• 대한기계학회논문집
• /
• 제10권2호
• /
• pp.208-214
• /
• 1986

본 연구에서는 균열 닫힘에 관한 연구의 일환으로 5083-O 알루미늄합금을 사용하고 소규모강복조건하에서 일정진폭하중피로시험을 시행하여 이 재료의 피로균열 진전속도와 균열닫힘에 관하여 검토하였다.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.145-153
• /
• 1999

This study has been performed to investigate the stress distribution around defects that behave as stress concentrators and fracture mechanical analysis for cracks initiatiating at stress concentrators. The stress distribution was analyzed using Finite Element Method and non dimensional stress intensity factor was determined by the mean stress method. In addition, stress interaction effects around defects and cracks were compared.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.297-302
• /
• 1999

Finite element analysis is peformed about the crack propagation in half-space due to sliding contact. The analysis is based on linear elastic fracture mechanics and stress intensity factor concept. The crack location is fixed and the friction coefficient between asperity and half-space is varied to analyze the effect of surface friction on stress Intensity factor for horizontal crack. The crack propagation direction is predicted based on the maximum range of shear and tensile stress intensity factor.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.381-386
• /
• 1993

This paper describes the dynamic fracture behavior of brittle materials under impact loading by using INSAMCR program with instrumented charpy test machine. To calculate the Dynamic Stress Intensity Factor The finite element analysis methods program, INSAMCR, was used. Dynamic fracture characteristic was researched to verify a relationship between Dynamic Stress Intensity Factor and crack tip propagation velocity in WC-6%Co. The relationship between Dynamic Stress Intensity Factor and crack tip velocity revealed typical .GAMMA. shape. INSAMCR was run to verify experimental results in WC-6%Co and shows a good coincidence.

• 지역사회간호학회지
• /
• 제17권4호
• /
• pp.521-529
• /
• 2006

Purpose: This study was to measure the degree of job stress and job satisfaction and the relationship between job stress and job satisfaction of 119 relief squads. Methods: The subjects were 170 members of 119 relief squads in the Fire Department of D City, and data were collected from 1 April to 20 April, 2006 through a survey using a questionnaire composed of questions on general characteristics (11 items), job stress (6 items) and job satisfaction (20 items). Collected data were analyzed through frequency, percentage, t-test, ANOVA and Pearson's correlation using the SPSS program. Results: The average item score for job stress was 2.77. Role sharing with peers was highest as 3.05. There were significant differences in the degree of job stress according to religion, working period and applying motive. The average item score for job satisfaction was 2.93. Group conflict was highest as 3.18. There were significant difference in the degree of job satisfaction according to religion, working period and applying motive. There were significant differences in the negative correlation between role-sharing with peers among the job stress factors and decision-making factor (r=.53), group conflict factor (r=.58), role implementation factor (r=.63) and personal social-culture factor (r=.53) among the job satisfaction factors. Also, there were significant differences in the negative correlation between co-workers among the job stress factors and decision-making factor (r=.607), group conflict factor (r=.51) and personal social-culture factor (r=.45) among the job satisfaction factors. Conclusion: It is important to develop various methods of job stress management to increase job satisfaction in 119 relief squads.

• Journal of Mechanical Science and Technology
• /
• 제18권5호
• /
• pp.808-813
• /
• 2004

The stress analysis on orthotropic composite cylindrical shells with one circular or one elliptical cutout subjected to an axial force is carried out by using an analytical and experimental method. The composite cylindrical shell governing equation of the Donnell's type is applied to this study and all results are presented by the stress concentration factor. The stress concentration factor is defined as the ratio of the stress on the region around a cutout to the nominal stress of the shell. The stress concentration factor is classified into the circumferential stress concentration factors and the radial stress concentration factors due to the cylindrical coordinate of which the origin is the center of a cutout. The considered loading condition is only axial tension loading condition. In this study, thus, the maximum stress is induced on perpendicular region against axial direction, on the coordinate. Various cutout sizes are expressed using the radius ratio, (equation omitted), which is the radius of a cutout over one of the cylindrical shell. Experimental results are obtained using strain gages, which are attached around a cutout of the cylindrical shell. As the result from this study, the stress concentration around a cutout can be predicted by using the analytical method for an orthotropic composite cylindrical shell having a circular or an elliptical cutout.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.447-456
• /
• 1997

