• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2001년도 춘계학술발표대회 개요집
• /
• pp.224-227
• /
• 2001

In this study, CT specimens were prepared hem ASTM SA516 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$, -3$0^{\circ}C$, -6$0^{\circ}C$, -8$0^{\circ}C$, -l$0^{\circ}C$ and -l2$0^{\circ}C$ and in the range of stress ratio of 0.1, 0.3 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range $\Delta K_{th}$ in the early stage of fatigue crack growth ( Region I ) and stress intensity factor range $\Delta$K in the stable of fatigue crack growth ( Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da/dN - $\Delta$K in Region II, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate da/dN is rapid in proportion to descend temperature in Region H and the cryogenic-brittleness greatly affect a material with decreasing temperature.

• 비파괴검사학회지
• /
• 제27권2호
• /
• pp.97-104
• /
• 2007

SPPH강의 응력부식 균열과 용접 결함의 AE 신호의 특성을 살펴보았다. 고압배관 용접부의 결함 진전을 유도하기 위하여 부식용액(NaOH)과 국부가열 후 급랭 등의 기법을 적용하여 시험체를 제작하였다. AE 신호분석 결과, 결함으로 의심되는 영역에서 발생되는 AE 신호의 진폭은 $60{\sim}75\;dB$로 나타났으며 누적 진폭 분포 특성 조사에서 용접결함만이 존재하는 시험체는 0.034, 0.034, 0.035의 기울기를 나타내며 부식을 가한 시험체는 용접결함 기구와 부식기구가 합해져 새로운 기울기인 0.040, 0.039, 0.041로 그 차이는 적으나 기울기의 증가가 확인되었다. 가압 3분 이후 각 구간에서 응력부식결함에 의한 AE신호의 검출이 용이하였고 본 실험을 통하여 급작스런 취성파괴를 일으키는 특성을 가지고 있는 응력부식균열(SCC)의 발생 예측과 피해 예방이 가능함을 알 수 있었다.

• 한국해양공학회지
• /
• 제15권3호
• /
• pp.100-106
• /
• 2001

In this study, CT specimens were prepared from Pressure Vessel Steel which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$, -3$0^{\circ}C$, -6$0^{\circ}C$, -10$0^{\circ}C$ and -12$0^{\circ}C$ and in the range of stress ratio of 0.05 and 0.3 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range ${\Delta}K_{th}$ in the early stage of fatigue crack growth (Region I) and stress intensity factor range ${\Delta}K$ in the stable of fatigue crack growth (Region II) was increased in proportion to descent temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da/dN $-{\Delta}K$ in Region II, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It was assumed that the fatigue crack growth rate da/dN in proportion to descending temperature in Region II and the cryogenic-brittleness greatly affect a material with decreasing temperature.

• 한국지반공학회논문집
• /
• 제26권4호
• /
• pp.27-36
• /
• 2010

사질토의 상태정수를 현장시험으로부터 추정하기 위해 실내 챔버에 조성된 부산사에 대해 딜라토미터 시험을 수행하였다. 시험결과, 수평증폭계수($K_D/K_0$)와 상태정수($\Psi$)의 관계는 반대수축상에서 선형관계를 보였으나, 응력이력에 의한 잔류수평응력의 영향으로 과압밀 시료가 정규압밀 시료에 비하여 동일한 상태정수에서 수평증폭계수의 값이 작게 평가되었다. 유효응력으로 정규화된 딜라토미터 계수($E_D/\sigma_m'$)와 상태정수의 관계는 반대수축상에서 선형관계를 만족하였으며, 다소의 분산은 있으나 응력이력에 관계없이 하나의 관계식으로 표현 기능하였다. 다만 응력수준의 영향으로 과압밀 상태보다 정규압밀 상태의 분산이 약간 크게 발생되었으며 구속압이 증가할수록 관계곡선이 하향 이동하는 경향이 나타났다. 기존에 연구된 Ticino sand 및 Toyoura sand와 비교한 결과, $K_D/K_0-\Psi$ 관계는 혼재되어 분포하였으나, $E_D/\sigma_m'-\Psi$ 관계는 시료 압축성의 영향으로 Toyoura sand가 Ticino snad 및 부산사의 상부에 위치하였다.

• Animal Bioscience
• /
• 제34권7호
• /
• pp.1169-1180
• /
• 2021

Objective: This research aimed to study the effects of Artemisia argyi flavonoids (AAF) supplemented in diets on the growth performance and immune function of broiler chickens challenged with lipopolysaccharide (LPS). Methods: A total of one hundred and ninety-two 1-d-old broiler chicks were assigned into 4 treatment groups, which were, respectively, fed a basal diet (control), fed a diet with 750 mg/kg AAF, fed a basal diet, and challenged with LPS, fed a diet with 750 mg/kg AAF, and challenged with LPS. Each treatment had six pens with 8 chicks per pen. On days 14, 16, 18, 20 (stress phase I) and 28, 30, 32, 34 (stress phase II), broilers were injected with LPS (500 ㎍/kg body weight) or an equivalent amount of saline. Results: The results demonstrated that dietary AAF significantly improved the body weight (d 21) and alleviated the decrease of average daily gain in broilers challenged with LPS on d 21 and d 35 (p<0.05). Dietary AAF increased bursa fabricius index, and dramatically attenuated the elevation of spleen index caused by LPS on d 35 (p<0.05). Furthermore, serum interleukin-6 (IL-6) concentration decreased with AAF supplementation on d 21 (p<0.05). Diet treatment and LPS challenge exhibited a significant interaction for the concentration of IL-1β (d 21) and IL-6 (d 35) in serum (p<0.05). Additionally, AAF supplementation mitigated the increase of IL-1β, IL-6 in liver and spleen induced by LPS on d 21 and 35 (p<0.05). This study also showed that AAF supplementation significantly reduced the expression of IL-1β (d 21) and nuclear transcription factor kappa-B p65 (d 21 and 35) in liver (p<0.05), and dietary AAF and LPS treatment exhibited significant interaction for the gene expression of IL-6 (d 21), toll like receptor 4 (d 35) and myeloid differentiation factor 88 (d 35) in spleen (p<0.05). Conclusion: In conclusion, AAF could be used as a potential natural immunomodulator to improve growth performance and alleviate immune stress in broilers challenged with LPS.

