• 제목/요약/키워드: Stress Relaxation Test

검색결과 170건 처리시간 0.023초

침지저장액에 따른 두부의 물성 변화에 관한 연구 (Studies on the physical properties of soybean curd stored in the solution of different salt concentration)

  • 장원영;신동훈;김병용
    • Applied Biological Chemistry
    • /
    • 제38권2호
    • /
    • pp.135-140
    • /
    • 1995
  • 여러 소금농도$(0{\sim}5%)$에 따라 만든 침지액에 침지한 두부를 여러 저장온도$(5{\sim}25^{\circ}C)$에서 저장하는 동안, 침지액의 화학적 변화 및 두부 조직 변화를 측정하였다. $0{\sim}3%$의 소금으로 만든 침지액과 비교하여 볼때 5%의 소금으로 만든 두부 침지액에서 pH의 감소가 뚜렷이 억제되었고 탁도 증가율 및 미생물 증가도 억제되었다. 저온$(5^{\circ}C)$에서 저장시 침지액의 pH 변화는 매우 낮게 나타났으나 고온(15, $25^{\circ}C$)에서 저장시 pH는 초기 급격히 감소하였으나, 24시간 후 다시 증가함을 나타내었다. 또한 $5^{\circ}C$에서 저장시 침지액의 탁도변화는 매우 억제됨을 알 수 있었다. 조직 변화를 나타내는 초기 응력변화$({\sigma}_{/0})$, 탄성성분(E), 점성성분$({\eta})$과 파손강도 등은 침지액의 농도에 상관없이 거의 일정하게 나타났으며, 저장온도에 따라 급격히 조직 변화가 일어났다. 관능시험결과 단단함과 짠맛에 대해서만 시료간에 유의차를 나타냈고, 소금을 침지액에 첨가시 $1{\sim}5%$까지는 짠맛에 대한 시료간에 유의차를 나타내지 않았다.

  • PDF

실트질 모래가 충진된 지오튜브 구조체의 저 등방조건에서 삼축압축시험에 의한 응력-변위 거동 연구 (A Study on Stress-Strain Behaviour of Geotube Structure Filled with Silty Sand Under Low Confining Pressure by Triaxial Compression Test)

  • 김형주;박태웅;김기홍
    • 한국지반신소재학회논문집
    • /
    • 제21권4호
    • /
    • pp.69-78
    • /
    • 2022
  • 지오튜브 공법은 해안지역 해안선 침식방지와 준설토 매립 호안사면의 뒤채움 필터석 대체용으로도 널리 활용되고 있다. 본 연구는 지오텍스타일에 의해 보강되어 제작된 공시체를 현장 상태를 고려하여 등방 구속압력 10kPa, 50kPa, 100kPa 이하로 최소화하여 연직응력 재하 시 변형 거동을 파악하였다. 시험결과 공시체의 연직 변형율 7%까지는 구속압(≤100kPa)에 관계없이 지오텍스타일 조직의 이완에 따른 인장력이 발휘되는 초기 Strain Hardening 영향으로 응력-변위 거동은 동일하였다. 변형율 7%이상부터는 구속압력이 작은 공시체는 재하 시 변형이 커서 보강 지오텍스타일의 인장 저항력을 증가시키므로 Strain Hardening에 의해 파괴 시 축차응력은 상대적으로 증가하였다. 파괴 후는 급격하게 Strain Softening에 의해 취성파괴형태를 나타내면서 저하되었다. 이는 일반적인 삼축압축시험에서 셀 압이 증가되면서 전단응력도 크게 증가되는 현상과 다르다. 지오텍스타일 등방구속시험에서는 지오텍스타일의 인장변위가 일차적으로 영향을 받기 때문에 탄성계수를 급격하게 증가시키는 탄성 거동을 나타내고 있다.

