• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.185-187
• /
• 2005

The reactor pressure vessel head of PWR has penetrations for control rod drive mechanism and instrumentation systems. The Primary coolant water and operating temperature can cause the stress-corrosion cracking of these nickel-based alloy penetrations. It is difficult to detect and size flaws such as SCC in the reactor head penetrations using conventional W methods because of complex geometry, Therefore, the utilities are using the TOFD technique for the detection and sizing of the flaw. This study shows the correlation between the ultrasonic wave direction and the orientation of the flaw and the range of flaw depth which can be detected by the TOFD techniques.

• Earthquakes and Structures
• /
• v.24 no.3
• /
• pp.193-204
• /
• 2023

The concept of meta-material-based isolation systems (MMIS) for structural columns has been revisited in the present study in order to enhance the stability of rubber pads by using steel shim reinforced rubber (SSRR) layers. Analytical calculations have shown a significant improvement in the stability of MMIS with SSRR pads. Finite element analysis has also been conducted to further show the reduced response of a bridge with the modified MMIS under excitations having frequencies within the corresponding attenuation zone (AZ) as compared to the response of a conventional bridge without MMIS. FE analysis further shows the stress generated on the bridge with MMIS systems are within safe limits. Finally, a generalized procedure has been developed to design bridge columns with the proposed modified MMIS.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.411-420
• /
• 2016

The objective of this study was to determine the effect of drinking water containing trimethyl glycine or ascorbic acid on growth performance and blood parameter profiles of duck exposed to scorching heat stress. A total of 480 ducks were randomly assigned to the following eight experiment groups for 42 days : control group C with general water, treatment group 1 (T1) with drinking water containing 100 ppm ascorbic acid, treatment group 2 (T2) with drinking water containing 200 ppm ascorbic acid, treatment group 3 (T3) with drinking water containing 300 ppm ascorbic acid, treatment group 4 (T4) with drinking water containing 400 ppm trimethyl glycine, treatment group 5 (T5) with drinking water containing 800 ppm trimethyl glycine, treatment group 6 (T6) with drinking water containing 1,200 ppm trimethyl glycine, treatment group 7 (T7) with electrolytes of KCl (0.5%) + $NaHCO_3$ (1.0%)+NaCl (0.5%). Our results revealed that the body weights and feed intakes of treatment groups, especially T3 and T6, were increased compared to the control group, where as the feed conversion ratios of treatment groups were decreased (p<0.05). Blood levels of total cholesterol, triglyceride, LDL-C, glucose, AST, ALT and pH in treatment groups were lower compared to those in the control group (p<0.05). Blood levels of red blood cell, platelets profiles, electrolyte and gas in treatment groups were higher compared to those of the control group (p<0.05).

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.12
• /
• pp.5217-5221
• /
• 2016

Objective: A study of primary cancer morbidity among children and subsequent calculation of average annual incidence were carried out for boys and girls, and young men and women in Kazakhstan. Methods: The investigated population lived in three areas of the Aral Sea region: designated catastrophe (Aral, Kazalt, Shalkar regions), crisis (Zhalagash, Karmakshy, Shiely regions), pre-crisis (Irgiz, Arys, Ulytau regions). Zhanaarka region of Karaganda oblast was applied as a control. Parameters were retrospective analyzed for the 10 years from 2004 to 2013. Result: The results indicate that indices of children cancer morbidity were slightly higher in the Aral Sea region than in the control district, but they were comparable with similar data from studies in other regions. In all areas of the Aral Sea region, except for Ulytau, primary cancer morbidity exceeded the control level by 1.3-2.7 times (4.7%000). Hematological malignancies, including solid tumors - tumors of musculoskeletal system and skin, digestive system, brain and central nervous system predominated. Stress levels in zones of the Aral Sea region were slightly higher in the crisis zone than in the catastrophe zone that can be explained by the phenomenon of wave-like dynamics of disease growth risk. Gender differences in characteristics of malignancy formation were not more pronounced in the studied region. Conclusion: Indices of children cancer are slightly higher in the Aral Sea region than in the control area of Kazakhstan, but they are comparable to results for other regions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.1
• /
• pp.76-83
• /
• 2011

This paper focuses on the thermal design of a signal processor in Micro-Wave Seeker. High temperature environment and ESS(Environmental Stress Screening) test condition should be considered in designing a signal processor. First, we performed the thermal analysis to know conditions under which a signal processor is thermally reliable. As a result of thermal analysis, we found that adopting heat transfer block to the thermally fragile components is most efficient, because the heat transfer block can control the thermal loads of the individual components. Next, we verified this solution by numerical simulation and experiment and concluded that thermal reliability of a signal processor can be achieved. Maximum temperature difference between numerical simulation and experiment is about $2^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.268-276
• /
• 2021

As wireless communication devices become more common, interests in how to control the electromagnetic waves generated from the devices are increasing. One of the most commonly used electromagnetic wave control materials is magnetic one, but due to the features that make the product heavy and thick when applied to the product, it is difficult to use them in curved electronic devices. Therefore, a polymer flexible meta electronic device has been presented to sort out the problem, which is thin and can have various curvatures. However, it requires an additional evaluation of curvature reliability. In this study, we developed a method to predict electromagnetic wave control characteristics through the resistance/length of the conductive ink line patterns of polymer flexible meta electronic devices, which is inversely proportional to the electromagnetic wave control characteristics. As the radius of curvature decreased, the resistance/length increased, and there was little variations with the duration times of curvature. We also found that both permanent and recoverable changes along with the removal of curvature were occurred when the curvature was applied, and that the cause of these changes was newly created vertical cracks in the conductive ink line pattern due to the tensile stress applied by applying curvature.

