The NiSi is very promising candidate for the metallization in 45 nm CMOS process such as FUSI(fully silicided) gate and source/drain contact because it exhibits non-size dependent resistance, low silicon consumption and mid-gap workfunction. Ni film was first deposited by using ALD (atomic layer deposition) technique with Bis-Ni precursor and $H_2$ reactant gas at $220^{\circ}C$ with deposition rate of $1.25\;{\AA}/cycle$. The as-deposited Ni film exhibited a sheet resistance of $5\;{\Omega}/{\square}$. RTP (repaid thermal process) was then performed by varying temperature from $400^{\circ}C$ to $900^{\circ}C$ in $N_2$ ambient for the formation of NiSi. The process temperature window for the formation of low-resistance NiSi was estimated from $600^{\circ}C$ to $800^{\circ}C$ and from $700^{\circ}C$ to $800^{\circ}C$ with and without Ti capping layer. The respective sheet resistance of the films was changed to $2.5\;{\Omega}/{\square}$ and $3\;{\Omega}/{\square}$ after silicidation. This is because Ti capping layer increases reaction between Ni and Si and suppresses the oxidation and impurity incorporation into Ni film during silicidation process. The NiSi films were treated by additional thermal stress in a resistively heated furnace for test of thermal stability, showing that the film heat-treated at $800^{\circ}C$ was more stable than that at $700^{\circ}C$ due to better crystallinity.
우리는 생활주변에서 파이프의 사용을 흔히 볼 수 있다. 그 만큼 파이프의 소요량은 우리 생활에서 엄청난 양이라 할 수 있는데 그것이 기존 재료로는 콘크리트나 철강제품이 대부분을 차지하고 있다. 요즈음 대체 재료로써 복합재료가 여러 산업분야에서 각광을 받고 있다. 처음 항공분야에서 사용이 시작되어 제품의 우수성 뿐 아니라, 그 값이 점차 낮아짐에 따라 여러 분야에서 사용되고 있다. 복합재료는 내구성, 내열성, 내부식성 등 다른 어느 재료보다 좋은 성질을 가지고 있으며 특히 중량이 가볍다. 파이프 매설 공사에 있어서 운반비의 비중은 전체 공사비에 약 20-40%에 달할 만큼 크다. 따라서 복합재료의 선택은 그 비용을 감소시킬 수 있을 뿐 아니라 내구성, 내열성 등 복합재료의 여러가지 우수성을 동시에 가질 수 있다. 그리고 재료의 발달이 가속되고 있어 앞으로 유용성은 더욱 커질 것이다. 지하매설 파이프로써 반경에 비해 두께가 얇은 관인 경우 큰 변형이 발생할 것이다. 따라서 기하학적 비선형성을 고려하여야 한다. 이를 위해 변형 후의 형상에 대해 평형방정식을 세웠으며, 이를 Galerkin's method에 의해 풀었다. 하중조건은 파이프가 땅속에 묻히게 되므로 수직하중은 매설깊이에 비례하며 수평하중은 수평변위에 비례하게 가정하였다. 복합재료로 만들어진 파이프는 층(layer)수와 fiber 방향 등에 따라 강성이 틀려지며 또한 흙의 종류와 발생되는 변위에 따라 파이프-흙간의 상호작용이 달라진다. 본 연구에서는 복합재료로 만들어진 파이프가 지하에 매설된 경우 기하학적 비선형을 고려한 해석방법을 제시하며 파이프 강성에 미치는 여러 인자에 대해 고찰해 보았다. 결과가 유한요소법에 의해 검증되었다. 기술고도화를 위한 과감한 측정관련 투자 결과가 제품의 불량감소에 크게 영향을 준다는 사실이 밝혀졌다. 연구결과에 따른 주요내용과 평가분석 모형을 제시한다.을 나타냄으로써 누에소화액 protease에 의하여 용해되지 않았음을 보여 주었다. 4. 결정성독소의 amino산 조성은 subsp. israelensis에서는 aspartic산이 14.5%로 가장 많은 비율을 차지하였고 그외 4개의 subsp.에서는 glutamic산이 13.9-14.6%로 가장 많았다. 5. 결정성독소의 면역학적 특성을 보면 subsp. israelensis의 항체는 그것의 항원과만 반응하고 그외 4개의 subsp.의 항체는 각각의 항원과 그리고 서로 다른 항원과 교호하여 반응하였다.화지방산을 다량으로 함유한 칠성장어유 및 옥수수유는 동맥경화증 랫트에 있어 생체내 지질대사에 영향을 미침으로써 혈청지질치를 저하시키고 동맥벽내에 지방침착을 억제시켰으며, 이러한 효과는 n-6계 다불포화지방산을 많이 함유하고 있는 옥수수유보다 n-3rP 다불포화지방산을 다량으로 함유한 칠성장어유에 더욱 크게 나타났다isozyme but not with p. esocinus B4 isogyme, reflecting that subunit B is less conservative in its evolution.e bands (fractions) with 290 Kd to 23 Kd molecular weight, and 8 bands of these detected bands developed strongly by silver stain. In serological test, ELISA, we recognized the cross-reaction
