• Journal of radiological science and technology
• /
• v.31 no.3
• /
• pp.239-247
• /
• 2008

In order to study the occurrence of symptoms of musculoskeletal disorders of radio-technologists employed at metropolitan general hospitals and the factors that influence such occurrence, standardized questionnaire by NIOSH that was modified and supplemented to be suitable for conditions in Korea was used. Answers collected from 143 radio-technologists in two weeks from June 13, 2007 were analyzed and the results are as follows. Factor that influence symptoms of musculoskeletal disorders by area were analyzed through multiple logistic regression analysis and the results found that in the neck area, risk increased as the burdening work category 2(Korea ministry of labor)(OR=3.94) and burdening work category 9(Korea ministry of labor)(OR=4.72) increased. In the shoulder region, risk increased as burdening work category 2(Korea ministry of labor)(OR=5.36), burdening work category 7(Korea ministry of labor)(OR=3.90), and burdening work category 9 (Korea ministry of labor)(OR=5.76) increased. In the arm/hand/wrist regions, risk increased as burdening work category 2 (Korea ministry of labor) (OR=6.91), and burdening work category 9 (Korea ministry of labor)(OR=3.76) increased. In the lower back region, risk increased as burdening work category 2 (Korea ministry of labor) (OR=3.06), and burdening work category 8 (Korea ministry of labor)(OR=8.14) increased. In the leg/knees/foot regions, risk increased as burdening work category 2 (Korea ministry of labor) (OR=3.63), and burdening work category 9 (Korea ministry of labor)(OR=2.96) increased. Conclusively, in factors that influence musculoskeletal disorder symptoms in radio-technologists, influence of subjective health conditions, total work experience, experience in current division, and burdening work category 2, 7, 8, and 9 (Korea ministry of labor) were most significant. Therefore, for preventive management, in addition to ergonomic and educational intervention for correcting improper posture during work, efforts for break time adjustment and stress reduction is needed, and encouragement and support for regular exercise is needed.

• Journal of radiological science and technology
• /
• v.32 no.4
• /
• pp.381-391
• /
• 2009

Purposes : The purpose of this study was to analyze factors that could affect health of radiological technologists, which is useful for health care and development of programs for health promotion. Methods : Subjects were 234 of radiological technologists who work in general hospitals. Some questionnaires were made about perceptions of health condition and promotional behavior of health for this study. The questionnaires of health perception were 20 items that consist of the present condition of health, health concern and sensitivity. The reliability was sufficient(Cronbach's $\alpha=0.79$). The other questionnaires about health promotion behavior were 47 items that consist of self-realization, health responsibility, exercise, nutrition, personal relationships, and stress management. The results turned out to bewas sufficient (Cronbach's $\alpha=0.93$). Every data was treated statistically, comparison of average(t-test, ANOVA), correlation, and multiple regression. Results : Related factors to health promotion behavior were age, marriage, salary, class of one's position, career, employment, and religion, in general features. In health life habit, related factors were smoke and exercise. Results of health promotion behavior was 2.90 of mean score, 0.37 of standard deviation. Correlations between factors of health perception and health promotion behavior was positive(p<0.01). Health promotion behavior were affected by sensitivity, presents condition of health, exercise, smoke, career. Sensitivity was the most affectable variable, which means that promotional behavior score became higher and higher as the score of sensitivity and present condition were increased. In addition, persons who exercise regularly, had been smoked, and has higher career showed higher score of promotional behavior. Conclusion : Radiological technologists have to keep their health, trying not to infected by a disease. Most of all, no smoking and regular exercise are the most important thing to all of members.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.11 no.2
• /
• pp.179-186
• /
• 2008

Purpose: Feeding problems are common for typically developing children and have negative effects on physical, behavioral, and cognitive development. The purpose of the current study was to examine factors related to childhood feeding problems for typically developing children via parental reports. Methods: The feeding questionnaire developed by the authors and the Childhood Eating Behavior Inventory (CEBI) were administered to 796 parents of children who recruited from 2 pediatric outpatient clinics (n=379) and community (n=417). Problem eaters (PE) were identified by parental report and frequency analysis was conducted for types of feeding problems and its severity, problem behaviors during mealtime, the feeding methods of the parents, and the need for treatment. Results: The CEBI scores were significantly different between the PE and non-problem eaters (NPE), which suggests that the parental reports were reliable. The younger children had more feeding problems than the older children. The most frequent and severe feeding problems were selective eating and longer mealtimes across all age groups. One-half of the children had more than one problem behaviors during mealtime. Most parents of PE used ineffective methods to deal with children's behaviors during meal time, such as cajoling, which was related to their increased level of stress. Many parents reported their children need professional help for the feeding problems. Conclusion: Feeding problems are prevalent among children, especially younger children. Children with feeding problems showed a number of problem behaviors during mealtime and parental coping methods appeared to be ineffective. The need for treatment was considerable, thus the characteristics of this population must be acknowledged for providing proper treatment and advice.