PIV System for the Flow Pattern Anaysis of Artificial Organs ; Applied to the In Vitro Test of Artificial Heart Valves

  • Lee, Dong-Hyeok;Seh, Soo-Won;An, Hyuk;Min, Byoung-Goo
    • 대한의용생체공학회:의공학회지
    • /
    • 제15권4호
    • /
    • pp.489-497
    • /
    • 1994
  • The most serious problems related to the cardiovascular prothesis are thrombosis and hemolysis. It is known that the flow pattern of cardiovascular prostheses is highly correlated with thrombosis and hemolysis. Laser Doppler Anemometry (LDA) is a usual method to get flow pattern, which is difficult to operate and has narrow measure region. Particle Image Velocimetry (PIV) can solve these problems. Because the flow speed of valve is too high to catch particles by CCD camera, high-speed camera (Hyspeed : Holland-Photonics) was used. The estimated maximum flow speed was 5m/sec and maximum trackable length is 0.5 cm, so the shutter speed was determined as 1000 frames per sec. Several image processing techniques (blurring, segmentation, morphology, etc) were used for the preprocessing. Particle tracking algorithm and 2-D interpolation technique which were necessary in making gridrized velocity pronto, were applied to this PIV program. By using Single-Pulse Multi-Frame particle tracking algorithm, some problems of PIV can be solved. To eliminate particles which penetrate the sheeted plane and to determine the direction of particle paths are these solving methods. 1-D relaxation fomula is modified to interpolate 2-D field. Parachute artificial heart valve which was developed by Seoul National University and Bjork-Shiely valve was testified. For each valve, different flow pattern, velocity profile, wall shear stress and mean velocity were obtained.

  • PDF

상호교류분석으로 본 간호학생의 자아상태와 스트레스 대처방법 및 건강상태에 관한 연구 (Study on Ego states in the view of Transactional analysis, Coping style and Health states of Nursing Students)

  • 원정숙;김정화
    • 동서간호학연구지
    • /
    • 제7권1호
    • /
    • pp.68-81
    • /
    • 2002
  • The purpose of this study is to analyze the type of ego states and stress coping style on female college students who are in the course of nursing study. This study is performed in the view of Transactional Analysis and designed to scrutinize descriptive correlations between the type of ego states and stress coping style. The subject is consists of 144 freshmen and sophomore, 138 junior and senior students group, who are students of K nursing college located in Seoul. The sampling investigation period is on Sept. 14, 2002 to Oct. 26, 2002. The measuring instrument used for Transactional Analysis ego state is 50 items Ego-gram research paper devised by Dusay(1997). For studying coping style, Folkman & Lazarus's measurement(1984) was adopted, which is translated and modified by Han, and Oh,(1990). Health states is adopted by standardized health inspecting instrumental table (Cornell Medical Index:CMI) which is designed for Korean people by Ko and Park(1980) Statistic average and standard deviation were generated by using SPSS PC+, t=test and Pearson correlation. The results were as follows: 1) In the type of ego states on both groups indicated the arithmetic apex NP(maximum value), then the point A was high and the data made a down slope to point AC. In the comparison to type of ego states between two groups, only at point CP, the data value of upper year students represented higher than that of lower year ones by c(t=2.28, p=.023). 2) Stress coping style of whole students were highly and affirmatively dedicated to research. Especially hopeful aspect(t=.67, p=.05), relaxation of tension(t=-2.16, p=.03) made significant difference each other in the view of arithmetic calculation. 3) In view of nursing students' physical health states, there is significant difference in past history(t=2.50, p=.013) and in case of mental health states, there are considerable discrepancies between lower group(73.52) and upper group(75.11)(p<.05). In view of all field, state of tension(t=2.13, p=.048) has difference. 4) While verifying coping style in terms of ego states level between lower and upper students group, In type CP, high level ego states group indicated significant difference on stress coping style area than low leveled group and made such sequences as the central point of problem, In type NP, sequences such as the central point of problem, In type A, the central point of problem, In type FC, hopeful aspect and In type AC, hopeful aspect and indifference were derived significantly different (p<.05). 5) While verifying health state differences in the level of lower and upper ego states, In type FC, low level group(150.29) marked higher point than upper group(145.19), there is remarkable discrepancy and so did whole health state(p=.014), In type AC both mental state(p=.000) and whole health state (p=.015) showed differences. 6) When analyzing correlations between whole students' ego states, copying style and health state, all type of ego state showed differences(p<.001). In correlations between ego state and health state, in type FC physical state had an apex and there are inverse correlations among the other types. Especially, type FC showed inverse correlations with great discrepancies(p<.05). In mental state, type NP(${\gamma}=.198$, p<.001) and type A(${\gamma}=.166$, p<.05) represented straight correlations with remarkable differences. Especially, In type AC showed inverse correlations(${\gamma}=.282$, p<.001). In case of correlations between copying style and health state, indifference(${\gamma}=-.157$) and relaxation of tension(${\gamma}=-.158$) presented great difference(p<.05). In mental state, central point of problem and search for social support showed straight correlations with great discrepancies(p<.05), hopeful aspect and indifference showed inverse correlations with considerable differences(p<.001).