본 연구는 상악 절치부에 active 토크가 가해졌을 경우, 교정력을 직접 받은 치아와 인접 치아의 반응을 알아보고자, 상악 치아 및 치조골의 유한요소 모델을 제작하고, stainless steel NiTi, TMA 세 종류의 각형 호선을 육면체 요소로 모델링하여 유한요소 모델을 완성하였다. 호선이 브라켓에 삽입되었을 때 브라켓에 발생하는 반력과 모멘트를 구하였고, 이것을 유한 요소 모델에 적용하여 각 치아의 변위와 응력 분포를 측정하였다 브라켓에 발생하는 반력은 근원심 방향과, 협설 방향으로의 힘은 0에 가까우며, 중절치, 측절치, 견치의 브라켓 근심측에서는 정출력이 원심측에서는 압하력이 발생하였다. 힘과 모멘트의 크기는 측절치에서 최대였고 중절치. 견치 순으로 감소하였고, 소구치 부위와 대구치 부위에서는 급격히 감소하였다. 중절치와 측절치는 치관 협측, 원심 경사 이동과 압하를 보였으며 견치는 치관 설측 원심 경사와 정출을 보였고. 제1소구치는 치관 설측 경사이동을 보였다. $019\times025SS$을 사용하여 상악 절치부에 토크를 부여하는 경우에는 측절치에 과도한 힘이 집중되므로, 임상에서 토크를 조절 할 경우에는 NiTi나 TMA 호선을 사용하는 것이 바람직하리라고 생각된다.
Liu, Ya-Qi;Park, Nam Sook;Kim, Yong Gyun;Kim, Keun Ki;Park, Hyun Chul;Son, Hong Joo;Hong, Chang Ho;Lee, Sang Mong
International Journal of Industrial Entomology and Biomaterials
/
제28권2호
/
pp.71-84
/
2014
The full-length heat shock protein 88 (HSP88) complementary DNA (cDNA) of Paecilomyces tenuipes Jocheon-1 was obtained by screening the Paecilomyces tenuipes (P. tenuipes) Jocheon-1 Uni-Zap cDNA library and performing 5' RACE polymerase chain reaction (PCR). The P. tenuipes Jocheon-1 HSP88 cDNA contained an open reading frame (ORF) of 2,139-basepair encoding 713 amino acid residues. The deduced amino acid sequence of the P. tenuipe s Jocheon-1 HSP88 cDNA showed 77% identity to Nectria haematococca HSP88 and 45-76% identity to other fungal homologous HSP88s. Phylogenetic analysis and BLAST program analysis confirmed that the deduced amino acid sequences of the P. tenuipes Jocheon-1 HSP88 gene belonged to the ascomycetes group within the fungal clade. The P. tenuipes Jocheon-1 HSP88 also contained the conserved ATPase domain at the N-terminal region. The cDNA encoding P. tenuipes Jocheon-1 HSP88 was expressed as an 88 kilodalton (kDa) polypeptide in baculovirus-infected insect Sf9 cells. Under higher temperature conditions for the growth of the entomopathogenic fungus, mRNA expression of P. tenuipes Jocheon-1 HSP88 was quantified by real time PCR (qPCR). The results showed that heat shock stress induced a higher level of mRNA expression compared to normal growth conditions.
내열 및 내유성 고무복합체 특성연구(The study on the thermal and oil resistance rubber composite), 2016.[6] 연구에서는 고온($150^{\circ}C$, $175^{\circ}C$, $200^{\circ}C$) 조건의 고온촉진노화를 통하여 불소고무 복합체의 수명을 예측하였다. 일반적인 고무제품은 온도, 습도, 오존, 빛, 유제, 기계 및 전기적 응력 등의 특성저하 인자에 따라 다른 특성을 나타낼 가능성이 있으며, 이러한 문제를 해결하기 위하여 "내열 및 내유성 고무복합체 특성연구"[6] 연구에서 얻어진 고온촉진노화에 의한 수명 예측값과 저온촉진노화간의 인장강도 변화율 및 신장률 변화율 그리고 부피 변화율, 무게 변화율, 두께 변화율 및 열전도도를 비교 검토하였다. 검토 결과, 요구 한계수명은 모두 만족하였지만 고온촉진노화 결과와 저온촉진노화 결과 간 변화율에서 약간의 격차를 보였다. 이러한 변화율 격차가 일어나는 원인은 고온촉진노화에서는 노화 시 불소고무의 주사슬 분해로 인하여 인장강도, 신장률 감소 및 부피, 무게, 두께 증가가 일어나는데 비해 저온촉진노화에서는 $80^{\circ}C$에서 불소고무의 지속적 경화반응으로 인하여 인장강도, 신장률 및 부피, 무게, 두께 변화가 적게 나타났을 것으로 판단된다.