• Korean Journal of Social Welfare
• /
• v.57 no.3
• /
• pp.73-103
• /
• 2005

This study takes of youth panel data(2002-2003), there is the purpose to know to youth employed's labor mobility conditions of employment status conversion and examine on factors affecting conversion of employment status. Main analysis result and policy imply, is as following. First, although youth employed's non-standard employment shows some decrease, employment youth hierarchy was construed that youth of our country is consisting very changefully because appear great turnover that is converted by unemployment or Not economically activity population same period. Specially, non-standard employment phenomenon of woman or low in scholarship person appeared notedly, and because phenomenon that is converted by unemployment or Not economically activity population is expose that is deepened, discriminating policy of government dimension is required for employment stabilization of these class. Second, show result that danger to escape to non-standard job risk trap which seeking employment activity of youth class is arranged case or company which is formed by official path is suitable becomes low, must formulate path of employment about youth class and improve qualitative level of employment through suitable job placement education of youth class or function (technology) level. Third, when was construed, but take into account that the although large enterprise have low risk in non-standard job, recently employment of youth class consists very limited, rather small scale business or smaller enterprise's competitive power preferably need to be plan. Finally, danger to non-standard job youth employed's company form is government connection wonder was expose that high, Such result can do that it is difficult by limited research period, but reflect actuality that youth unemployment policy of our country is enforced laying stress on public labor or unregular job employment such as internship system. Therefore, current youth unemployment policy may have to change by employment policy that can secure stable work record by youth class or act as bridge-building that promote conversion by full-time job.

• Journal of Korean Biological Nursing Science
• /
• v.1 no.1
• /
• pp.100-114
• /
• 1999

This study was done to investigate the effects of rapidly-rotating shift work of two-day interval on fatigue level and the concentration of urinary 17-KS, $Na^+,\;Cl^-$. The subjects were 20 nursing college students(control group) and 15 nurses in a university hospital and the study was done from Apr. 21 to May 4th, 1999. In the test group, each 5 nurses were allocated to day shift(8 AM-4 PM), evening shift(4 PM-12 MN) and night shift(12 MN-8 AM) respectively. The fatigue level were measured 30 minutes after work start on the 2nd day of work shift. Urine specimens were collected at 8 AM, 4 PM and 12 MN on the 2nd day of work shift in the control group and 30 minutes before and after work on the 2nd day of work shift in the test group. The data were analyzed with SPSS(for Window, ver 7.5). Statistical analysis was performed by using t-test, paired t-test and ANOVA. The results were as follows. 1. The perceived fatigue level in shift work 1) The physical and mental fatigue level were significantly higher in night shift than that in day or evening shift(p<0.05). In the neuro-sensory fatigue level, night shift showed higher tendency than that in day or evening shift, but there were no significant differences between each shifts. 2) Comparison between the control group and the test group: Physical fatigue level was significantly higher in night shift than that in day or evening shift of the control group(P<.001). Mental fatigue level was significantly higher in day or night shift than that in evening shift of the control group(P<.05). In the neuro-sensory fatigue level, test group showed higher tendency than that in the control group, but there were no significant differences between two groups. 3) The total fatigue level was higher in night shift than that in day shift or evening shift(P<.05). In comparing with the control group, night shift and day shift showed higher total fatigue level than that in the control group(p<0.05). 2. The concentration of urinary 17-KS, $Na^+$ and $Cl^-$ In the control group, urinary 17-KS, $Na^+$ and $Cl^-$ showed higher level in afternoon that in morning and night. In the test group, cr in day and evening shift and $Na^+$ in evening shift showed higher level at the end of work. The 17-KS concentration at the begining and the end of work in three shift groups were lower than those in control group(p<0.05), however, $Cl^-$ concentration at the begining of work in day shift, and the end of work in day and evening shift were higher than those in control group(p<0.05). $Cl^-$ concentration at the begining and end of work in night shift were considerably higher than those in control group repectively(p<0.1, p<001). $Na^+$ concentration showed a higher tendency in three shift groups except at the begining of work in night shift, but there were no statistical difference. In comparing concentration of the 17-KS, $Na^+$ and $Cl^-$ among the shift groups, 17-KS concentration showed a lower tendency and $Na^+,\;Cl^-$ showed a higher tendency in night shift: The result of this study showes that biorhythm of shift work nurse was irregular. Fatigue level as the subjective index for evaluating the health problem concerning shift work was higher in night shift and proved to be in accordance with the concentration of urinary 17-KS, $Na^+$ and $Cl^-$ used as objective indices. Disturbation of biorhythm and work stress due to night shift seems to cause the health problem of nurses and decrease of work efficiency. It is considered that work regualtion is necessary for the rational management of the nursing administration.

