• 제목/요약/키워드: Stress Cycle Analysis

검색결과 394건 처리시간 0.028초

롤러 분쇄기용 테이블 라이너의 파손 해석에 관한 연구 (A Study on on Failure Analysis of Table Liner for Roller Mill)

  • 이동우;홍순혁;이경영;조석수;주원식
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 춘계학술대회
    • /
    • pp.163-169
    • /
    • 2003
  • The vertical roller mill is the important machine grinding and mixing various crude materials in the manufacturing process of portland cement. Table liner is one of grinding elements of vertical roller mill and is subjected to the cyclic bending stress by rollers load and the centrifugal force by rotation of table. It demands $4{\times}10^7$ cycle but has $4{\times}10^6{\sim}8{\times}10^6$ cycle. It fractures at the edge of grinding path of outside roller. The repair expense for it amounts to 30% of total maintenance of vertical roller mill. Therefore, this study shows the fracture mechanism of table liner for vertical roller mill using HDM and fatigue analysis

  • PDF

시뮬레이션 해석을 통한 형상 별 타이로드 엔드 모델의 융합 기술 연구 (Convergence Technique Study of Model Tie Rod End by Configuration through Simulation Analysis)

  • 이정호;조재웅
    • 한국융합학회논문지
    • /
    • 제7권1호
    • /
    • pp.161-166
    • /
    • 2016
  • 본 연구에서는 타이로드 엔드의 형상에 따른 변형량과 응력, 피로 수명을 연구하였으며, 총 세 가지 형상을 가진 타이로드 엔드들을 CATIA 프로그램으로 3차원으로 모델링 한 뒤, ANSYS 유한요소해석 프로그램으로 시뮬레이션 해석을 수행하였다. 타이로드 엔드 모델의 형상별로는 모델 A, B 및 C가 있다. 본 연구 결과로서는 모델 A형의 최대 변형량, 최대 등가 응력 및 최대 피로수명들은 각각 0.0614mm, 160.27MPa 및 336,930cycle로 나타났으며, 모델 B형의 최대 변형량, 최대 등가 응력 및 최대 피로수명들은 각각 0.0648mm, 90.889MPa 및 1,171,000cycle로 나타났다. 또한 모델 C형의 최대 변형량, 최대 등가 응력 및 최대 피로수명들은 각각 0.0402mm, 84.794MPa 및 20,000,000cycle로 나타났다. 이러한 결과 값들을 통하여 형상에 따른 타이로드 엔드 모델들의 내구성을 예측할 수 있었고, 보다 진보된 타이로드 엔드의 설계 및 개발을 위한 데이터를 확보할 수 있었다. 또한 디자인 면에서 융합 기술로의 접목도 가능하여 미적인 감각물로 나타낼 수 있다.

Analysis of Genes Regulated by HSP90 Inhibitor Geldanamycin in Neurons

  • ;;권오유
    • 대한의생명과학회지
    • /
    • 제15권1호
    • /
    • pp.97-99
    • /
    • 2009
  • Geldanamycin is a benzoquinone ansamycin antibiotic that binds to cytosol HSP90 (Heat Shock Protein 90) and changes its biological function. HSP90 is involved in the intracellular important roles for the regulation of the cell cycle, cell growth, cell survival, apoptosis, angiogenesis and oncogenesis. To identify genes expressed during geldanamycin treatment against neurons of rats (PC12 cells), DNA microarray method was used. We have isolated 2 gene groups (up-or down-regulated genes) which are geldanamycin differentially expressed in neurons. Granzyme B is the gene most significantly increased among 204 up-regulated genes (more than 2 fold over-expression) and Chemokine (C-C motif) ligand 20 is the gene most dramatically decreased among 491 down-regulated genes (more than 2 fold down-expression). The gene increased expression of Cxc110, Cyp11a1, Gadd45a, Gja1, Gpx2, Ifua4, Inpp5e, Sox4, and Stip1 are involved stress-response gene, and Cryab, Dnaja1, Hspa1a, Hspa8, Hspca, Hspcb, Hspd1, Hspd1, and Hsph1 are strongly associated with protein folding. Cell cycle associated genes (Bc13, Brca2, Ccnf, Cdk2, Ddit3, Dusp6, E2f1, Illa, and Junb) and inflammatory response associated genes (Cc12, Cc120, Cxc12, Il23a, Nos2, Nppb, Tgfb1, Tlr2, and Tnt) are down-regulated more than 2 times by geldanamycin treatment. We found that geldanamycin is related to expression of many genes associated with stress response, protein folding, cell cycle, and inflammation by DNA microarray analysis. Further experimental molecular studies will be needed to figure out the exact biological function of various genes described above and the physiological change of neuronal cells by geldanamycin. The resulting data will give the one of the good clues for understanding of geldanamycin under molecular level in the neurons.