비육우의 공장, 회장 및 결장의 특징적 괴사 출혈성 장염 증상은 폐사 증후군과 관련이 있는 것으로 인식되고 있다. 특히 젖먹이 송아지들이 폐사 증후군에 가장 영향을 받는데, 포유시 송아지에게 과식을 시키거나, 비위생적 초유 급유, 체온 하강 및 스트레스는 장독혈증 발생의 원인들이다. 2006년 7월 중 경북 영천 지역에서 축우의 폐사가 발생하였다. 식욕부진, 의기소침, 간헐적인 설사 및 경미한 호흡 곤란을 제외하고는 특별한 임상 증상은 없었으나, 조직학적 소견에 의하면, 심장, 신장, 간, 비장 및 임파선을 포함한 각종 기관에서 globular leukocytes 의 침윤뿐 아니라 핵내 봉입체가 현저하게 나타났다. 비장과 림프조직에서는 림프 괴사와 림프구 괴사로 인한 'starry sky appearance'를 나타내었다. 소장 점막 하에서는 다량의 globular leukocytes와 호산 구의 침윤과 함께 호 염기성 세포 집단이 관찰되었다. 봉입체가 있는 소장 조직의 단면은 그램 염색에 대해 조직 화학적으로 양성 반응을 나타내었다. 결론적으로, 비축우의 폐사 원인은 조직학적 및 조직화학적 분석 결과를 근거로 Clostridium perfringens D 형균에 의한 장독혈증으로 진단되었다.
The lack of a comprehensive theory describing the mechanism of adaptation scientifically has been one of the limiting factors for the development of nursing intervention of patients with chronic illness. Since Roy's theory provides the general conceptual framework depicting adaptation process with structural stimuli and control mechanism, it is appropriate to understand the process of adaptation. But in Roy's theory, the propositions about cognator and regulator as control mechanisms are not clearly defined. For this reason, most of the previous researches applying the Roy's theory have disregarded the study of cognator and regulator. For the patients with chronic illness such as rheumatoid arthritis, it was reported that adaptation states were different for the same stimuli due to the difference of the control mechanism. Moreover in nursing it is important to identify the control mechanism which can be and must be intervened by nurses. It was the Lazarus and Folkman's theory that proposed the control mechanism. They suggested that individual differences in the reaction against the perceived stress are due to the difference in appraisal and coping. Therefore, the synthesis of Roy's and Lazarus and Folkman's propositions might help to clearly understand the mechanism of adaptation. From this point, a theoretical framework has been developed and tested. The subjects were the 297 patients who had been diagnosed rheumatoid arthritis and attended the outpatient clinic. A hypothetical prediction model of adaptation was tested by the covariance structure analysis with PC-LISREL 7.13. As a result, the overall fit was good($x^2$=78.83, p=0.00 ; GFI=0.96 : AGFI=0.90 ; RMR=0.04) for the hypothetical model. In the final model added GA(5, 1), the overall fit was increased ($x^2$=57.82, p=0.003 ; GFI=0.97 ; AGFI=0.93 : RMR=0.036). Except the fact that illness symptoms affected physical adaptation directly, it was supported that focal and contextual stimuli affected physical and psychosocial adaptation through appraisal and coping. Therefore, it was asserted that the synthesis of two theory's propositions was appropriate. So this model would be useful for the theoretical framework in the nursing practice. And this study synthesizing and testing the theory might contribute to establish nursing's scientific base.