• Journal of Nutrition and Health
• /
• v.48 no.6
• /
• pp.519-529
• /
• 2015

Purpose: The purpose of this study was to examine the prevalence of food insecurity in Korean elderly and to analyze the health status as well as food and nutrient intakes according to food insecurity status. Methods: A total of 939 elderly subjects (over 65 years old) were used in our analysis from the fifth 2010 Korean National Health and Nutrition Examination Survey (KNHANES V-1). The variables consisted of general characteristics, physical and mental health, nutrient intake, rate of deficient intake of energy and nutrients compared with Dietary Reference Intakes for Koreans (KDRIs) and food quality and diversity according to the status of food insecurity. Food insecurity status was measured using a self-reported food security questionnaire on the dietary situation in the previous year, and participants were classified according to three groups: food secure group, mildly food insecure group, and moderately/severely food insecure group. Results: The proportion of the food insecure group was approximately 67% and the food insecure group had lower income and educational status than the food secure group. Food insecurity was associated with worse physical and mental health status after adjusting potentially confounding variables. The results showed that food insecurity in Korean elderly significantly affected mental health (including stress cognition, depression experience, and suicide thoughts) which exceeded stages of physical health. In addition, food insecurity showed significant association with low nutrient intake and high rate of deficient intakes of energy and nutrients compared with KDRIs, and a reduction of dietary quality and diversity was indicated in the food insecure group. Conclusion: This study concludes that the prevalence of food insecurity may affect the physical and mental health as well as dietary intake of the elderly Korean population. Therefore, food insecurity should be considered as an important public health issue in Korea.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.6
• /
• pp.173-179
• /
• 2012

The experiments, which analyze the injury symptoms and diagnose growth conditions utilizing IRVT and analyzing each parts of H. helix L., had been held under a low temperature. Greenhouse and outdoor growing Genus hedera had been prepared and compared with each Genus hedera's peak and bottom leaves' surface temperature under the experimental categories $-6^{\circ}C$ and $-12^{\circ}C$. As results, analyzing the surface thermal property of peak part leaves' of outdoor growing Genus hedera, at experimental categories $-6^{\circ}C$, $-12^{\circ}C$ were ranged from $-2^{\circ}C{\sim}-7^{\circ}C$ and $-2^{\circ}C{\sim}-15^{\circ}C$. On the other hand, the surface thermal property of bottom part leaves at experimental categories $-6^{\circ}C$, $-12^{\circ}C$ were ranged $-2^{\circ}C{\sim}-11^{\circ}C$ and $-1^{\circ}C{\sim}-12^{\circ}C$. It appears that the thermal properties of leaves' surface on $-6^{\circ}C$ peaks and $-12^{\circ}C$ bottoms were more broadband than bottoms and peaks. It means that the peaks were more sensitive than bottoms, as like $-2^{\circ}C{\sim}-15^{\circ}C$, $-1{\sim}-12^{\circ}C$. Moreover, as similar results had seen to leaves surface temperature added to cold wind conditions. How the cold wind damaged the outdoor growing Genus hedera, analyzed the surface thermal property by IRVT data under $0^{\circ}C$, $-2^{\circ}C$, $-4^{\circ}C$ condition, it resulted to $-6.2^{\circ}C$, $-6.8^{\circ}C$, $-7.5^{\circ}C$. It appeared more $3.5{\sim}6.2^{\circ}C$ low temperature than experimental setting point. In addition, each parts thurmal property of peaks and bottoms was not similar, it referred to each parts' sensitivities of low temperature were different on the peak and bottom leaves surface temperature.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.4
• /
• pp.1-13
• /
• 2014

