• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.985-992
• /
• 2013

Polytrimethylene terephthalate(PTT) offers several advantageous properties such as good tensile strength, uniformity, stiffness, toughness, UV stability, resilience, stain resistance, outstanding elastic recovery, and dyeability. The effects of annealing temperature on physical properties and the structure of PTT filaments and yarn were investigated by measuring wide-angle X-ray diffraction (WAXD), density, optical birefringence, dynamic visco elasticity, and tensile testing. The intensity of maximum tan ${\delta}$ decreased and the temperature of maximum tan ${\delta}$ shifted to a higher temperature as the annealing temperature of filaments increased; however, it shifted to a lower temperature when the annealing temperature exceeded $130^{\circ}C$. In addition, crystallinity, density and D-spacing of (010) crystal face increased as the annealing temperature increased. Optical birefringence and specific stress were almost constant up to $100^{\circ}C$ and then decreased above $130^{\circ}C$. The shrinkage of PTT filament is 0 in boiling water when annealed above $130^{\circ}C$; consequently, the use of annealed fiber above $130^{\circ}C$ can remove thermal instability when dyeing PTT fiber. In the case of yarns, the thermal stability and physical properties of yarns showed the best effect when the ply number is less than 5, twist number is less than 400tpm, and the annealing time is 20minutes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.8
• /
• pp.1277-1286
• /
• 2001

Aluminum 5052/Aramid Fiber Reinforced Plastic(Al5052/AFRP) laminates are applied to the fuselage-wing intersection. The Al5052/AFRP laminates suffer from the cyclic bending moment of variable amplitude during the service. Therefore, the influence of cyclic bending moment on the delamination and the fatigue crack propagation behavior in Al5052/AFRP laminate was investigated in this study. Al5052/AFRP laminate composite consists of three thin sheets of Al5052 and two layers of unidirectional aramid fibers. The cyclic bending moment fatigue tests were performed with five different levels of bending moment. The shape and size of the delamination zone formed along the fatigue crack between Al5052 sheet and aramid fiber-adhesive layer were measured by an ultrasonic C-scan. The relationships between da/dN and ΔK, between the cyclic bending moment and the delamination zone size, and between the fiber bridging mechanism and the delamination zone were studied. Fiber failures were not observed in the delamination zone in this study. It represents that the fiber bridging modification factor should turn out to increase and that the fatigue crack growth rate should decrease. The shape of delamination zone turns out to be semi-elliptic with the contour decreased non-linearly toward the crack tip.

• Journal of Preventive Medicine and Public Health
• /
• v.36 no.1
• /
• pp.71-76
• /
• 2003

Objectives : New organizational work systems, and their impact on the mental health of employees, are considered to beone of the most important topics in the area of industrial health. This study was conducted to compare job characteristics (job demand and decision latitude) levels, and psychosocial distress of workers in acompany introducing to new organizational work systems, to those of workers managed by traditional work systems. Methods ; A study sample of 627 shipbuilding workers (446the new work organizational system and 181 the traditional system) were recruited for this study. A structured-questionnaire was used to assess general characteristics, job characteristics(work demand, decision latitude), and psychosocial distress. Results : The decision latitude was not significantly higher in the new work system compared to the traditional system. However, the job demand was significantly higher in the new work system than in the traditional system. The psychosocial distress was higher within the new work system than the traditional system, but no significant relationships were found. The proportion of increased strain was significantly greater with the new system than the traditional system. Conclusion : These results suggest that increases in the decision latitude did not sufficiently compensate for higher job strain or increased work intensity. If the increase in the decision latitude was temporary, with the typical job demand remaining high, such work can be still be considered to have a job strain Futureresearch should consider psychosocial distress and fatigue as importantproblems caused by new work organizational systems, and should be performed to assess their impact through out industry.

• Journal of Preventive Medicine and Public Health
• /
• v.50 no.5
• /
• pp.320-327
• /
• 2017

Objectives: The purpose of our study was to evaluate the association between the intensity of physical activity (PA) and prevalence of cardiovascular disease (CVD) using Korean representative data. Methods: We analyzed 39 804 participant data from the Korea National Health and Nutrition Examination Survey, 2007-2013. Exposure variable was three levels of PA (low, medium, and high) in a week, and outcome variable was prevalence of CVD based on patient self-recognition and doctor's diagnosis. Complex logistic regression analysis was performed to evaluate the relationship between level of PA and CVD adjusted by body mass index, hypertension, hypercholesterolemia, diabetes mellitus, stress recognition, household income, smoking, and current drinking. The indices of association w ere estimated as crude prevalence odds ratio (POR), adjusted POR, and their 95% confidence interval (CI). All statistical analyzes were performed using complex sample analysis procedure of the SPSS version 23.0. Results: When all variables were adjusted, only high level PA in women showed a significant association with stroke (adjusted POR by patient's self-recognition, 0.57; 95% CI, 0.32 to 0.99, adjusted POR by doctor's diagnosis, 0.55; 95% CI, 0.34 to 0.87) and CVD (adjusted POR by doctor's diagnosis, 0.68; 95% CI, 0.48 to 0.96). Conclusions: High level PA in women has a significant reverse association with prevalence of stroke and CVD in Korea. Further study for elucidating the mechanism will be needed.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.27 no.1
• /
• pp.37-44
• /
• 2007