  • PDF

숲치유와 원예치료의 치유효과 분석 (An Analysis of the Healing Effects of Forest Therapy and Horticultural Therapy)

  • 박선아;정문선;이명우
    • 한국조경학회지
    • /
    • 제43권3호
    • /
    • pp.43-51
    • /
    • 2015
  • 삭막한 도시환경으로부터 오는 스트레스는 도시민들에게 다양한 질병을 발생시키거나 건강을 악화시키는 반면, 자연은 인간에게 긍정적인 치유효과를 준다. 자연을 통한 치유프로그램은 활동공간의 특성에 따라 숲치유와 원예치료로 구분할 수 있다. 그러나 치유프로그램에 대한 연구는 독립적으로 이루어져 다양한 프로그램의 적용과 연계에 따른 효과를 파악하는데 한계가 있다. 따라서 본 연구는 숲치유와 원예치료의 생리적 심리적 효과를 비교 분석하여 각 프로그램의 효과와 차이점을 밝혀 향후 치유프로그램 개발과 치유공간 설계의 기초자료를 제공하고자 한다. 실험은 숲치유 5명, 원예치료 5명의 피험자를 대상으로 5일간의 프로그램에 대한 사전사후검사를 실시하였다. 생리적 반응은 혈압, 맥박, 코티솔 변화량으로 측정하였고, 심리적 반응은 기분상태검사로 측정하였다. 분석방법은 통계프로그램 SPSS 18.0 for windows의 분산분석(ANOVA)과 대응표본 T-test를 실시하였다. 연구결과, 1) 숲치유와 원예치료는 생리적, 심리적으로 모두 긍정적 효과를 보이며, 2) 숲치유는 원예치료보다 생리적 이완과 스트레스 감소에 더 효과적이고, 3) 원예치료는 숲치유보다 우울감 감소에 더 효과적인 경향이 있는 것으로 나타났다. 위 결과는 각 치유프로그램의 특징을 파악함으로써, 향후 치유프로그램 개발과 치유공간 설계를 위한 기초자료와 지침 설정에 도움이 될 것으로 기대한다.

열방식 마이크로 임프린트 공정을 위한 고분자 재료의 수치적 모델링과 해석 (Numerical Investigation of Micro Thermal Imprint Process of Glassy Polymer near the Glass Transition Temperature)

  • 란 슈하이;이수훈;이혜진;송정한;성연욱;김무종;이문구
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2009년도 추계학술대회 논문집
    • /
    • pp.45-52
    • /
    • 2009
  • The research on miniature devices based on non-silicon materials, in particular polymeric materials has been attracting more and more attention in the research field of the micro/nano fabrication in recent years. Lost of applications and many literatures have been reported. However, the study on the micro thermal imprint process of glassy polymer is still not systematic and inadequate. The aim of this research I to obtain a numerical material model for an amorphous glassy polymer, polycarbonate (PC), which can be used in finite element analysis (FEA) of the micro thermal imprint process near the glass transition temperature (Tg). An understanding of the deformation behavior of the PC specimens was acquired by performing tensile stress relaxation tests. The viscoelastic material model based on generalized Maxwell model was introduced for the material near Tg to establish the FE model based on the commercial FEA code ABAQUS/Standard with a suitable set of parameters obtained for this material model form the test data. As a result, the feasibility of the established viscoelastic model for PC near Tg was confirmed and this material model can be used in FE analysis for the prediction and improvement of the micro thermal imprint process for pattern replication.