As part of reconsideration on naming of the scenic site No.1 "Myeongju Cheonghak-dong Sogumgang," this study attempts to identify whether there is any mistake with reference to place naming of Korea's No.1 scenic site and if so, to correct the problem by examining the origin of the name and its transition progress through analysis and interpretation of old maps, ancient documents such as traditional geographic books, Yusangi(遊山記) and Letters Carved on the Rocks. The findings of this study are as follows: In traditional geographic books, a term of 'Mt. Cheonghak(靑鶴山)' was first found from "SinjungDonggookyeojisungram(新增東國輿地勝覽)" and after a place name, 'Sogumgang(小金剛)' first appeared in "Yeojidoseo(輿地圖書)" in the middle of the 17th century, it was reproduced in "Jungsuimyeongji(增修臨瀛誌)", which was published in the early 20th century. However, as a result of analyzing old maps, the place name, Sogumgang cannot be found in any local or national map except place names such as Cheonghak-dong, Mt. Cheonghak and Temple Cheonghak. Even though 'Biseonam,' 'Cheonyudong,' 'Gyeongdam' and 'Mt. Cheonghak' appear in Yulgok's "Yucheonghaksangi(遊靑鶴山記)", any part in which 'Sogumgang' was referred is not found. Later, Cheonghak-dong Sogumgang seemed to had been called 'Mt. Cheonghak' or 'Cheonghak-dong(靑鶴洞)' for more than three centuries as seen in Lee Sun-il's "Godamilgo(孤潭逸稿)", Heo Geun's farewell records, Heo Mok's "Cheonghak-dong Guryongyeongi(靑鶴洞九龍淵記)", Yoon Sun-geo(尹宣擧)'s "Padongilgi(巴東日記)" and Lee Won-jo's letters and a poem composed by Gang Jae-hang in the middle of the 18th century is the only record in which the place name, 'Sogumgang' is shown. Meanwhile, 'Sogumgang' carved on Inung Rock(二能巖) in front of Temple Gumgang is presumed to be carved by Inunggyeoone(二能契員) in the 1870s or in 1930s, considering the size of each character, calligraphy, overall layout, wear extent and records in Jiriji. Therefore, no evidence can be found to say that each character of 'Sogumgang' was written by Yulgok because 'Sogumgang' has strong evidences of the origin of its place name. To sum up the findings stated above, since Yulgok's "Yucheonghaksangi", this place seems to have been referred as 'Mt. Cheonghak Cheonghak-dong' and as it is confirmed that the place name, 'Sogumgang' first appeared in "Ohyeongosijo(五言古時調)" of "Ibjaeseonsangyugo(立齋先生遺稿)" and "Yeojidoseo" in the middle of the 18th century, it can be inferred that the place name, Sogumgang had been partly mingled as an another name of Mt. Cheonghak. Therefore, even though it is difficult to say the existing place name has a significant problem, it is thought that it will be better to name 'Mt. Cheonghak Cheonghak-dong' rather than 'Cheonghak-dong Sogumgang' in order to stress on this place's traditional identity as a scenic site related to Yulgok. In addition, as confirmed in this study process, it is said that each character of place names, 'Mt. Cheonghak' and 'Gyeongdam(鏡潭)' and name 'Yoon Sun-geo' carved in Rock Sikdang stated in Yoon Sun-geo's "Padongilgi" in 1964 is a pledge showing the influence of "Yucheonghaksangi" as an ancient travel literature as well as a mark of the Giho school scholars' respect and spirit to honor Yulgok.

• Clinical and Experimental Pediatrics
• /
• v.48 no.2
• /
• pp.143-147
• /
• 2005

Purpose : The aim of the this study was to evaluate the effect of various perinatal conditions on TSH and thyroid hormone levels in cord blood. Methods : Cord blood samples were collected from 130 neonates immediately after birth. TSH, $T_3$, and free $T_4$ levels were measured by the radioimmunoassay(RIA) method. The effects of gestational age, sex, birth weight, delivery method, perinatal asphyxia, maternal diabetes mellitus(DM), and preeclampsia on TSH and thyroid hormone levels were assessed by ANOVA test, Student t-test, and multiple regression analysis. Results : Birth weight and sex did not affect TSH and thyroid hormone levels. TSH level increased according to gestational age(P<0.05). TSH level was $4.42{\pm}0.66{\mu}IU/mL$ in infants born vaginally, which was higher than that of cesarian section delivery($3.31{\pm}0.33{\mu}IU/mL$)(P<0.05). TSH level was $5.18{\pm}0.93{\mu}IU/mL$ in asphyxiated newborns and $2.97{\pm}0.84{\mu}IU/mL$ in non-asphyxiated newborns(P<0.05). TSH level in infants with maternal DM($8.911{\pm}1.25{\mu}IU/mL$) was higher than that of infants without maternal DM($4.32{\pm}0.42{\mu}IU/mL$)(P<0.05). TSH level was $5.28{\pm}0.42{\mu}IU/mL$ in infants with maternal preeclampsia and $3.65{\pm}0.46{\mu}IU/mL$ in infants without maternal preeclampsia(P<0.05). Thyroid hormones were lower in infants with perinatal asphyxia(P<0.05). In asphyxiated infants, $T_3$ level was $75.33{\pm}55.65ng/mL$ and free $T_4$ was $0.54{\pm}0.21ng/mL$. $T_3$ and free $T_4$ level was $109.85{\pm}41.77ng/mL$ and $0.76{\pm}0.22ng/mL$ each in infants without perinatal asphyxia. Among the perinatal factors, gestational age, 1 min Apgar score and maternal DM influenced TSH level independently. Conclusion : In our study, cord blood TSH and thyroid hormone levels were affected by perinatal stress events.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.