• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권1호
• /
• pp.84-87
• /
• 2006

Batch binding experiments were performed to assess the recovery performance of glyceraldehyde 3-phosphate dehydrogenase (G3PDH) bound to the unshielded and polymer (polyvinyl pyrrolidone. PVP)-shielded dye-ligand (Cibacron Blue 3GA) adsorbent. The adoption of a polymer-shielded, dye-ligand technique facilitated the elution efficiency of bound G3PDH. It was demonstrated that the recovery of G3PDH using polymer-shielded dye-ligand adsorption yielded higher elution efficiency, at 60.5% and a specific activity of 42.3 IU/mg, after a low ionic strength elution (0.15 M NaCl). The unshielded dye-ligand yielded lower elution efficiency. at 6.5% and a specific activity of 10.2 IU/mg.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.103-104
• /
• 2019

The aim of the research is assessing the possibility of recovering the compressive strength of the mortar mixture replaced excessively high volume of blast furnace slag accidently. As a result of the experiment, in the case of compressive strength, painting sodium oxide showed higher compressive strength recovery effect than painting calcium oxide. As a curing temperature, 20℃ showed advanced result rather than 65℃. From the wet curing, the reaction was confirmed, deeper penetration depth was checked at 20℃ than 60℃ temperature. Therefore for the concrete mixture with excessively high volume of blast furnace slag, it is considered that painting sodium hydroxide and curing 20℃ can recover the compressive strength effectively.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권1호
• /
• pp.125-132
• /
• 2010

최근 건설 사업에서 FRP를 단순 부착하여 구조물을 보강하는 공법은 현재 가장 널리 사용되고 있는 보수보강법이다. 본 논문에서는 FRP로 보강된 철근콘크리트 구조물은 지속하중을 받고 있기 때문에 크리프와 건조수축의 영향을 받는다. 이로 인하여 FRP의 보강효과도 달라지며, 처짐 및 변형의 회복성능, 잔존 내력 역시 크게 달라진다. 따라서 CFRP, GFRP가 휨성능에 영향을 미치는 보강 성능을 파악하고, 일정 시간이 흐른 후 하중을 제거하여 장기 변형 및 처짐의 회복성능을 파악하고, 잔존하는 내력을 알아보고자 정적 재하 실험을 수행하였다. 실험한 결과, FRP 보강 실험체는 즉시 처짐을 제어하는 측면은 매우 효율적이고, 즉시변형 회복량 또한 즉시 변형량보다 큰 결과를 보였다. 잔존강도 실험을 통하여 CFRP로 보강된 실험체가 가장 큰 내력을 가지는 것으로 나타났다. FRP로 보강된 보는 지속하중에 의한 부착성능 및 잔존내력에는 영향이 없었던 것으로 판단된다.

• 한국방재학회 논문집
• /
• 제5권4호
• /
• pp.29-36
• /
• 2005

본 연구는 부산 가덕도 부근 해성점토에 대하여 일축압축시험을 실시하여 일축압축강도, 최대강도에서의 변형률, 심도와의 관계를 비교 및 분석하였으며 시료에 포함되어 있는 불순물과 시료채취시 충진율이 흙의 일축압축강도와 교란도에 미치는 영향을 파악하였다. 시험결과 시료의 일축압축강도는 최대강도에서의 변형률이 증가함에 따라 감소하는 결과를 보였으며 채취 심도가 깊을수록, 시료채취시의 충진율이 좋을수록 증가하는 추세를 보였다. 특히 시료 충진율의 증가는 일축압축강도 증가를 가져왔고 시료의 등급 또한 높여주었다.

• 대한물리치료과학회지
• /
• 제4권1호
• /
• pp.229-242
• /
• 1997

This study was performed to figure out effects of stroke rehabilitation on education using isokinetic exercise on physical function recovery. It is considered isokinetic exercise will playa primary role in muscle strength, ROM of joint, and body balance recovery for stroke rehabilitation and so far can be used as a basic references to increase the health of all people. The study consisted of 42 stroke patient(21 training group, 21 control group) diagnosed as cerebral hemorrhage from Oriental Rehabilitation Department of Kyung Hee University. Upper extremity and lower extremity exercise was performed in the training group using isokinetic ergometer. The recovery of physical function(muscle strength, ROM of joint, body balance) data between the two groups were compared and ana lysed by paired t-test are as followed. 1. Muscle testing record showed increased in the strength of elbow flexion, knee flexion, knee extension, ankle extension of the training group com paired to control group(p < .05). In the measurement of ROM, however other parts of the body motion showed no significant changes, only shoulder extension of the training group was increased(p < .05). 2. Body balance increase was highly significant in all training group compaired to control group(p<001). Based on these findings, stroke rehabilitation education with isokinetic ergometer showed available effects on recovery of physical function rehabilitation program with isokinetic exercise will play a primary role in the recovery of physical function of stroke or brain injury patients as well as to promote the health of all people.

