• Journal of Welding and Joining
• /
• 제21권2호
• /
• pp.97-101
• /
• 2003

The change of microstructures in the base metal during transient liquid phase bonding process of directionally Ni base superalloy, GID-111 was investigated. Bonds were fabricated using a series of holding times(0~7.2ks) at three different temperatures. The flip chip bonding utilizing self-aligning characteristic of solder becomes mandatory to meet tolerances for the optical device. In this paper, a parametric study of aging condition and pad size of samples was evaluated. A TiW/Cu/electroplated Cu UBM structure was selected and the samples were aging treated to analyze the effect of intermetallic compounds with the time variations. An FIB technique was applied to the preparation of samples for TEM observations. An FIB technique is very useful to prepare TEM thin foil specimens from the solder joint interface. After aging treatment, the tendency to decrease in shear strength was measured and the structure of the solder and the UBM was observed by using SEM, TEM and EDS. As a result, the shear strength was decreased of about 21% in the 100${\mu}{\textrm}{m}$ sample at 17$0^{\circ}C$ aging compared with the maximum shear strength of the sample with the same pad size. In the case of the 12$0^{\circ}C$ aging treatment, 18% of decrease in shear strength was measured at the 100${\mu}{\textrm}{m}$ pad size sample. An intermetallic compound of Cu6Sn5 and Cu3Sn were also observed through the TEM measurement by using.

• 한국농촌간호학회지
• /
• 제9권1호
• /
• pp.19-32
• /
• 2014

Purpose: The strudy was done to determine the effect of an exercise program using the muscle strengthening flowchart on flexibility and hand strength and depression of rural elderly women. Methods: For 11 months, from January 9, to November 29, 2013, a survey was done of 37 voluntary participants who were elderly women living in rural areas. This study was a one group pretest-posttest Quasi-experimental research design to identify the effectiveness of self-directed programs. The Korean version of the depression measurement tool (Jo and Kim, 1993) was used. The collected data were analyzed using frequency, descriptive statistics, and paired t-test with SPSS /PC 17.0 program. Results: Comparison of before and after the self-directed program showed that flexibility (p <.001), left grip strength (p <.001), and right grip strength (p <.001) were significantly increased. Depression (p <.001) was significantly reduced. Conclusion: The results of the study show that the exercise program using the muscle strengthening flowchart resulted in of significant muscle strengthening and reduction in depression in rural elderly women. Future use of the muscle strengthening flowchart is recommended to provide long-term operational exercise programs.

• 성인간호학회지
• /
• 제16권1호
• /
• pp.123-134
• /
• 2004

Purpose: The purpose of this study was to examine the effect of use of a horticultural program on the cognitive function, activities of daily living, and hand grip strength of institutionalized dementia patients. Method: Twenty three study participants completed a five week protocol comprised of one week of baseline and four weeks of treatment. The study design was a one group repeated measurement study. For the first and fifth week of the study period, data was collected with 3 instruments: Korean Version of Hasegawa Dementia Scale (HDS-K), Katz's ADL index, hand grip strength. Data analysis was conducted by SPSS version 10.0. Result: Total HDS-K score(p=.000), Activities of daily living(p=.013) and hand grip strength(p=.001) was significantly improved after treatment compared to the baseline. Conclusion: The horticultural program was effective for improving cognitive function, ADL and hand grip strength of the dementia patients. Repeated studies utilizing a control group are needed, using various durations, plants and processes, to confirm these results and to standardize the horticultural program protocol.

• 한국압력기기공학회 논문집
• /
• 제7권4호
• /
• pp.26-30
• /
• 2011

In order to ship low & Intermediate level radioactive waste drums, which have been temporarily stored on site, to a disposal facility, their physical and chemical properties should be evaluated and proven to meet the acceptance guideline prior to their shipment. Ultrasonic velocity method, which has been used to estimate the strength of concrete, can be suggested to evaluate the compressive strength of solidified radioactive waste, which is one of the evaluated properties. The strength is estimated from acoustic velocity. However, a guided wave traveling along a drum is generated when applying ultrasonic method to the drum, and this makes it difficult to analyze the signal due to overlap between transmitted wave through the contents in drum and the guided wave. This paper reported feasibility of ultrasonic method to evaluate of the compressive strength of the solidified LLW. It is observed that the guide wave is greater than transmitted wave, and ultrasonic velocity could be estimated from transmitted wave signal arriving prior to the guided wave