• 한국안전학회지
• /
• 제9권4호
• /
• pp.29-41
• /
• 1994

High temperature tensiles tests, steady state creep tests, internal stress tests and creep rupture tests using Al 7075 alloy were performed over the temperature range of 9$0^{\circ}C$~50$0^{\circ}C$ and stress range of 0.64~17.2(kgf/$\textrm{mm}^2$) in order to investigate the creep behavior and predict creep rupture life From the apparent activation energy Qc and the applied stress exponent n measured, at the temperature range of 9$0^{\circ}C$~l2$0^{\circ}C$, the creep deformation seemed to be controlled by cross slip. On the other hand at the temperature of 20$0^{\circ}C$~23$0^{\circ}C$ the creep deformation seemed to be controlled by dislocation climb but at 47$0^{\circ}C$~50$0^{\circ}C$, by diffusion creep. And the rupture life(t$_{f}$) might be represented by anthermal process attributed to the difference of the applied stress dependence of Internal stress and the ratio of the Internal stress to the applied stress, the thermal activated process attributied to the temperature dependence of the internal stress. Also the ratio between stress dependence of primary creep rate and that of minimum creep rate was measured 0.46, the minimum creep rate is expected to be appromately obtained from master creep curve including the relationship primary creep rate and minumum creep rate. Finally the relationship new rupture parameter and logarithmic stress was represented with including the ratio between the dependence of primary creep rate and that of minimum creep rate, using the new rupture parameter the rupture life predition is exactly expected.d.

• 대한수학회지
• /
• 제34권1호
• /
• pp.87-118
• /
• 1997

This paper is concerned with a mixed Lagrangian formulation of the wiscous, stationary, incompressible Navier-Stokes equations $$ (1.1) -\nu\Delta u + (u \cdot \nabla)u + \nabla_p = f in \Omega $$ and $$ (1.2) \nubla \cdot u = 0 in \Omega $$ along with inhomogeneous Dirichlet boundary conditions on a portion of the boundary $$ (1.3) u = ^{0 on \Gamma_0 _{g on \Gamma_g, $$ where $\Omega$ is a bounded open domain in $R^d, d = 2 or 3$, or with a boundary $\Gamma = \partial\Omega$, which is composed of two disjoint parts $\Gamma_0$ and $\Gamma_g$.

• 대한기계학회논문집
• /
• 제16권9호
• /
• pp.1681-1690
• /
• 1992

본 연구에서는 유리섬유강화 플라스틱복합재료를 준비하여 이 재료의 섬유방 향에 따른 파괴인성 및 피로 균열성장거동을 평가하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권8호
• /
• pp.1124-1132
• /
• 2009

A trial was conducted to study the effect of supplemental chromium (Cr) levels from a Cr-yeast source on performance, digestibility and carcass characteristics of transport-stressed lambs. Forty-eight Naemi lambs (avg. BW 31.7 kg) were transported by truck for a distance of 1,450 km. On arrival day, the lambs were randomly allocated to four groups receiving diets supplemented with 0.0, 0.3, 0.6 or 0.9 ppm Cr. Each group consisted of four separately housed replicates of three lambs each. The lambs were fed their respective diets ad libitum for 84 d (21 d stress period, followed by 63 d growing period). Road transit of lambs resulted in a decreased (p<0.001) live body weight of 8.5%. Supplementation of Cr-yeast did not alter the performance of lambs during the stress period. Linear and quadratic increases (p<0.05) were observed in DMI and ADG, respectively, with increasing supplemental Cr levels in the diets during the growing period. Values were greater (p<0.05) by 14.7% and 20.8%, respectively, for lambs fed 0.3 ppm Cr compared to control, while those fed on the other two levels were intermediate. Over the 84-d feeding period, a trend was noted towards a slight increase in loin eye area and a decrease in body wall fat thickness for lambs fed Cr supplementation compared to the control group. This study suggests that the supplementation of Cr-yeast, especially at 0.3 ppm level, is beneficial for improving the performance of growing lambs whether the animals are stressed or not.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.131-131
• /
• 2000

We witnessed the enhancement of mangetoresistance (MR) in La0.75Ca0.25MnO3 thin films grown on Si (100) substrates by RF magnetron sputtering. The films are polycrystalline with (100) and (110) orientations. The lattice constants of films are reduced as much as 0.9% compared to the one of the bulk sample, which proves that the compressive stress on films was imposed by Si sbustrate. It is found that the MR value (Δ$\rho$/$\rho$0) of films are 0.33, 0.29 and 0.27 under a magnetic field of 1.5T for each films with deposition temperature of $700^{\circ}C$, 75$0^{\circ}C$ and 80$0^{\circ}C$, respectively. The correlation between the MR values and lattice constants of films is discussed. It is concluded that the compressive stress on films cause the enhancement of MR values of thin films grown on Si (1000 substrates. Some mechanism of compressive stress induced by Si substrate is suggested.