• 펄프종이기술
• /
• 제35권1호
• /
• pp.1-6
• /
• 2003

This study was carried out to investigate the effect of internal fibrillation on the pulp and paper properties. The internal fibrillation was introduced into the SwBKP and recycled SwBKP by the mechanical treatment with Hobart mixer. WRV and physical properties of SwBKP were improved by the internal fibrillation. However the mechanical treatment of recycled SwBKP resulted in the decrease of strength properties of paper except for the tear index, although it was observed that WRV was somewhat increased by the mechanical treatment. The decrease of strength properties of recycled SwBKP might be caused by the hornification of fiber and the decrease of fiber strength.

• Journal of Microbiology and Biotechnology
• /
• 제7권4호
• /
• pp.282-286
• /
• 1997

The floc strength of Escherichia coli was enhanced by adding water soluble polymer flocculants (BPA-5020 and BPA-5000) to the particulate flocculant (BPA-1000) as indicated by the increase in the shear index. The shear index of the E. coli flocs increased from 0.39 with the particulate flocculant alone to 0.94 with the particulate flocculant in conjunction with the water soluble polymer flocculant. In addition, the sedimentation rate of flocs was higher and the sedimented volume of flocs was smaller when the particulate flocculant was used with the water soluble polymer flocculant. When E. coli was flocculated first with the water soluble flocculant and the particulate flocculant was added later into the E. coli flocs formed, the sedimentation rate of the flocs was greater than that of any other combination. The shear index of the flocs was, however, independent of the sequence of the flocculant addition.

• 한국지반환경공학회 논문집
• /
• 제10권3호
• /
• pp.37-45
• /
• 2009

대구지역에 분포하는 고유이방성 셰일(shale)의 점재하지수 및 일축․압축강도 특성을 평가하기 위한 일련의 실험실 시험을 수행하였다. 또한 시험시편의 크기효과 및 형태효과를 조사하기 위하여 축방향 및 직경방향으로 점재하지수를 측정하였다. 일반적으로 직경방향의 점재하지수는 길이/직경(L/D)비가 대략 1.0 이상일때 일정한 값을 보이고 축방향 점재하 시험 결과 L/D비의 증가에 따라 평균 점재하지수가 약간 감소하는 경향을 보였으며 L/D비가 1.0 이상이면 corner파괴가 발생하였다. 최소의 점재하지수는 층리면이 연직과 이루는 각 ($\beta$)이 $15^{\circ}{\sim}30^{\circ}$에서 나타났고 ${\beta}=30^{\circ}$에서 최소의 일축압축강도가 얻어졌다. $\beta$ 값의 범위가 $0^{\circ}{\sim}90^{\circ}$인 시편의 점재하지수와 일축압축강도를 측정하여 이들의 상호관계를 회귀분석하였다. 층리면을 $0^{\circ}$에서 $90^{\circ}$까지 변화시키면서 측정한 점재하지수는 일축압축강도와 선형적인 관계인 ${\sigma}_c=25.0 I_{s(50)}$로 나타났다. 한편, 층리각($\beta$)를 90${^{\circ}}$로 고정시킨 상태에서의 이들의 상관성은 ${\sigma}_c=14.4 I_{s(50)}$로 나타났는데, 이는 ISRM(1985)에서 추천하는 층리가 없는 무결암 시료에 대한 일반적인 상관성, ${\sigma}_c=22 I_{s(50)}$과는 많은 차이가 있음을 확인하였다. 일축압축강도의 이방성 모형은 기존의 Ramamurthy(1993)이론에 지수 'n'을 도입하여 n= 3을 적용 했을때 측정결과와 잘 부합되는 결과를 얻었다.