To investigate the response of proline and ammonia to pathogen infection, plant growth and relevant chemical component were examined in large patch-infected or healthy (control) zoysiagrass during 6 days after treatment. Pathogen-infection increased root mortality by 30% compared to control. Soluble protein was not significantly affected by pathogen-infection except in the leaf at day 6. Ammonia concentration also increased significantly in both leaves and roots of pathogen-infected plants. Proline concentration in leaves and roots increased to 3.4- and 4.5-fold, respectively, compared to those of control at day 6. These results suggest that proline accumulation may be a sensitive biochemical indicator representing the stress intensity caused by pathogen infection in zoysiagrass.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.87-95
• /
• 2005

Laser sealing/cutting technique, one of the 4 core technologies to manufacture self-luminous glass tubes (SLGTs) has been developed. Through the analysis of commercial products it is found that Pyrex Is used for SLGTs. A CO2 laser, which is commonly used for glass work was used for the study The factors affecting the sealing/cutting were laser intensity, duration. Irradiation method, and pressure inside the tube. The whole Process is composed of 2 stages. In the first stage. both ends of the tubes are sealed while tritium is insected in the tubes. And the tritium sealed tubes are cut in the desired size in the second stage. Defocused beam was used for seal ing and focused beam was used for cutting. After the sealing/cutting, the tubes were heat treated to prevent fracture due to the residual heat stress.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 1997.12a
• /
• pp.101-101
• /
• 1997

Comet assay, single cell gel electrophoresis has been known as useful, rapid, simple, visual, and sensitive technique for measuring the DNA breakage in mammalian ce1ls. For evaluation of DNA damage using comet assay, early studies reported a change in comet length and intensity with DNA damage using simple visual technique, such as fluorescence microscopy with eyespiece. In recent, some workers are observing and analyzing nucleotide of comets using quantitative fluorescence image analysis system to estimate 'tail moment', which is defined as the product of the tail length and the fraction of total DNA in tail. Our laboratory also adopted the image analysis software for qualification. In addition, many of the practical features of comet assay render it potentially attractive as useful tool for molecular toxicology and carcinogenesis, because the system is already showing considerable promise as rapid predictor in both in vitro and in vivo experimental designs. Recently, the comet assay becomes a attractive technique to study of apoptosis, because apoptotic fragmentation of nuclear DNA into nucleosomal sizes can be evaluated by the comet assay. So, we attempted to apply the comet assay to studying the effect of various stress on the apoptosis-sensitive cell lines. Particularly, focusing on the hyperthermic apoptosis, we could find that heat shock(44˚C for 60 minutes) was sufficient to induced apoptosis in these cell lines. But using the highly sensitive comet assay, we could not detect DNA breaks immediately after heat shock.

• Journal of the Korean Society for Railway
• /
• v.12 no.1
• /
• pp.16-24
• /
• 2009

In this study, fatigue crack growth rate of a cracked railway bogie frame under variable amplitude loading is predicted by applying linear elastic fracture mechanics. For this purpose, we find the critical points by reference surveying on cracked railway bogie frames. And we make an effective load history by synthesizing the dynamic load measured from the critical points of railway bogie frame during commercial line operation and the static load calculated from structural analysis. Crack growth analyses are performed at the 3 critical points under the commercial operation loading condition by assuming an initial crack size as 40 mm. and the results are compared with the experimental results from Japanese railway bogie frame crack growth case. From the analysis results, we find that around 500,000 km operating distance is necessary to bring crack growth from the initial crack to unstable crack. And it takes around 3.8 normal operating years. We conclude that it is enough time to detect the crack between normal maintenance period.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1871-1880
• /
• 2020

Round robin analyses for vessel failure probabilities due to PTS events are proposed for plant-specific analyses of all types of reactors developed in Korea. Four organizations, that are responsible for regulation, operation, research and design of the nuclear power plant in Korea, participated in the round robin analysis. The vessel failure probabilities from the probabilistic fracture mechanics analyses are calculated to assure the structural integrity of the reactor pressure vessel during transients that are expected to initiate PTS events. The failure probabilities due to various parameters are compared with each other. All results are obtained based on several assumptions about material properties, flaw distribution data, and transient data such as pressure, temperature, and heat transfer coefficient. The realistic input data can be used to obtain more realistic failure probabilities. The various results presented in this study will be helpful not only for benchmark calculations, result comparisons, and verification of PFM codes developed but also as a contribution to knowledge management for the future generation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.1
• /
• pp.61-70
• /
• 2005

This study investigated the spinal loads(L5/S1 disc compression and shear forces) predicted from four biomechanical models: one EMG model and three optimization models. Three objective functions used in the optimization models were to miminize 1) the cubed muscle forces : MF3, 2) the cubed muscle stress : MS3, 3) maximum muscle intensity : MI. Twelve healthy male subjects participated in the isometric voluntary exertion tests to six directions : flexion/extension, left/right lateral bending, clockwise/ counterclockwise twist. EMG signals were measured from ten trunk muscles and spinal loads were assessed at 10, 20, 30, 40, 50, 60, 70, 80, 90%MVE(maximum voluntary exertion) in each direction. Three optimization models predicted lower L5/S1 disc compression forces than the EMG model, on average, by 31%(MF3), 27%(MS3), 8%(MI). Especially, in twist and extension, the differences were relatively large. Anterior-posterior shear forces predicted from optimization models were lower, on average, by 27%(MF3), 21%(MS3), 9%(MI) than by the EMG model, especially in flexion(MF3 : 45%, MS3 : 40%, MI : 35%). Lateral shear forces were predicted far less than anterior-posterior shear forces(total average = 124 N), and the optimization models predicted larger values than the EMG model on average. These results indicated that the optimization models could underestimate compression forces during twisting and extension, and anterior-posterior shear forces during flexion. Thus, future research should address the antagonistic coactivation, one major reason of the difference between optimization models and the EMG model, in the optimization models.