  • PDF

New Generation of Lead Free Paste Development

  • Albrecht Hans Juergen;Trodler K. G.
    • 한국마이크로전자및패키징학회:학술대회논문집
    • /
    • 한국마이크로전자및패키징학회 2004년도 ISMP Pb-free solders and the PCB technologies related to Pb-free solders
    • /
    • pp.233-241
    • /
    • 2004
  • A new alloy definition will be presented concerning increasing demands for the board level reliability of miniaturized interconnections. The damage mechanism for LFBGA components on different board finishes is not quite understood. Further demands from mobile phones are the drop test, characterizing interface performance of different package constructions in relation to decreased pad constructions and therefore interfaces. The paper discusses the characterization of interfaces based on SnPb, SnPbXYZ, SnAgCu and SnAgCuInNd ball materials and SnAgCuInNd as solder paste, the stability after accelerated tests and the description of modified interfaces strictly related to the assembly conditions, dissolution behavior of finishes on board side and the influence of intermetallic formation. The type of intermetallic as well as the quantity of intermetallics are observed, primaliry the hardness, E modules describing the ability of strain/stress compensation. First results of board level reliability are presented after TCT-40/+150. Improvement steps from the ball formulation will be discussed in conjunction to the implementation of lead free materials In order to optimize ball materials for area array devices accelareted aging conditions like TCTs were used to analyze the board level reliability of different ball materials for BGA, LFBGA, CSP, Flip Chip. The paper outlines lead-free ball analysis in comparison to conventional solder balls for BGA and chip size packages. The important points of interest are the description of processability related to existing ball attach procedures, requirements of interconnection properties and the knowledge gained the board level reliability. Both are the primary acceptance criteria for implementation. Knowledge about melting characteristic, surface tension depend on temperature and organic vehicles, wetting behavior, electrical conductivity, thermal conductivity, specific heat, mechanical strength, creep and relaxation properties, interactions to preferred finishes (minor impurities), intermetallic growth, content of IMC, brittleness depend on solved elements/IMC, fatigue resistance, damage mechanism, affinity against oxygen, reduction potential, decontamination efforts, endo-/exothermic reactions, diffusion properties related to finishes or bare materials, isothermal fatigue, thermo-cyclic fatigue, corrosion properties, lifetime prediction based on board level results, compatibility with rework/repair solders, rework temperatures of modified solders (Impurities, change in the melting point or range), compatibility to components and laminates.

  • PDF

New Generation of Lead Free Solder Spheres 'Landal - Seal'

  • Walter H.;Trodler K. G.
    • 한국마이크로전자및패키징학회:학술대회논문집
    • /
    • 한국마이크로전자및패키징학회 2004년도 ISMP Pb-free solders and the PCB technologies related to Pb-free solders
    • /
    • pp.211-219
    • /
    • 2004
  • A new alloy definition will be presented concerning increasing demands for the board level reliability of miniaturized interconnections. The damage mechanism for LFBGA components on different board finishes is not quite understood. Further demands from mobile phones are the drop test, characterizing interface performance of different package constructions in relation to decreased pad constructions and therefore interfaces. The paper discusses the characterization of interfaces based on SnPb, SnPbXYZ, SnAgCu and SnAgCuInNd ball materials and SnAgCuInNd as solder paste, the stability after accelerated tests and the description of modified interfaces stric시y related to the assembly conditions, dissolution behavior of finishes on board side and the influence of intermetallic formation. The type of intermetallic as well as the quantity of intermetallics are observed, primaliry the hardness, E modules describing the ability of strain/stress compensation. First results of board level reliability are presented after TCT-40/+150. Improvement steps from the ball formulation will be discussed in conjunction to the implementation of lead free materials. In order to optimize ball materials for area array devices accelareted aging conditions like TCTs were used to analyze the board level reliability of different ball materials for BGA, LFBGA, CSP, Flip Chip. The paper outlines lead-free ball analysis in comparison to conventional solder balls for BGA and chip size packages. The important points of interest are the description of processability related to existing ball attach procedures, requirements of interconnection properties and the knowledge gained the board level reliability. Both are the primary acceptance criteria for implementation. Knowledge about melting characteristic, surface tension depend on temperature and organic vehicles, wetting behavior, electrical conductivity, thermal conductivity, specific heat, mechanical strength, creep and relaxation properties, interactions to preferred finishes (minor impurities), intermetallic growth, content of IMC, brittleness depend on solved elements/IMC, fatigue resistance, damage mechanism, affinity against oxygen, reduction potential, decontamination efforts, endo-/exothermic reactions, diffusion properties related to finishes or bare materials, isothermal fatigue, thermo-cyclic fatigue, corrosion properties, lifetime prediction based on board level results, compatibility with rework/repair solders, rework temperatures of modified solders (Impurities, change in the melting point or range), compatibility to components and laminates.