• International Journal of Concrete Structures and Materials
• /
• 제3권1호
• /
• pp.25-32
• /
• 2009

A non-destructive testing (NDT) method for evaluating physical properties of concrete including the compressive strength is highly desirable. This paper presents such an NDT method based on measurement of electromagnetic (EM) properties of the material. Experiments are carried out on cement mortar with different water/cement (W/C) ratios. Their EM properties including the conductivity and the dielectric constant are measured at different exposure conditions and curing periods over a wide frequency range of the EM wave. The compressive strength of these specimens is also tested. It is found that both the conductivity and the dielectric constant increase as the W/C ratio decreases and the curing period increases, which lead strength development in the specimens. A linear correlation is observed between the averaged EM properties over the 5 to 20 GHz frequency range and the measured compressive strength, demonstrating the effectiveness of the EM property-based NDT method in evaluating strength of OPC mortar.

• 대한치과기공학회지
• /
• 제21권1호
• /
• pp.55-65
• /
• 1999

So far, I Conducted an examination with focus on the type, characteristic, and test methods of impact test. which is a type of mechanical that evaluate materials. As mentioned previously, in testing soldering strength of soldering is the load when the object under experiment is broken down with the result of flexibility test or peel test. In this method, a hevay load is necessary until alloy of parent metal is bended, if the alloy of the parent metal has a large mechanical quality(peel strength or resisting power). Once the alloy of the parent metal is bended, however, it tends to come into pieces abruply form the part where soldered. Therefore, a metal has a high breakdown value if the degree of strength of its parent metal is high even if the result of measurement indicates otherwise. Thus, the result of the test did not correspond to the clinical result. Therefore, this study concludes as the following from a test of strength of soldering by mean of conducting an impact test, which is a type of mechanical evaluation methods : 1. Among various impact tests, a charpy thpe is more appropriate than the izod type in testing strength of soldering. 2. As far as test piece is concerned, to use subsized impact test piece is appropriate in the impact test in that it does not have notch. 3. In the matter of analysis, it is appropriate to measure absorbing energy which results from rupture of test piece.

• 대한금속재료학회지
• /
• 제50권2호
• /
• pp.146-151
• /
• 2012

The present article shows how the fracture strength of single crystal silicon chips, which are generally used as semiconductor devices, is influenced by loading rate variation during a 3-point bending test. It was found that the fracture strength of the silicon chips slightly increases up to 4% with increasing loading rate for loading rates lower than 20 mm/min. Meanwhile, the fracture strength of the chips hardly increases with increase of loading rate to levels higher than 40 mm/min. However, there was an abrupt transition in the fracture strength within a loading rate range of 20 mm/min to 40 mm/min. This work explains through microscopic examination of the fracture surface of all test chips that such a big transition is related to the deflection of crack propagation direction from the (011) [${\bar{1}}00$] system to the (111) [${\bar{2}}11$] system in a particular loading rate (i.e. from 20 mm/min to 40 mm/min).

• 대한물리치료과학회지
• /
• 제5권4호
• /
• pp.795-807
• /
• 1998

The purpose of this study was to investigate the effects of exercise therapy to oldwomen's muscle strength, flexibility and IADL. To identify the effect of exercise therapy on oldwomen's muscle strength, flexibility and IADL, this study attempted to determine grip strength, back strength, leg strength, flexibility of upper and low(flexion, extension, abduction), flexibility of trunk(flexion, extension) and IADL, using dynamometer, goniometer and Geriatric center IADL, for 34 female. Thirty-four subjects participating in this study consisted of A group(from sixty-five to sixty-nine, eleven person), B group(from seventy to seventy-four, twelve person), C group(over seventy-five years old, eleven person). Data from the findings of this experiment were computed for and standard deviation by using repeated measurement of MINI TAB. As a result, the following conclusion was drawn : 1. Subject group showed significantly higher scores on effect of exercise between three age group after regular exercise. 2. Subject group showed significantly higher scores on muscle strength(grip strength, back strength, leg strength) and there is a difference between three age group after regular exercise of muscle strength. 3. Subject group showed significantly higher scores on flexibility (upper, lower, trunk) and there is a difference between three age group after regular exercise of flexibility. 4. Subject group showed significantly higher scores on IADL(Instrumental activities of daily living) and there is a difference between three age group after regular exercise. As a result of this study, the effect of exercise training program had improved muscle strength, ROM (range of motion) of joint, IADL. Thus exercise training program could be beneficially applied for the prevention of disability and promotion of health and wellbeing in the aged easily and safely.