  • PDF

MCF-7 세포주의 γ선에 의한 DNA 손상 반응 유전자 발현 양상의 분석 (A DNA-Damage Response Gene Expression Analysis in MCF-7 followed by γ-Radiation)

  • 박지윤;황창일;박웅양;김진규;채영규
    • 환경생물
    • /
    • 제23권1호
    • /
    • pp.21-26
    • /
    • 2005
  • Cell response to genotoxic agents is complex and involves the participation of different classes of genes including cell cycle control, DNA repair and apoptosis. In this report, we presented a approach to characterize the cellular functions associated with the altered transcript profiles of MCF-7 exposed to low-dose in vitro gamma-irradiation. We used the method of human 2.4 k cDNA microarrays containing apoptosis, cell cycle, chromatin, repair, stress and chromosome genes to analyze the differential gene expression characterization that were displayed by radiation-exposed cell, human breast carcinoma MCF-7 cell line, such as 4 Gy 4 hr, 8 Gy 4 hr, and 8 Gy 12 hr. Among these genes, 66 were up-regulated and 49 were down-regulated. Specific genes were concomitantly induced in the results. Cyclin dependent kinase 4 (Cdk4) is induced for starting the cell cycle. This regulation is required for a DNA damage­induced G1 arrest. In addition to, an apoptotic pathways gene Bcl-w was concomitantly induced. Mismatch repair protein homologue-l (hMLH1), a necessary component of DNA mismatch protein repair (MMR), in G2-M cell cycle checkpoint arrest. The present study provides new information on the molecular mechanism underlying the cell response to genotoxic stress, with relevance to basic and clinical research.

압축기 토출벨브의 유체-구조 연계해석 및 충돌해석 (Flow Structure Interaction 3-D Reciprocating Compressor and Impact Analyses of Compressor Discharge Valve)

  • 레사 옥타비안티;김동현;박강균;정원현;안재우;문경호;고영필;김형식
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 춘계학술대회논문집
    • /
    • pp.633-640
    • /
    • 2007
  • In this paper, 3-D reciprocating compressor is taken into flow-structure interaction analysis. The full cycle process consisted of cylinder expansion and compression has been modeled without considering flow leakage through cylinder wall. Fully-coupled FSI analysis of this compressor model was iteratively solved and gives sufficient result with the experimental test. The study is emphasized to thoroughly investigate discharge valve motion, opening and closing, in order to determine discharge valve region which is prone to have high effective stress. The cylinder pressure is successfully validated before conducting impact analyses between discharge valve and other susceptible supported structure. Velocity profile has been obtained in FSI analysis is used as initial condition to carry out further impact analyses. Stress result of discharge valve and valve spring gives preliminary estimation of higher stress area due to its impact phenomena.

  • PDF

DC/DC 스위칭 컨버터 특성 (DC/DC Switching Converter Characteristics)

  • 최영진;김상준;김태경
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1999년도 추계종합학술대회 논문집
    • /
    • pp.743-746
    • /
    • 1999
  • In this paper, Flyback type DC/DC Switching Converter was designed, analyzed and fabricated. Worst Case Analysis(WCA) was peformed with Mathcad program and presents circuit simulation results for the in-rush current limit circuit. The value of the maximum OFF voltage stress is 131.84V, it is less than device specification(200V). The switching frequency(nominal case) and duty cycle at the wont case analysis are 75KHz and 34.62%, respectively. The maximum in-rush current presents 0.5A Those results show a possibility for use in space

  • PDF

반하(半夏)가 스트레스로 인한 생쥐의 뇌조직 유전자변화에 미치는 영향 연구 (Genome Wide Expression Analysis of the Effect of Pinelliae Rhizoma Extract on Psychological Stress)

  • 정종효;조수인;송영길;김하나;김경옥
    • 동의신경정신과학회지
    • /
    • 제26권1호
    • /
    • pp.63-78
    • /
    • 2015
  • Objectives: Pinelliae Rhizoma has traditionally been used as an anti-depressant in oriental medicine. This study is to investigate the effect of Pinelliae Rhizoma extract (PRe) on psychological stress in genome wild expression of mice. Methods: After giving physical stress to mice, PRe was orally administered with 100 mg/kg/day for five days. After extracting whole brain tissue from the mice, their genome changes were observed by micorarray analysis method. The genome changes were analyzed by IMAGENE 4.0, TREEVIEW, FatiGo algorithems, BOND database, cytoscape program, etc. Results: 1. PRe administered group were remained at normal level; 60% of increase was shown in expressed genes by physical stress, and 65% of decrease was shown in expressed genes by psychological stress. 2. Genes with increased expression in control group that remained at a normal state in PRe administered group were involved with the gene of a cellular metabolic process on biological process, protein binding on molecular function, and cell part on cell composition. The pathway was found to be cytokin-cytokin receptor interaction. 3. Genes with decreased expression in control group that remained at a normal state in PRe administered group were involved with the gene of a cellular metabolic process on biologiacl detail and coupled ATPaes activity on molecular function. This gene related path was Ubiquintin mediated proteolysis etc. 4. Core node genes analyzed by protein interaction network were Vinculin, Cell sdivision cycle 42 homolog (S. cerevisiae) etc. They played an important role in maintaining cytoskeleton and controlling cell cycle. Conclusions: Several genes were up-regulated and down-regulated in response to psychological stress. The expression of most of the genes that were altered in response to psychological stress was restored to normal levels in PRe treated mice. When the interaction network information was analyzed, the recovery of the core node genes in PRe treated mice indicates that this final set of genes may be the effective target of PRe.