• 항공우주시스템공학회지
• /
• 제10권2호
• /
• pp.22-26
• /
• 2016

Whole airplane recovery parachute system(WARPS) is a auxiliary safety system to protect occupants in emergency situation where recovery to normal flight condition is impossible. In this paper, application and certification cases of WARPS for Part 23 small airplane is introduced and considerations in certification of the WARPS installed airplane are provided in terms of performance of parachute, function and operation, loads and strength and protection of occupants.

• 한국의류학회지
• /
• 제26권10호
• /
• pp.1401-1411
• /
• 2002

To Save energy and cost one bath/one step dyeing and finishing on cotton/polyester blends is carried out with disperse dyes in the presence of crosslinking agent. Cotton 100 %, cotton/polyester 70/30, 50/50, 35/65, polyester 100 % fabrics were used. wrinkle recovery angle, tensile strength retention and tearing strength retention were determined in according to the dyebath composition, and also determined while the concentration of DMDHEU, molecular weight and concentration of PEG were varied. Colorfastness to abrasion, washing and light were tested. For cotton and cotton/polyester blends dyed in the presence of DMDHEU/PEG, wrinkle recovery was improved. Tensile strength retention and tearing strength retention were decreased, in compared with dyed fabrics without DMDHEU. Colorfastness to abrasion was good but colorfastness to washing and to light were poor for the fabrics dyed in the presence of DMDHEU/PEG.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.199-200
• /
• 2019

The purpose of the research is assessing the possibility of strength recovery for mortar added with accidently high amount of fly ash. For compressive strength at 28 day, the sample painted with sodium hydroxide showed higher compressive strength than the sample painted with calcium hydroxide. Regarding the curing conditions, the curing temperature 65℃ provided better conditions than the curing temperature 20℃ in aspect of solution penetration depth and reactivity of fly ash. In the case of drying after saturation, the case painted with sodium hydroxid 65℃ showed the clearest engrossing mark.

• 상하수도학회지
• /
• 제30권1호
• /
• pp.105-111
• /
• 2016

This paper presents the applicability of natural zeolite (Clinoptilolite) for recovery of ammonium nitrogen from high-strength wastewater stream. Isotherm experiments showed the ammonium exchange Clinoptilolite followed Freundlich isotherm and its maximum exchange capacity was $18.13mg\;NH_4{^+}-N/g$ zeolite. The X-ray photoelectron spectroscopy (XPS) analysis indicated that a significant amount of nitrogen was adsorbed to the Clinoptilolite. Optimal flowrate for recovery of high concentration ammonium nitrogen was determined at 16 BV/d (=19.2 L/min) throughout the lab-scale column studies operated under various flowrate conditions. This study also provided a method to determine the recovery rate of final product of nitrogen fertilizer based on the model application to the lab-scale continuous data.

• 대한치과기공학회지
• /
• 제12권1호
• /
• pp.113-119
• /
• 1990

The purpose of this study was to investigate the effect of surface tretment on strength of denture repair as influenced by repair resin. Specimens were fabricated from VERTEX heat cured resin. Rectangular specimens($60\times10\times3mm$) were prepared according to the manufacturer's instruction for mixing and packing the resin into molds. Two methods of surface treatment were used and two methods of repair were also tested. The transverse strength of the resin was measured before repair and after repair by AUTOGRAPH testing machine. Six specimens of each category were prepared for testing for a total of 24 specimens. The mean value of the percent of recovery was calculated from the percent of recovery for six specimens. The results were as follows : 1. The mean value of the percent of recovery of each category makes a significant difference statistically one another(p<0.01), and "C" category, chloroform solvent-heat cured resin, has a better effect on repair srength than any other. 2. When no chloroform is used to treat the fractured surface there is no significant difference between the mean values of the percent of recovery influenced by the self curing resin and heat cured resin. But, when chloroform is used there is a significant difference between the two repair resins(p<0.01). 3. When self curing resin repair is used there is no significant difference between repair with and without the surface treatment of chloroform. But, when heat cured resin repair is used the use of chloroform treatment become significant statistically (p<0.01).