• 접착 및 계면
• /
• 제10권3호
• /
• pp.117-126
• /
• 2009

에폭시/산무수물 경화제계에 실리카를 필러로 사용하여 에폭시 접착제의 경화거동과 특성을 알아보았다. DSC와 stress rheometer를 이용하여 측정한 에폭시 수지의 경화거동에서는 승온 속도를 증가시키거나 등온에서 경화 온도가 높을수록 gelation 온도는 높아졌으나 경화도는 감소함을 확인하였다. 열 안정성은 실리카 간의 응집 및 수분으로 인해 미세한 질량 감소 차이 외에 실리카 함량에 따른 변화는 없는 것으로 나타났다. 실리카가 첨가된 경화물의 열팽창계수는 실리카를 30 wt% 첨가하였을 때 약 33%의 감소하여 $40ppm/^{\circ}C$ 임을 확인하였다. 동역학적인 물성은 필러를 첨가하지 않은 시편의 저장탄성률(2,377 MPa)에 비해 30 wt%의 실리카 함량이 첨가된 시편의 저장탄성률(3,909 MPa)은 약 60% 증가하였다. 실리카의 표면을 실란 커플링제로 처리한 시편의 경우 저장탄성률이 감소하였다.

• 한국유기농업학회지
• /
• 제24권4호
• /
• pp.869-879
• /
• 2016

The present study was conducted to evaluate the effects of dietary formulated feed additive on growth performance and carcass traits of Hanwoo steers. A formulated feed additive reported to reduce heat load in the rumen in our previous research was used (Cho et al., 2014). Total 32 herds of Hanwoo steers were assigned into two groups of control and treatment. Total mixed ration was provided as basal diet for cattle and 100 g of additive was supplemented on diet for treatment. Feeding trial was performed during 120 days before slaughter. For growth performance, 3 periods (0~90 days; 90~120 days; 0~120 days) were allotted and average daily gain, feed requirement and final body weight were determined. Loin meat between $12^{th}$ and $13^{th}$ rib was used for meat quality analysis after slaughtering. Only $1^{st}$ period showed significantly improved growth performance of treatment (P<0.05) and there were no significant difference in other periods. At $3^{rd}$ periods (overall), a trend of increased average daily gain was found at treatment (P=0.075). Carcass performance and quality did not show significant differences between treatment and control (P>0.05). In meat quality, treatment showed significant increment in all measured meat colors (P<0.05) and significantly less sharing force compared to the control (P<0.05). Although no significant difference in growth performance and carcass yield were found, remarkably improved economic status was detected in treatment group. In conclusion, it could be suggested that application of a formulated feed additive specialized in reduction of heat load in the rumen was able to increase economical balance through enhancing heat stress condition of ruminant and growth.

• 한국지반신소재학회논문집
• /
• 제10권2호
• /
• pp.13-19
• /
• 2011

PC 암거는 터파기, 하부지반 처리, 암거 거치, 상호접합면에 누수방지용 패킹재 부착, PS 강선의 긴장을 통한 상호박스 접합, 되메우기 등의 일련의 과정으로 시공되어진다. 이 때 부적절한 하부지반 처리는 박스간 상호 부등침하를 야기할 수 있으며 결과적으로 지하수의 와류 및 내부유수의 누수를 발생시키게 된다. 본 연구에서는 하부지반이 연약한 경우 PC 암거 접합부의 부등침하를 저감하기 위하여 개발된 PC 기초판과 일체화된 암거의 거동을 현장 시험시공을 통해 분석하였다. 암거의 거동은 접합부에서 암거간의 벌어짐, 하부지반에 작용하는 토압 증가량, 암거 상부의 침하량 계측을 통해 분석되었으며, 분석결과로부터 PC 기초판과 일체화된 암거가 일반적인 시공방법인 PS 강선의 인장으로 체결된 암거에 비하여 침하 및 접합부에서 벌어짐이 적게 발생하는 것으로 나타났다.

