• 한국안전학회지
• /
• 제16권4호
• /
• pp.7-13
• /
• 2001

Wire electrical discharge machining experiments in conducted to investigate characteristics of acoustic emission (AE) and electrical discharge energy due to current peak (I$_{p}$), pulse on time($\tau$/on/). The AE signals are obtained with a sensor attached to workpiece side. Machining states are identified with scanning electron microscopy and residual stress analyzer. It is demonstrated that the residual stress provide reliable informations about the machining states. Moreover, machining states can be detected successfully using both the residual stress and AE count rate.e.

• Structural Engineering and Mechanics
• /
• 제73권6호
• /
• pp.621-629
• /
• 2020

The present paper aims to study the influence of the magnetic field and initial stress on the 2-D problem of generalized thermo-viscoelastic material with voids subject to thermal loading by a laser pulse in the context of the Lord-Shulman and the classical dynamical coupled theories. The analytical expressions for the physical quantities are obtained in the physical domain by using the normal mode analysis. These expressions are calculated numerically for a specific material and explained graphically. Comparisons are made with the results predicted by the Lord-Shulman and the coupled theories in the presence and absence of the initial stress and the magnetic field.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권2호
• /
• pp.124-130
• /
• 2015

A stress-strength analysis is used to assess the reliability of a multi-pulse rocket motor system. Main stress is found to be thermal during explosion and the distribution is obtained by simulation. The strength distribution is derived from the results of actual specimen tests. The failure rate of barrier type pulse separation device is estimated.

• 마이크로전자및패키징학회지
• /
• 제26권2호
• /
• pp.51-54
• /
• 2019

실리콘 기판상에 여러 조건의 전류밀도에서 로듐 도금을 실시하였다. 직류전원의 경우 전류밀도가 증가하면 로듐 표면에 균열이 발생하였다. 잔류응력을 낮추기 위하여 펄스전류를 인가하였다. 펄스전류의 off 시간이 도금층의 잔류응력을 낮추는데 영향을 주었다. 펄스전류의 인가 주기를 5:5로 하였을 경우 균열 없는 로듐 도금층을 얻었다.

• 한국정보전자통신기술학회논문지
• /
• 제4권3호
• /
• pp.167-173
• /
• 2011

맥파를 정량적으로 측정하기 위해 다양한 맥진기가 개발되어 왔으며, 맥진기는 비침습적으로 맥파를 측정하기 위해 압력센서를 이용한다. 이러한 맥진기에 사용되는 맥진 센서 모듈은 압력센서와 압력센서의 와이어링을 보호하기 위한 코팅이 사용되는데, 코팅의 재질 또는 모양에 따라 측정 겨로가에 영향을 미칠 수 있다. 본 논문에서는 맥진센서에 압력을 가하였을 때 PDMS 코팅 형태에 따라 압력센서에 전달되는 응력분포를 비교하기 위해 6종류의 코팅모델에 두 가지 방법의 압력을 가하여 유한요소해석을 실시하였다. 결과적으로 맥진센서 중앙에 압력을 가하여 해석을 수행 하였을 때 맥진센서 모듈의 PDMS 코팅두께를 0.3mm씩 줄일수록 중앙의 압력센서에 전달되는 응력은 24%씩 증가하였고 주변의 압력센서로 전달되는 응력은 4.9%씩 감소하였다. 그리고 코팅에 가이드가 있는 경우 주변 압력센서로 전달되는 응력의 비율이 2.7% 더 적게 나타났다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2009년도 학술대회 초록집
• /
• pp.198-202
• /
• 2009

스플릿 홉킨슨 압력 봉(SHPB)실험은 암석 및 콘크리트와 같은 취성재료의 동적 물성과 변형특성을 파악하고 압축 응력-변형율 데이터를 획득하기 위하여 사용된다. SHPB 실험법은 원리상 대상시료가 파괴이전에 동적응력평형 상태와 일정 변형율 속도 조건하여 놓여져 있어야 한다. 이러한 조건을 만족시키기 위하여 충격봉과 입사봉의 충격에 의하여 발생되는 충격 입사파형을 제어할 필요가 있다. 최근에는 원형 디스크를 충격봉과 입사봉 사이에 두어 입사 충격파형을 제어하는 펄스쉐이핑 기법이 적용되고 있다. 본 연구에서는 입사 충격파형을 정밀하게 제어할 목적으로 다양한 형태와 크기의 금속디스크를 대상으로 SHPB 실험을 수행하여 동적 변형 특성을 파악하였다. 펄스쉐이퍼의 두께와 직경이 작아짐에 따라 응력값과 파장은 증가하였다.

• 한국표면공학회지
• /
• 제21권1호
• /
• pp.19-27
• /
• 1988

The principe and practice of pulse plating, and prospect in the future on pulse plating are reviewed. Some of the advantages of pulse pulse plating are detailed as compared with DC plating. The advantages of pulse plating are summarized as follows: 1)smooth and fine grained deposits 2) reduction in hydrogen embrittlement of deposits 3) reduction of residual stress and microcracks in the deposit 4) improvement of physical properties 5) uniform alloy composition through the deposit thinkness 6) improved thrower and adhesion.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.634-637
• /
• 2004

This paper presents a Split Hopkinson Pressure Bar(SHPB) technique to obtain compressive stress-strain data for rubber materials. An experimental technique that modifies the conventional Split Hopkinson Pressure Bar(SHPB) has been developed for measuring the compressive stress-strain responses of materials with low mechanical impedance and low compressive strengths such as rubber. This paper introduces an all-polymeric pressure bar which achieves a closer impedance match between the pressure bar and the specimen materials. In addition, we are a pulse shaper to lengthen the rising time of the incident wave to ensure stress equilibrium and homogeneous deformation of a rubber materials. It is found that the modified technique can be determine the dynamic deformation behavior of an NBR rubber more accurately.

• Journal of Korean Biological Nursing Science
• /
• 제14권1호
• /
• pp.41-48
• /
• 2012

Purpose: This experimental research explored the effects of aroma inhalation on blood pressure, pulse, sleep, stress, and anxiety in patients with essential hypertension who are taking antihypertensive medication. Methods: A pilot survey, pre-test and post-test were conducted. The data were collected from August to October, 2009. The participants were 44 patients randomly assigned to an experimental group (22 people) and a control group (22 people). The experimental group received individual instruction for aroma inhalation, which lasted for 3 minutes. They inhaled blended oils of Lavender, Majoram and Ylang Ylang (The mixed ratio was 4:3:3), three times a day, for two weeks. Data from 36 patients were used for the final analysis (20 from the experimental group, 16 from the control group). Data were analyzed using SPSS version 13.0. Results: Sleep disturbance decreased in the experimental group (t=-2.258, $p$=.030). Blood pressure, pulse, stress, and anxiety were not significantly different between the two groups ($p$ >.05). Additional analysis of the experimental group showed that physical stress and psychological stress were significantly lowered. Conclusion: Aroma inhalation is an effective paramedical intervention for patients with essential hypertension.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.685-688
• /
• 2000

Pulse plating is about to deposit material at high current density compared to conventional DC plating. For example pulse plating can get more fine grain can improve adhension and metal distribution and current efficiency can reduce internal stress and crack. therefore we studied pulsed power supply which has high current density and improve deposition quality and increase plating speed in this paper.