• Journal of the Korean Society of Safety
• /
• v.9 no.4
• /
• pp.29-41
• /
• 1994

High temperature tensiles tests, steady state creep tests, internal stress tests and creep rupture tests using Al 7075 alloy were performed over the temperature range of 9$0^{\circ}C$~50$0^{\circ}C$ and stress range of 0.64~17.2(kgf/$\textrm{mm}^2$) in order to investigate the creep behavior and predict creep rupture life From the apparent activation energy Qc and the applied stress exponent n measured, at the temperature range of 9$0^{\circ}C$~l2$0^{\circ}C$, the creep deformation seemed to be controlled by cross slip. On the other hand at the temperature of 20$0^{\circ}C$~23$0^{\circ}C$ the creep deformation seemed to be controlled by dislocation climb but at 47$0^{\circ}C$~50$0^{\circ}C$, by diffusion creep. And the rupture life(t$_{f}$) might be represented by anthermal process attributed to the difference of the applied stress dependence of Internal stress and the ratio of the Internal stress to the applied stress, the thermal activated process attributied to the temperature dependence of the internal stress. Also the ratio between stress dependence of primary creep rate and that of minimum creep rate was measured 0.46, the minimum creep rate is expected to be appromately obtained from master creep curve including the relationship primary creep rate and minumum creep rate. Finally the relationship new rupture parameter and logarithmic stress was represented with including the ratio between the dependence of primary creep rate and that of minimum creep rate, using the new rupture parameter the rupture life predition is exactly expected.d.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.593-603
• /
• 2020

This study identified the relationship between academic stress and hopelessness among female high school students. The self-administered questionnaires were given to 334 female high school students located in D-city during the period from August 20, 2018 to September 20, 2018. As a result, the distribution of the level of hopelessness among those surveyed was 61.6% for the normal range group, 23.1% for the mild range group, 12.9% for the moderate range group, and 2.4% for the severe range group. The level of hopelessness, according to the academic stress of the study subjects, was significantly higher in the higher academic stress group than that in the lower academic stress group (p=0.000). Hopelessness also showed significant positive correlation with academic stress (r=0.371, p<0.01). The results of the logistic regression analysis showed that the risk ratio of hopelessness was significantly increased 9.27 times in the higher academic stress group when compared to that in the lower academic stress group. According to the multiple regression analysis, the significant variables affecting hopelessness were satisfaction with school life, conversation with parents, eating regularly, stress due to tests, stress due to studies and stress about career paths. Given the above results, the hopelessness of female high school students is significantly related to academic stress. Therefore, it is necessary to develop and implement programs that can properly control academic stress factors.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.7
• /
• pp.2159-2166
• /
• 1996

The stochastic properties of variation in fatigue crack growth are important in reliability and stability of structures. In this study,the stochastic model for the variation of fatigue crack growth rate was proposed in consideration of nonhomogeneity of materials. For this model, experiments were ocnducted on 7075-T6 aluminum alloy under the constant stress intensity factor range. The variation of fatigue crack growth rate was expressed by random variables Z and r based on the variation of material coefficients C and m in the paris-Erodogan's equation. The distribution of fatigue life with respect to the stress intensity factor range was evaluated by the stochastic Markov chain model based on the Paris-Erdogan's equation. The merit of proposed model is that only a small number of test are required to determine this this function, and fatigue crack growth life is easily predicted at the given stress intensity factor range.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.2
• /
• pp.243-252
• /
• 1987

The propagation and closure behavior of surface crack initiated at a sharply notched specimens were investigated in 5083-H113 aluminium alloy under constant amplitude of tension load by the unloading elastic compliance method. The crack shape (aspect ratio) was found to be approximately semicircular during the crack was being small and to be changed to semi-elliptical during it was being long. The propagation rate of a surface crack initiated from notch root decelerated with increasing crack length when the crack was small and then accelerated when it was large. The effect of stress ratio was large in lower .DELTA.K range, but the effective stress intensity factor range .DELTA.K$_{eff}$ was found to diminish the difference of the crack propagation rate. By considering the increase in crack closure stress with crack length and examining the microphotographs, plasticity-induced and roughness-induced crack closure mechanisms were predominant in the range of this study.y.

• 한국기계연구소 소보
• /
• s.19
• /
• pp.53-60
• /
• 1989

Hot upsetting experiments were carried out on presintered steel powder preforms in the temperature range 700- $950^{\circ}C$ to examine the hot deformation behavior. Following conclusions were drawn on the basis of the present study. -The flow stress during hot deformation is directly related to $\alpha$- $\gamma$ phase trasformation - The flow stress of ferrite is lower than that of austenite in the moderate temperature range 800- $900^{\circ}C$ for most alloys used in the present study - Major restoration behavior during hot deformation in the ferrite range is dynamic recovery.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.11
• /
• pp.2287-2296
• /
• 2002