• 동력기계공학회지
• /
• 제15권6호
• /
• pp.67-72
• /
• 2011

In the present study, crack healing effect and residual stress of $Al_2O_3$ ceramics were investigated by changing the sintering temperature and heat treatment conditions. And also it was investigated that the influence of different filler loadings of nano-sized SiC particles on the crack healing behavior of $Al_2O_3$ ceramics. The test samples were characterized by three point bend flexural tests to evaluate their mechanical properties. The morphological changes were studied by FE-SEM and EDS. The test results indicated that the $Al_2O_3$ with nano-sized SiC ceramics sintered at $1800^{\circ}C$ were showed highest density. Sintering temperature at $1800^{\circ}C$, the bending strength of heat treatment in air atmosphere specimens showed about 42 % increment in comparison to the un-heat treated specimens. The cracked specimens can be healed by heat treatment in vacuum atmosphere but the crack healing effect of $Al_2O_3$ ceramics, which is heat treated in air atmosphere was higher than that of heat treated in vacuum atmosphere. $Al_2O_3$ with 30 wt% of SiC ceramics indicated higher crack healing ability than that with 15 wt% of SiC ceramics. The FE-SEM images showed that the median cracks and pores were disappeared after heat treatment in air.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 1호
• /
• pp.269-273
• /
• 1999

Combination of mental stress task with noise background is a traditional tool employed in psychophysiology. However, intensity of background noise is a factor affecting both performance on test and psychophysiological responses associated with stress evoked by mental load in noisy environment. In the current study on 7 subjects we analyzed the influence of white noise (WN) intensity (55, 70, and 85 dB[A] ) on psychophysiological responses during word recognition test performed on noise background. There were recorded following physiological variables: electrodermal activity (EDA) , namely, skin conductance level (SCL), skin conductance response (SCR) amplitude (SCR-A), rise time and total number of SCRs (N-SCR); cardiovascular activity, e.g., heart rate (HR), respiratory sinus arrhythmia (RSA) index, pulse transit time (PTT), finger pulse volume (PV), skin temperature (SKT) and respiratory activity, such as respiration rate (RESP-R) and inspiration wane amplitude (RESP-A) during baseline resting state and 40 s long performance on 3 similar Korean word recognition tests with different WN intensity (55, 70, and 85 dB). Electrodermal responses (SCR-A, SCL, N-SCR) demonstrated gradual increment with increased intensity of noise, and this increase of response magnitude with higher intensity of noise was typical also for r skin temperature (phasic SKT decrease) and pulse volume (phasic and tonic PV decrease). However, some cardiovascular and respiratory responses did not exhibit same tendency of gradual increase of reactivity , namely HR, as well as RESP-R and RESP-A showed decrement of response magnitudes. Important finding in terms of cardiovascular reactivity was that 55 and 70dB evoked similar profiles, while 85dB WN resulted in significantly different profile of reactions, suggesting that there exists a threshold level after which intensive auditory stimulation elicits psychophyslological responses pattern of different quality. There are discussed potential autonomic mechanism involved in mediation of observed physiological responses.

• 한국가스학회지
• /
• 제15권4호
• /
• pp.15-20
• /
• 2011

본 연구는 매설 조건이 불건전한 건설 현장에 매설된 삼중관이 항타 진동에 노출되었을 경우에 발생하는 배관의 거동을 매설 심도에 따라 분석하였다. 매설 배관으로부터 20m의 이격 거리를 갖는 항타 에너지는 7tonf의 램이 1.2m에서 낙하하였을 경우로 선정하였고, 매설 심도는 0.6, 1.4, 2.2, 3.0, 3.8m로 변화하여 연구를 진행하였다. 관의 길이방향 중심에서의 진동 속도와 응력을 확인 하였고, 감쇠비를 고려하여 삼중관의 거동을 분석하였다. 이격거리가 동일한 경우의 진동 속도에 대한 감쇠율은 매설 심도가 증가함에 따라 증가하는 추세를 보이고 있다. 또한, 내관에서 응력 감쇠율도 매설 심도가 증가함에 따라 증가하는 추세를 보이고 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제18권4호
• /
• pp.86-101
• /
• 1990

The primary objective of this research was to investigate the strength properties of Comply, a composite panel. fabricated with particle board as core material and veneer or plywood as face and back. 20types of comply composites were manufactured according to the four specific gravity levels(0.5, 0.6, 0.7 or 0.8) of particleboard core and three veneer or two plywood thicknesses for face and back. They were tested and compared with matching particleboard (control) on moisture content. specific gravity, bending properties(MOE, MOR SPL). nail resistance and internal bond strength. The obtained results were summarized as follows: The increasing effect of modulus of elasticity was shown by the increase of face and back veneer or plywood thickness. The modulus of rupture and stress at proportional limit of the comply composites bonded with 3mm thick veneers or 3mm thick plywood face and back were higher than 2mm thick veneer or 2mm thick plywood as face and back. Both of modulus of rupture and stress at proportional limit on bending of Comply were higher than those of control board. Also the modulus of elasticity of Comply showed much higher than that of control board. The nail resistance of Comply, composed of plywood as face and back was higher than that of veneer. The nail resistance of control board was higher than that of Comply at Sp.Gr 0.7 and 0.8 core boards. Internal bond of Comply, composed of 1mm and 2mm thick veneer as face and back was higher than that of 3mm thick veneer. The increasing effect of modulus of elasticity was shown by the increase of shelling ratio in Comply composed of veneer and plywood as face and back. The modulus of rupture was increased by the increment of shellmg ratio in Compiy, composed of plywood as face and back. The modulus of elasticity and modulus of. rupture of comply were higher than those of particleboard(control) in effect of shelling ratio. Therefore it was concluded that the mechanical property values of Comply were clearly greater than those of particleboard(control).