Stress intensity factor of semi-infinite parallel crack propagation with constant velocity in dissimilar orthotropic strip under out-of-plane clamped desplacement is investigated. Using Fourier integral transforms the boundary value problem is derived by a pair of dual integral equation and finally reduced to a single Wiener-Hopf equation. By applying Wiener-Hopf technique the equation is solved. Applying this result the asymptotic stress fields near the crack tip are determined, from which the stress intensity factor is obtained in closed form. The more the ratio of anisotropy or the ratio of bi-material shear modulus increase in the main material including the crack, the more the stress intensity factor increases. Discontinuity in the stress intensity factor is found as the parallel crack approaches the interface. In special case, the results of isotropic materials agree well with those by the previous researchers.

• 한국실내디자인학회논문집
• /
• 제25권5호
• /
• pp.148-156
• /
• 2016

This study proposes the structural model of inpatient's satisfaction with their room. Relationship among patients' privacy, patients' stress, and patients' satisfaction were evaluated and were discussed. Survey research followed the literature review, in which the subjects answered questions of the 12 items for the patients' privacy requirements, 10 items selected from the HSRS, and an item of patients' satisfaction. A total of 120 copies were analyzed through the statistical process using the SPSS Win Program 20.0 and SEM by the AMOS 20.0. Results and conclusions are as follows: (1) the inpatients' privacy requirements was subdivided into 'the reserve factor', 'the territoriality factor', and 'the solitude factor'. (2) The inpatients' stress level was subdivided into 'the relationship factor', 'the unfamiliarity factor', and 'the control factor'. (3) The model of relationship among the subjects' privacy requirements, stress level and their satisfaction with the patients' room showed that the subjects' stress level affected their satisfaction with the patients' room directly and the subjects' privacy requirements gave an direct and indirect effect on their' stress level and an indirect effect on their satisfaction with patients' room.

• 산업기술연구
• /
• 제20권A호
• /
• pp.169-178
• /
• 2000

The 4-point bending tests have been performed In order to estimate the effect of TIG-dressing on fatigue strength and fatigue characteristics quantitatively for non load-carrying fillet welded joints subjected to pure bending. As a result of fatigue tests, fatigue strengths of as-welded specimens have satisfied the grade of fatigue strength prescribed in specifications of korea, AASHTO and JSSC. Fatigue strength at 2 million cycles of TIG-dressing specimens have increased compared with as-welded specimens. As the result of beachmark tests, fatigue cracks occurred at several points, where the radius of curvature and flank angle in the weld bead toes were low, and grew as semi-elliptical cracks, then approached to fracture. As a result of finite element analysis, stress concentration factor in weld bead toes has closely related to the flank angle and radius of curvature, and between these, the radius of curvature has more largely affected in stress concentration factor than flank angle. As a result of fracture mechanics approaches, the crack correction factor of test specimens has largely affected on stress gradient correction factor in case a/t is below 0.4. From the relations between stress intensity factor range estimated from FEM analysis and fatigue crack growth rate, fatigue life has been correctly calculated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.165-169
• /
• 2000

A simple method was suggested to calculate the stress intensity factor for a one-sided patched crack with finite thickness. To consider out-of-plane bending effect resulting from the load-path eccentricity, the spring constant as a function of the through-thickness coordinate z was calculated from the stress distribution in the un-cracked plate, ${\sigma}_{yy}(y=0,\;z)$, and the displacement for the representative single strip Joint, $u_y(y=0,\;z)$. The stress Intensity factors were obtained using Rose's asymptotic solution approach and compared with the finite element results. In short crack region, two results had a little difference. However, two results were almost same in long crack region. On the other hand, the stress intensity factor using plane stress assumption was more similar to finite element result than plane strain condition.