Most cracks in the structure occur under mixed mode loading and those fatigue crack propagation behavior heavily depends on the stress ratio. So, it is necessary to study the fatigue behavior under mixed mode loading as the stress ratio changes. In this paper, the fatigue crack propagation behavior was respectively investigated at stress ratio 0.1, 0.3, 0.5, 0.7 and we changed the loading application angle into 0$^{\circ}$, 30$^{\circ}$, 60$^{\circ}$ to apply various loading mode. The mode I and II stress intensity factor of CTS specimen used in this study was calculated by the displacement extrapolation method using FEM (ABAQUS). Using both the experiment and FEM analysis, we have concluded the relationship between crack propagation rate and stress intensity factor range at each loading mode due to the variation of stress ratio. Also, when the crack propagated under given stress ratio and loading mode condition, we have concluded the dominant factors of the crack propagation rate at each case.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.286-291
• /
• 2001

Most cracks in the structure occur under mixed mode loadings and those propagation depend on the stress ratio very much. So, it is necessary to study the fatigue behavior under mixed mode loading as stress ratio changes. In this paper, fatigue crack propagation behavior was investigated respectively at stress ratio 0.1, 0.3, 0.5, 0.7 and we change loading application angle to $0^{\circ},\;30^{\circ},\;60^{\circ}$ to apply various loading. mode. The mode I and II stress intensity factors of CTS specimen used in this study were calculated by displacement extrapolation method using FEM(ABAQUS). Using both the study through the experiment and the theoretical study through FEM analysis, we studied the relation between crack propagation rate and stress intensity factor range at each loading mode due to the variation of stress ratio. Also, when the crack propagated under given stress condition and given loading mode condition, we studied what the dominant factors of the crack propagation rate were at each case.

• Perspectives in Nursing Science
• /
• v.16 no.2
• /
• pp.65-74
• /
• 2019

Purpose: This study applied the Korean Mindfulness-Based Stress Reduction (K-MBSR) program for mothers of children and adolescents with mental illnesses, and verified its effectiveness on perceived stress and depression based on the Middle-range theory of caregiver stress. Methods: A quasi-experimental, non-equivalent control group pre-post test design was used. The K-MBSR program was reconstructed with experts' advice to adjust subjects' characters. Using a group approach, sessions were conducted once a week for six weeks, and each session took 2.5 hours. Results: The experimental group did not show a significant decrease in perceived stress than the control group. However, the experimental group showed a significant decrease in depression than the control group. Conclusion: The K-MBSR program was effective for depression. Future studies on high-stress groups or with an extended program are necessary to clarify the effects of the K-MBSR program on perceived stress. These results are consistent with the middle-range theory of caregiver stress, the theoretical framework of this study. When caregivers have similar inputs, proper intervention can change the control process. Further, it can be assumed that this change positively affects the output.

• Journal of muscle and joint health
• /
• v.19 no.1
• /
• pp.46-56
• /
• 2012

Purpose: This study was to evaluate the effects of rehabilitation training using video game on improvement range of motion for upper -extremity, shoulder pain and stress in stroke patients with hemiplegia. Methods: The study utilized nonequivalent control group non-synchronized design. Participants are sampled from a group of people who are hospitalized in rehabilitation medicine ward at 'K' university hospital in 'S' city from January 1st 2011 to October 31th. Each 28members of control group and experimental group, total 56members were participated. One task is for 10minutes, and the video game for total 30minutes performed 5 times a week, for 3weeks. Data were analyzed by SPSS WIN 17.0. Results: The range of motion for upper-extremity in experimental group was significantly different from that in control group(shoulder flexion t=7.70, $p$ <.001, extension t=7.80, p<.001, abduction t=6.95, $p$ <.001, elbow flexion t=6.47, $p$ <.001). The shoulder pain score in experimental group was significantly different from that in control group(t=-14.58, $p$ <.001). The level of stress in experimental group was significantly different from that in control group(t=-4.89, $p$ <.001). Conclusion: The result proved that rehabilitation training using video game was an effective stroke patients to increase in range of motion for upper-extremity and decrease in the shoulder pain, stress.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.2 s.245
• /
• pp.120-127
• /
• 2006

The fatigue behavior of LIPCA was so sensitive to the manufacturing condition, the environmental factors and the change of the test apparatus. Therefore, we could be considering not only the relationship between the stroke range $({\Delta}h)$ and actuating frequency but also the relationship between the stroke range $({\Delta}h)$ and the total effective moment $(M^E)$. Thus, this study proposed the calculation method of the applying $M^E$ when the $({\Delta}h)$ of LIPCA was increased from 1.mm to 20mm. To estimate the relationship between the total effective moment $(M^E)$ and the Bernoulli-Euler bending moment (M) was reviewed. And the residual stress distribution of LIPCA and THUNDER using the CLT was evaluated. In conclusions, converting the $({\Delta}h)$ of LIPCA to the radius of curvature (p) and calculating the $(M^E)$, it was found that the p by the $M^E$ changed similarly as the $({\Delta}h)$. It was found that the $M^E$ was 2.2 times as the M. While CFRP and PZT of LIPCA, which had the superior compressive characteristic, had the compressive residual stress, GFRP was subject to the tensile residual stress. Since this reversed configuration between the compressive residuals stress and the tensile one was made, the requirement of the stroke range $({\Delta}h)$ increase was satisfied.