• The Journal of Korean Physical Therapy
• /
• 제21권3호
• /
• pp.69-74
• /
• 2009

Purpose: This study examined that effect of a change in balance index on ankle Kinesio taping, muscle strength exercises and taping after muscle strength exercises in 30 healthy adult subjects. Methods: The Sway Index of the left, right, front and back on stable, toes up and linear were compared using a Balance System, a balance experimental instrument. Results: The pre and post experimental balance index regarding stable, toes up, and linear were taken for the Kinesio taping group, lower extremities muscle strengthening group, and muscle strengthening with the Kinesio taping group. Statistically significant decreases were observed in all variables except for the left and right pre and post experiment results under stable conditions. Conclusion: The balance index of exercise with taping was lower than that of exercise only. There is a need for objective research on the long-term applications and post-exercise. The body balance appears to be influenced by ankle stabilization using taping.

• Geomechanics and Engineering
• /
• 제21권4호
• /
• pp.391-399
• /
• 2020

Brittleness is one of the most important properties of rock which has a major impact not only on the failure process of intact rock but also on the response of rock mass to tunneling and mining projects. Due to the lack of a universally accepted definition of rock brittleness, a wide range of methods, including direct and indirect methods, have been developed for its measurement. Measuring rock brittleness by direct methods requires special equipment which may lead to financial inconveniences and is usually unavailable in most of rock mechanic laboratories. Accordingly, this study aimed to develop a new strength-based index for predicting rock brittleness based on the obtained base form. To this end, an innovative algorithm was developed in Matlab environment. The utilized algorithm finds the optimal index based on the open access dataset including the results of punch penetration test (PPT), uniaxial compressive and Brazilian tensile strength. Validation of proposed index was checked by the coefficient of determination (R²), the root mean square error (RMSE), and also the variance for account (VAF). The results indicated that among the different brittleness indices, the suggested equation is the most accurate one, since it has the optimal R², RMSE and VAF as 0.912, 3.47 and 89.8%, respectively. It could finally be concluded that, using the proposed brittleness index, rock brittleness can be reliably predicted with a high level of accuracy.

• 터널과지하공간
• /
• 제23권3호
• /
• pp.212-218
• /
• 2013

풍화된 응회암 시험편을 모사하기 위하여 최고 예열온도를 200, 400, 600($^{\circ}C$)로 한 예열시험편을 제작하였다. 각 예열시험편에 대한 실내시험을 통해 비중, 흡수율, 탄성파속도, 일축압축강도, 압열인장강도, 탄성계수, 포아송비, 슬레이크 내구성 지수를 측정하였다. 암석에 열을 가하는 경우 물성의 열화가 발생하는 것으로 나타났으나 예외적으로 슬레이크 내구성 지수는 별로 영향을 받지 않는 것으로 평가되었다. P-파 속도와 일축압축강도, 압열인장강도, 탄성계수, 흡수율 간에는 상당한 상관성이 있는 것으로 해석되었으며, P-파 속도를 알면 일축압축강도, 압열인장강도, 탄성계수, 흡수율을 추정할 수 있는 회귀식을 도출하였다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.136-141
• /
• 1998

While a little research has been peformed on flexural behavior of reinforced polymer concrete (RPC)beams with the compressive strength lower than 900kg/$\textrm{cm}^2$ vary little exists in conjunction with the behavior of RPC 1,000kg/$\textrm{cm}^2$ or higher in compressive strength. In this paper the flexural performance of high strength polymer concrete beams with 1,450kg/$\textrm{cm}^2$ in compressive strength was evaluated. The unsaturated polyester resin was used to make polymer concrete as binder. The beams with stirrup singly/doubly were tested to examine the effect of tensile reinforcement ratio. As test results, reinforcement ratio increased with the increase moment strength, decreased with ultimate deflection, ductility index.