• Korean Chemical Engineering Research
• /
• v.52 no.5
• /
• pp.558-563
• /
• 2014

To study the effects of fabrication methods on the performance and durability of polymer electrolyte membrane fuel cells (PEMFCs), membrane-electrode assemblies (MEAs) were fabricated using a Dr blade method, a spray method, screen print method and screen print + spray method. The performance of single cells assembled with the prepared MEAs were initially measured and compared. Electrode accelerated stress testing (AST) involving a potentiostatic step-wave with 10 s at 0.6 V followed by 30 s at 0.9 V was applied to test durability of MEAs. Before and after 6,000cycles of the AST, I-V curves, impedance spectra, cyclic voltammograms, linear sweep voltammetry (LSV) and transmission electron microscope (TEM) were measured. Under the operating conditions, the Dr Blde MEA exhibited the highest initial performance. After electrode accelerated stress testing, screen print + spray MEA showed lowest degradation rate.

• Journal of the Korea Convergence Society
• /
• v.11 no.8
• /
• pp.223-228
• /
• 2020

The need to steadily manage healthy hair for a beautiful hairstyle is emerging, and it is time to develop hair cosmetics using natural antioxidants that are harmless to the human body according to the needs of the times. Therefore Max. Load, Max. Stress, Max. Elongation, and breakage on the hair coated with the extract of Ginkgo biloba L. According to the Break Load, Break Stress, Break Elongation, Max. Various convergence property experiments such as modulus and Tangential modulus values were conducted. As a result of research, the hairs coated with Ginkgo biloba extract had an overall increase in intrinsic properties including tensile strength compared to the control group. Through this study, we intend to study the potential of Ginkgo biloba L. as a useful material for hair cosmetics such as permanent wave preparations as well as health supplements and medicines that have been released, and we expect that it will be provided as useful research data for the subsequent development of various hair cosmetics.

• Biomedical Science Letters
• /
• v.12 no.1
• /
• pp.9-16
• /
• 2006

We investigated the effects of 835-MHz electromagnetic field (EMF), one of the most popular communication frequency band in Korean code-division multiple-access (CDMA) mobile phone system, on cellular signal transduction. For this, we examined the change of intracellular calcium $([Ca^{2+}]_i)$, reactive oxygen species (ROS) and F-actin polymerization after exposure to 835-MHz EMF followed by the treatment of agonists in Rat-2 fibroblast cells. Culture cells were pretreated with serum-tree medium and concomitantly exposed to 835-MHz at specific absorption rate (SAR) of 4.0 W/kg for 24 hr in a specialized designed apparatus based on Transverse Electro Magnetics (TEM) wave theory. Intracellular $Ca^{2+}$ responses to lysophosphatidic acid (LPA) and epidermal growth factor (EGF) in Rat-2 fibroblast after exposure to 835-MHz EMF were shown to be similar pattern as observed in normal cultured cells. However, the LPA-induced calcium spiking was slightly delayed to 7 sec and sustained thereafter to a little higher ground level under 835-MHz EMF radiation compared to unexposed cells. ROS production level by LPA in the exposed cells was not different from that in control. Furthermore, LPA induced the production of stress fibers with no significant difference in the exposed and unexposed cells. These results suggest that mobile phone radiation (835-MHz, SAR 4.0 W/kg) may not be directly related to signal transduction in Rat-2 fibroblasts except the slight effect of calcium spiking in LPA-induced cells but remain to be further elucidated for possible indirect intervention.

• Journal of Korean Academy of Nursing
• /
• v.39 no.3
• /
• pp.376-385
• /
• 2009

Purpose: The purposes of this study were(a) to identify smoking behavior by following a cohort representative of the population of 4th grade elementary schoolers in South Korea over a four-year period(2004-2007), and(b) to explore predictors of smoking initiation among non-smokers in Wave 1. Methods: Secondary data, the Korea Youth Panel Study, was analyzed in this study. First, frequencies or percentages were calculated to identify smoking behavior(i.e., smoking initiation, smoking intensity, and smoking duration). Second, binary logistic regression analysis was performed to examine significant factors related to smoking initiation. Results: Smoking initiation and daily smoking were more pronounced when the participants entered middle school. In bivariate analysis, statistically significant predictors of smoking initiation were loneliness at school, self-control, delinquent behavior, depressive symptoms, and stress. However, after controlling for other factors, only a high level of risk-taking tendency and a greater number of delinquent behaviors remained statistically significant. Conclusion: Based on greater involvement in smoking among first-year middle schoolers, smoking prevention strategies should be provided to elementary schoolers rather than middle schoolers. A risk-taking tendency and delinquent behaviors should be considered as proxy measures to detect the high-risk group for smoking initiation.