness decreement and stress relief cracking(SRC) in the coarse grained HAZ subjected to the effect of tempering treatment. Especially, embitterment of structure directly relates to the mode of fracture and is appeared as the difference of fracture surface, that is, grain boundary failure. Therefore, in this paper, PWHT was carried out under the stress of 0, 10, 20 and $30kg/cm^2$ to simulate residual stress in HAZ welded by heat input of 10, 30 and 40KJ/cm. Applied stress in weld HAZ during PWHT assisted precipitin of over saturated alloying element in the structure, and grain boundary failure according to welding heat input didn't almost appear at the heat input of 10 KJ/cm, but it appeared from being the applied stress of $30kg/cm^2$ at $30KJ/cm and 20kg/mm^2$ at 40KJ/cm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.84-85
• /
• 2005

Dislocations are often found at Shallow Trench Isolation (STI) process after repeated thermal cycles. The residual stress after STI process often leads defect like dislocation by post STI thermo-mechanical stress. Thermo-mechanical stress induced by STI process is difficult to remove perfectly by plastic deformation at previous thermal cycles. Embedded flash memory process is very weak in terms of post STI thermo-mechanical stress, because it requires more oxidation steps than other devices. Therefore, dislocation-free flash process should be optimized.

• Tribology and Lubricants
• /
• 제28권6호
• /
• pp.272-277
• /
• 2012

Finite element analysis was carried out using wafer-scale and particle-scale models to understand the mechanism of the fast removal rate(edge effect) at wafer edges in the chemical-mechanical polishing process. This is the first to report that a particle-scale model can explain the edge effect well in terms of stress distribution and magnitude. The results also revealed that the mechanism could not be fully understood by using the wafer-scale model, which has been used in many previous studies. The wafer-scale model neither gives the stress magnitude that is sufficient to remove material nor indicates the coincidence between the stress distribution and the removal rate along a wafer surface.

• Journal of Welding and Joining
• /
• 제3권2호
• /
• pp.16-26
• /
• 1985

Post weld heat treatment(PWHT), at more than 600.deg. C, is essential to remove residual stress and hydrogen in weld HAZ and improve fatigue characteristics. However, residual stress during PWHT is responsible for PWHT embitterment and it promotes precipitation of impurities to grain boundary. In this paper, the effect of stress simulated residual stress on fatigue failure was evaluated by fatigue test, microhardness test and fractograph. The obtained results are summarized as follows; (1) The fatigue crack growth rate(da/dN) of parent and heat treated parent was affected by microstructure due to heat treatment and it depended on stress intensity factor (.DELTA.k). (2) The fatigue strength of weld HAZ was dependent on applied stress during PWHT and da/dN after PWHT was slower than as-weld. (3) Softening amount of weld HAZ was bigger than any other due to PWHT. Hardness value of weld HAZ was affected by heat treatment under the applied stress of 10 $kgf/mm^2$, but beyond 20 $kgf/mm^2$ it was increased by the applied stress rather than heat treatment. (4) Beyond the applied stress of 20 $kgf/mm^2$ during PWHT, intergranular fracture surface was observed and its amount was increased with applied stress during PWHT. (5) Effect of applied stress during PWHT on aspect of fracture surface was larger rather than that on fatigue crack growth behavior.

• 전기학회논문지
• /
• 제59권6호
• /
• pp.1131-1135
• /
• 2010

The development of modern civilization result from the abundance of material. Yet modern people live with chronic mild stress. Excessive chronic mild stress leads to various diseases. From the risk of the disease in order to protect our bodies need to manage chronic mild stress. The purpose of this study is to inspection the effectiveness of detecting in chronic mild stress using the Multi-sensor system. The Multi-sensor system is designed that can be measure three kinds of vital signals of chronic mild stress for the detection. First Photoplethysmogram(PPG), second Electro Dermal Activity(EDA), third Skin Temperature(SKT). The ages and occupations exposed to chronic mild stress, people often use out of this system was applied to dairy products(Pen). In addition, vital signals that occur when the variety of noise was used to remove the accelerometer. Chronic mild stress by the analysis of measured vital signals from Multi-sensor system to the measurement information to a PC to a wireless transmission(Bluetooth). In this study, using Multi-sensor system writing conditions and a variety of situations in the movement to measure vital signals and measurement results verified the accuracy and reliability. Through this measure chronic mild stress in everyday life and managing to maintain will help more healthy lifestyle.

• Journal of Welding and Joining
• /
• 제11권4호
• /
• pp.103-111
• /
• 1993

Recently, several high-tensile steels(e.g. 80kg and above, $2^{1/4}Cr$-1Mo)having good quality to high temperature and pressure-resistance are widely used to construct petroleum-plant and pressure vessel of heat or nuclear-power plant. However, in the steels, reheating crack at grain boundaries of the heat affected zone(HAZ) occures during post welding heat treatment(PWHT)to remove welding residual stress. In order to study theoretically the characteristics of reheating crack created by PWHT, the computer program of three-dimensional thermal-elasto-plasto-creep analysis based on finite element method are developed, and then the mechanical behavior(history of creep strain accumulation and stress relaxation, etc)of welded join in thick plate during PWTH is clarified by the numerical results.