• Computers and Concrete
• /
• 제15권4호
• /
• pp.687-707
• /
• 2015

A finite element computer code for short-term analysis of steel-concrete composite structures is extended to study long-term effects under service loads, in the present work. Long-term effects are important in engineering design because they influence stress and strain distribution of the structural system and therefore contribute to the increment of deflections in these structures. For creep analysis, a rheological model based on a Kelvin chain, with elements placed in series, was employed. The parameters of the Kelvin chain were obtained using Dirichlet series. Creep and shrinkage models, proposed by the CEB FIP 90, were used. The shear-lag phenomenon that takes place at the concrete slab is usually neglected or not properly taken into account in the formulation of beam-column finite elements. Therefore, in this work, a three-dimensional numerical model based on the assemblage of shell finite elements for representing the steel beam and the concrete slab is used. Stud shear connectors are represented for special beam-column elements to simulate the partial interaction at the slab-beam interface. The two-dimensional representation of the concrete slab permits to capture the non-uniform shear stress distribution in the horizontal plane of the slab due to shear-lag phenomenon. The model is validated with experimental results of two full-scale continuous composite beams previously studied by other authors. Results are given in terms of displacements, bending moments and cracking patterns in order to shown the influence of long-term effects in the structural response and also the potentiality of the present numerical code.

• 대한조선학회논문집
• /
• 제34권1호
• /
• pp.68-76
• /
• 1997

본 논문에서는 선박 및 해양 구조물을 구성하는 용접 판구조물의 변형 및 잔류응력 등 용접 초기 결함을 효율적으로 평가할 수 있는 열탄소성 해석방법을 정립하였다. 또한 평판의 선상가열공법(line heating process)을 열탄소성 시뮬레이션함으로써 작업의 고능률화 및 자동화를 위한 기초연구를 수행하였다. 판구조물에 대한 열전도 해석을 수행하기 위하여 해석적인 방법과 수치적인 방법을 병행하였다. 판구조물의 열탄소성 해석방법에 있어서는 초기변형도법에 근거한 유한요소법을 사용하였으며, 증분 구간중 소성 구역에서는 응력 증분 및 항복응력 중분의 2 차항까지 고려해서 시간 증분을 최적 제어함으로써 해석 불능에 빠지는 문제를 극복하였다. 특히 응력 중분에 탄성계수의 온도에 따른 증분을 2 차항까지 포함시켰다. 평판의 두께와 입열량을 변화시키면서 일련의 용접 열탄소성 실험을 수행하였는 바, 온도 및 용접 변형을 계측하여 수치 계산 결과와 비교하여 상호 부합성이 양호함을 확인하였다.

• 한국지반신소재학회논문집
• /
• 제13권4호
• /
• pp.11-20
• /
• 2014

짧은 보강재를 적용한 강성벽 일체형 보강노반의 시공 중 거동에 대하여 고찰하고 안정성을 평가하였다. 우선 시공하중 상태에서 안정성이 확보될 수 있는 최소보강재 길이에 대한 이론적 고찰을 수행하고, 기존 설계기준 적용 보강재 길이(70%, 0.70H)와 짧은 보강재(35%, 0.35H) 및 장 보강재를 혼용하는 보강재 설치 패턴에 대한 경제성을 비교하였다. 높이의 30%(0.30H), 35%(0.35H), 40%(0.40H) 적용 보강노반의 시공 중 안정성을 검증하기 위하여 실물 단선용 철도노반 높이*폭*길이(5m*6m*20m)에 대한 현장시공을 실시하였다. 총 51개의 센서를 노반 내부 및 보강재에 설치하여 침하, 배부름 및 응력 변화를 확인하였다. 이를 통하여 짧은(0.35H, 높이의 35%) 지오그리드를 적용한 보강노반의 변형 및 발생 응력수준이 시공 중 안정성을 확보할 수 있는 허용범위 이내인 것을 확인할 수 있었다.