18Ni 마르에이징강의 피로특성 및 유한요소해석 (Fatigue Characteristics and FEM Analysis of 18Ni(200) Maraging Steel)

  • 장경천;국중민;최병희;정재강;최병기
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 2004년도 춘계학술대회 논문집
    • /
    • pp.136-142
    • /
    • 2004
  • Effects of Nb(Niobium) contents and solution annealing on the strength and fatigue lift of 18%Ni maraging steel commonly using in aircraft, space field, nuclear energy, and vehicle etc. were investigated. Also the fatigue life stress intensity factor were compared experiment result and FEA(finite element analysis) result. The more Nb content, the higher or the lower fatigue lift on base metal specimens or solution annealed specimens showing that the fatigue life was almost the same. The maximum stresses of X, Y, and Z axis direction showed about 2.12${\times}$10$^2$MPa, 4.40${\times}$10$^2$MPa and 1.32${\times}$10$^2$MPa respectively. The Y direction stress showed the highest because of the same direction as the loading direction. The fatigue lives showed about 7% lower FEA result than experiment result showing almost invariable error every analyzed cycle. Stress intensity factor of the FEA result was lower about 3.5∼10% than that of the experiment result showing that the longer fatigue crack length, the higher error. It considered that the cause for the difference was the modeled crack tip having always the same shape and condition regardless of the crack growth.

  • PDF

Nb 함량에 따른 마르에이징강의 유한요소해석에 관한 연구 (A Study on the FEM Analysis of Maraging Steel according to Nb content)

  • 최병기;최병희;권택용
    • 한국안전학회지
    • /
    • 제20권4호
    • /
    • pp.1-8
    • /
    • 2005
  • Effects of Nb(Niobium) contents and solution annealing on the strength and fatigue life of 18%Ni maraging steel commonly using in aircraft, space field, nuclear energy, and vehicle etc. were investigated. Also the fatigue life stress intensity factor were compared experiment result and FEA(finite element analysis) result. The more Nb content, the higher or the lower fatigue life on base metal specimens or solution annealed specimens showing that the fatigue lift was almost the same. The maximum stresses of X, Y, and Z axis direction showed about $2.12{\times}10^2MPa,\;4.40{\times}10^2MPa\;and\;1.32{\times}10^2MPa$ respectively. The Y direction stress showed the highest because of the same direction as the loading direction. The fatigue lives showed about 7% lower FEA result than experiment result showing almost invariable error every analyzed cycle. Stress intensity factor of the FEA result was lower about $3.5{\sim}10%$ than that of the experiment result showing that the longer fatigue crack length the higher error. It considered that the cause for the difference was the modeled crack tip having always the same shape and condition regardless of the crack growth.

Analysis and Implementation of a New Single Switch, High Voltage Gain DC-DC Converter with a Wide CCM Operation Range and Reduced Components Voltage Stress

  • Honarjoo, Babak;Madani, Seyed M.;Niroomand, Mehdi;Adib, Ehsan
    • Journal of Power Electronics
    • /
    • 제18권1호
    • /
    • pp.11-22
    • /
    • 2018
  • This paper presents a single switch, high step-up, non-isolated dc-dc converter suitable for renewable energy applications. The proposed converter is composed of a coupled inductor, a passive clamp circuit, a switched capacitor and voltage lift circuits. The passive clamp recovers the leakage inductance energy of the coupled inductor and limits the voltage spike on the switch. The configuration of the passive clamp and switched capacitor circuit increases the voltage gain. A wide continuous conduction mode (CCM) operation range, a low turn ratio for the coupled inductor, low voltage stress on the switch, switch turn on under almost zero current switching (ZCS), low voltage stress on the diodes, leakage inductance energy recovery, high efficiency and a high voltage gain without a large duty cycle are the benefits of this converter. The steady state operation of the converter in the continuous conduction mode (CCM) and discontinuous conduction mode (DCM) is discussed and analyzed. A 200W prototype converter with a 28V input and a 380V output voltage is implemented and tested to verify the theoretical analysis.