  • PDF

$k-{\varepsilon}-{\overline{v^{'2}}}$난류 모델을 이용한 충돌 제트의 유동 및 열전달 특성에 관한 수치해석적 연구 (Numerical Simulation of Flow and Heat Transfer Characteristics of Impinging Jet Using $k-{\varepsilon}-{\overline{v^{'2}}}$ Model)

  • 최범호;이정희;최영기
    • 대한기계학회논문집B
    • /
    • 제24권2호
    • /
    • pp.204-213
    • /
    • 2000
  • This study deals with jet impingement, which is extensively used in the process industries to achieve intense heating, cooling or drying rates and also widely employed as a test flow for turbulent models due to its complex flow configuration, on a flat plate by numerical methods. In this calculation, the finite volume method was employed to solve the Navier-stokes equation based on the non-orthogonal coordinate with non-staggered variable arrangement. To get a better understanding for the fluid flow and heat transfer characteristics of the turbulent jet impingements, $k-{\varepsilon}-{\overline{v^{'2}}}$ turbulent model was adapted and compared with the experimental data and the result of standard $k-{\varepsilon}$ turbulent model. Numerical calculations were carried out with various flow rates, nozzle to plate distances. In the case of the axisymmetric jet impingement on a flat plate, $k-{\varepsilon}-{\overline{v^{'2}}}$ turbulent model showed better agreement with the experimental data than the standard $k-{\varepsilon}$ turbulent model in the prediction of the mean velocity profiles, the turbulent velocity profiles. the turbulent shear stress and the heat transfer rate. The highest heat transfer rate can be obtained when the impingement occurs within the potential core..

보건소 방문보건사업 효과와 간호중재 분석 (Analysis of the Effects and Nursing Intervention of Home Health Care in Public Health Centers)

  • 진영란;장현숙;이인숙
    • 지역사회간호학회지
    • /
    • 제15권3호
    • /
    • pp.353-364
    • /
    • 2004
  • Purpose: The purpose of this study was to investigate the types and frequencies of nursing intervention of home health care in Public Health Centers and its effects. Method: The data collection period for this study lasted from March 1 to December 31, 2003. The clients were sampled by a stratified randomized method among those who had been cared for at least 3 months. The data was analyzed by SPSS for description. ANOVA, paired t test, etc. Result: The types and frequencies of nursing intervention in major chronic health problems were significantly different. The main types of nursing intervention in hypertension and DM patients included education on disease management, regular exercise, stress management, diets, etc. CVA patients were intervened in pain control (ice or hot pack, massage), position changes, and ROM exercise. Cancer patients received imaginary or relaxation therapy, pain control (ice or hot pack, massage), hospice, etc. After the intervention, the drug compliance of hypertension (8.2 days per month) and DM patients (6.2 days per month) improved. Blood sugar levels (FBS 7.6, post partum 2hrs $21.4(mg/d{\ell})$ and blood pressure(systolic 9.8, diastolic 4.3 mmHg) lowered significantly. All aspects of QOL also improved (total 3.68). Conclusion: The types and frequencies of nursing intervention were determined by characteristics of the health problems, and home health care nursing intervention in Public Health Centers was effective to the elderly of the community in many aspects.

  • PDF