The present study was conducted to analyze the causes of stress on the part of Korean radiological technologists depending on their working environments. For this purpose, 890 questionnaires were distributed to and collected from radiological technologists who were working at 44 general hospitals in 16 cities and provinces of Korea during the period from the mid July to the end of August 2003. The collected data were compared between regions, divided into the capital, metropolitan, medium and small cities, whose results are as follows: 1. As factors affecting working conditions, drinking was found to exert more influence on radiological technologists in small- and medium-sized cities, while loyalty to immediate seniors and organizations was the one producing greater influence on them in metropolitan cities than other cities. Overall, position, job satisfaction and physical condition seemed to have a great effect on them (p<0.001).2. In terms of factors related to their roles, job satisfaction and physical condition played in general a greater role for radiological technologists (p<0.001). Immediate seniors and behavioral conducts were also found to have a lot influence on them (p<0.01).3. As for job conflicts, the kind of medical institutions seemed to exercise a great deal of impact on radiological technologists (p<0.05), while colleagues, immediate seniors, job satisfaction and physical conditions also produced a lot of influence on them as a whole (p<0.001).4. Regarding job autonomy, radiological technologists were found to have been less influenced by position in metropolitan cities and by immediate seniors in the capital city (p<0.01). As a whole, however, age and job satisfaction acted as decisive factors of influence on them (p<0.001). 5. Among factors related to job burden, gender played a bigger role for radiological technologists in metropolitan cities as the kind of medical institutions did in small- and medium-sized cities. Centrally, job satisfaction and behavioral conducts exercised a great impact on them (p<0.001).6. Job stability seemed to be more immensely linked to gender and physical conditions in metropolitan cities whereas position did more in the capital city. In general, how ever, job satisfaction produced a far-reaching (p<0.001).
AIN-BN계 머시너블 세라믹의 미세조직, 기계적 성질 및 기계 가공성에 미치는 h-BN 첨가의 영향을 조사하였다. 소결체의 상대밀도는 h-BN 첨가량의 증가와 더불어 감소하였다. 또한, 4점 굽힘 강도도 AIN 단미의 238 MPa에서 30 vo1% BN 첨가에 의해 182 MPa까지 감소하였다. 낮은 탄성계수와 AIN 매트릭스와 h-BN 입자와의 열팽창계수의 차이에 의해 발생한 잔류인장응력에 의해 AIN-BN 복합재료의 강도가 감소되었다고 생각된다. 판상형태의 h-BN 입자에 의해 균열편향과 pull-out은 증가하였으나, 파괴인성은 BN 첨가량과 더불어 감소하였다. AIN 분말표면에 존재하는 알루미나와 소결조제인 $Y_2$O$_3$와의 반응에 의해 2차상인 YAG상과 ${\gamma}$-Al$_2$O$_3$상이 생성되었다. AIN에 10~30 vo1%의 BN을 첨가한 복합재료에 대하여 수행한 절삭시험에서 절삭력과 배분력은 h-BN 첨가량에 따라 감소하였으며, 우수한 기계 가공성을 입증하였다. 또한, 모든 시편에서 짧은 시간 내에 0.5 $\mu$m (Ra) 이하의 비교적 양호한 표면 거칠기에 도달할 수 있었다.
Recently, the range of meridian muscle has expanded to muscular membranes, tendons and sinews as well as muscles, comprehending the modern manual therapy and its theories. So, in this study, the movement of body is explained through the assignment of meridian muscles into 3 Yins and 3 Yangs, and the modern manual therapy is understood with body's movement principles rather than with simple muscular movements. For this, the ground that the meridian muscles can expand to muscular membranes, tendons and sinews is researched in newest papers and studies rather than in the conventional studies that have analyzed the meridian muscles just in anatomic viewpoints. And, to find out how it can be applied to the actual clinic, its relationship with modern manual therapies such as Positional Release Therapy and Muscle Energy Techniques which are in the spotlight lately is also researched, getting the following results: Modern manual therapy is to keep the mutual balance of Yin-Yang meridian muscles after all and secure the stability of body to relieve the pains due to the stagnation of energy and blood. In the main body, they can be allotted into the opening of Great Yang/Great Yin, the closing of Bright Yang(陽明)/Small Yin, and the pivoting of Small Yang/Growing Yin (厥陰). The bending and stretching of meridian muscles as well as the movement of body can be explained according to the principle of opening, closing and pivoting. When the body is divided into 3 Yins and 3 Yangs, the viewpoint of Yin-Yang-Inside-Outside can be applied to the protagonist and antagonist muscles, giving a theoretic basis to the modern manual therapy. In the process to understand Positional Release Therapy and Muscle Energy Techniques in the viewpoint of Meridian Muscle, it turned out that the meridian muscle theory of Oriental Medicine which used to be known only in documents can well explain the movement mechanism of human body. The stress reaction through the reciprocal inhibition in Positional Release Therapy and Muscle Energy Techniques can also be understood with Yin-Yang-Inside-Outside.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.