• The Journal of Korean Physical Therapy
• /
• 제33권6호
• /
• pp.292-296
• /
• 2021

Purpose: The purpose of this study was to investigate the exercise effect of two types of training with a recumbent cycle ergometer on ankle muscle strength (dorsiflexor strength, DFS; dorsiflexor strength/weight, DFS/kg; plantar flexor strength, PFS; and plantar flexor strength/weight, PFS/kg) in healthy male subjects. Methods: Twenty-three healthy males (27.91±8.66 yr) were randomly allocated into two groups (high-intensity interval training (HIIT), and aerobic exercise training (AET) after the first measurement. The subjects were trained for 24 sessions (40 min/rep, three times/week) and ankle strength was measured for a second time. Two-way mixed model analysis of variance (ANOVA) was used to identify significant differences between changes in ankle muscle strength between before and after training (within factors) in the HIIT and AET groups (between factors). The statistical significance level was set at α=0.05. Results: In both HIIT and AET groups, all variables of ankle muscle strength were significantly increased after training compared to before training (p=0.001). However, there were no differences in all variables of ankle strength between the HIIT and AET group (p>0.05). Conclusion: Both types (HIIT and AET) of recumbent cycle exercise training could be effective training methods to increase ankle muscle strength in healthy individuals, and the HIIT type with high intensity and low frequency pedaling could be recommended more to strengthen ankle muscles.

• 대한치과기공학회지
• /
• 제25권1호
• /
• pp.41-62
• /
• 2003

In this research, we manufactured the paste opaque porcelains using Propylene Glycol (PG) and Buthylene Glycol (BG) as a solvent, and compared the composition of solvents, the coefficient of thermal expansion, the particle size distribution, the viscosity and bonding strength to metal, and the tone with those of the commercial products(Duceram Plus, Duceram GmbH; VMK 95, Vita Co.; Noritake EX-3, Noritake Co.)used in the clinical field. The results of the research were as follows: 1. The result of solvent analysis indicated that the solvents included in the paste opaque porcelains of the control group were mainly composed of Glycols. 2. From the Coefficient of thermal expansion measurement, we drew out the following results; testing group: $14.0\times10^{-6}/^{\circ}C$, Duceram Plus: $13.9\times10^{-6}/^{\circ}C$, VMK 95: $14.3\times10^{-6}/^{\circ}C$, and Noritake EX-3: $13.3\times10^{-6}/^{\circ}C$. 3. Seen from the result of particle size distribution measurement, the experimental group was similar to the control group in 1$\mu m$ below, but the experimental group marked the highest distribution of 61% in the case of between 1$\mu m$ and 5$\mu m$. Between 5$\mu m$ and 10$\mu m$, they showed relatively similar distribution, and Noritake EX-3 was turned out the highest distribution of 29% in 10$\mu m$ above. 4. From the result of viscosity measurement, Duceram plus showed the highest viscosity throughout all the measurements followed by Noritake Ex-3, experimental group and VMK 95 in decreasing order. 5. The result of bonding strength measurement was EX 35.53 $\beta\acute{A}$, DU 40.88 $\beta\acute{A}$, VM 39.43 $\beta\acute{A}$, and NO 35.39 $\beta\acute{A}$, and no significant difference was found between the experimental group and the control groups(P>0.05). 6. The measurement of the tone indicated that the $L^*$ value of the experimental group was 86.89 0.63 in average, which is higher than the control group in its brightness. In the case of the $a^*$ value, Duceram Plus, VMK 95 and EX-3 showed positive value, whereas the testing group was turned out negative value. In $b^*$ value, Duceram Plus proved the highest. From the results of this research, the paste opaque porcelains using Propylene Glycol (PG) and Buthylene Glycol (BG) as a solvent did not make differences from the commercial products that are actually used in the clinical fields. Therefore, it is possible to utilize Propylene Glycol (PG) and Buthylene Glycol (BG) for the paste opaque porcelains of P.F.M crown. It is also recommended that further researches concerning the compositions and forms of powder, the types of organic solvent components and the ratio of mixture proceeded in order to improve the level of productivity in the future.