• 한방재활의학과학회지
• /
• 제27권1호
• /
• pp.37-51
• /
• 2017

Objectives This study was designed to identify the effect of acupuncture combined with wooden neck pillow self-exercise program (WSP). Methods 25 eligible subjects with chronic neck pain were recruited from September 2015 to August 2016. Subjects were treated by acupuncture twice a week for 4 weeks, also were educated WSP and exercised every day for 4 weeks. They were assessed using PI-NRS, NDI and the maximum muscle strength of deep cervical flexor muscles (DCF) before and after treatment. Also the Cobb's angle (C1-C7), Ishihara index, Park method were assessed for evaluating the radiographical changes. Variables were compared using paired t-test. And correlates analysis was used for analyzing relationship between differentials in the maximum muscle strength of DCF and differentials in cervical spine curvature measurement methods. Results Among the 25 subjects, 4 subjects were lost to follow-up or excluded in accordance with the criteria. Significant differences on NRS, NDI and the maximum muscle strength of DCF were seen after treatment (p<0.001). In radiological finding, cervical spine curvature measurement methods were significantly increased (p<0.001, p<0.05, p<0.05). Differentials in the maximum muscle strength of DCF significantly correlates to differentials in Ishihara index (R=0.479, p<0.05). Conclusions Acupuncture combined with WSP may decrease neck pain intensity and associated disability, and also increase the muscle strength of DCF and cervical lordosis, in patients with chronic neck pain. Especially, Improving the muscle strength of DCF has a relationship with improving Ishihara index. However, due to the design of this study, this treatment can not be compared with other treatments. Future randomized project should be needed.

• 지질공학
• /
• 제23권4호
• /
• pp.341-352
• /
• 2013

본 연구에서는 생성 당시의 퇴적환경이 상이한 것으로 알려진 대구지역의 적색 셰일과 흑색 셰일의 물리적 및 역학적 특성을 확인하기 위하여 단위중량, 흡수율, 공극률, 초음파속도, 일축압축강도, 점하중강도, 슬레이크 내구성 및 열화특성 시험 등을 실시하였고, XRD 및 XRF 분석과 SEM 영상 분석을 수행하였다. 시험결과 두 셰일의 단위중량은 유사하였으나 흡수율과 공극률은 적색 셰일이 흑색 셰일보다 더 높았다. 특이하게도 공극률이 높은 적색 셰일의 초음파속도, 일축압축강도, 점하중강도지수 가 흑색보다 더 높은 값을 보였는데 이는 흑색 셰일 내에 발달된 엽층리의 영향인 것으로 판단된다. 열화시험에서는 용액의 산성도가 증가할수록 또 수침시간이 길어질수록 시료의 점하중강도지수와 슬레이크 내구성지수의 저감정도가 심하였으며, 흑색 셰일보다는 공극률이 큰 적색 셰일에서 더 크게 영향을 받는 것으로 나타났다.

• 대한건축학회논문집:구조계
• /
• 제34권2호
• /
• pp.29-40
• /
• 2018

Strength design wind loads for the wind resistance design of structures shall be evaluated by the product of wind loads calculated based on the basic wind speed with 100 years return period and the wind load factor 1.3 specified in the provisions of load combinations in Korean Building Code (KBC) 2016. It may be sure that the wind load factor 1.3 in KBC(2016) had not been determined by probabilistic method or empirical method using meteorological wind speed data in Korea. In this paper, wind load factors were evaluated by probabilistic method and empirical method. The annual maximum 10 minutes mean wind speed data at 69 meteorological stations during past 40 years from 1973 to 2012 were selected for this evaluation. From the comparison of the results of those two method, it can be found that the mean values of wind load factors calculated both probability based method and empirical based method were similar at all meteorological stations. When target level of reliability index is set up 2.5, the mean value of wind load factors for all regions should be presented about 1.35. When target level of reliability index is set up 3.0, wind load factor should be presented about 1.46. By using the relationship between importance factor(conversion factor for return period) and wind load factor, the return periods for strength design were estimated and expected wind speeds of all regions accounting for strength design were proposed. It can be found that return period to estimate wind loads for strength design should be 500 years and 800 years in according to target level of reliability index 2.5 and 3.0, respectively. The 500 years basic wind speed map for strength design was suggested and it can be used with a wind load factor 1.0.