• The Journal of Engineering Geology
• /
• v.14 no.3 s.40
• /
• pp.273-285
• /
• 2004

The mechanical properties of the Cretaceous tuff distributed in the Goheung area were measured in the laboratory. Tuff (Goehung tuff and Palyeongsan welded tuff) in the study area is classified into vitric tuff with regard to its composition. The specific gravity, the dry density, the water content, the porosity and absorption ratio in tuffs of the study area are 2.51, $2.52(g/cm^2)$, 0.12($\%$), 4.51($\%$) and 1.91($\%$) in means, respectively. In the tuffs, dry densities are in inverse Proportion to Porosities, and absorption ratios are highly proportional with Porosities. The uniaxial compressive strengths(UCS) in the tuffs ranges from 80.4 to 208(MPa) and the average of the strength is 141.1(MPa). According to the engineering classification of intact rock (Deere & Miller, 1966), the tuffs are assigned to the high strength rocks. The point load strength index ($Is_a$) in axial test is 4.2(MPa) on the average, and the point load strength index ($Is_d$) in diametral test is 2.2(MPa) in mean, and the point load strength anisotrophic index($Ia_{(50)}$) by the ratio of $Is_a$ to $Is_d$ is 1.93. There is close linear correlation between the uniaxial compressive strength and point load strength index, and the equation representing the correlation is postulated as follows : UCS = 22 $Is_{(50)}$ +49 (MPa) (r=0.95). It is considered that this equation is a useful tool to estimate UCS for tuff in Goheung area.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.1
• /
• pp.31-35
• /
• 1973

Strength, elongation and elasticity are essential properties with regard to the tensile properties of raw silk thread. The reasonable harmony of the above three physical characters appears to be the specific nature of the raw silk thread and the dynamical functions are determined by the cocoon filament forming the raw silk. From such viewpoint, the author has studied the tensile property of the thread when the cocoon filament is stretched and transformed. The results obtained are as follows: 1) The stretching strength of the inner layer filament is stronger than that of the outer and medium layer ones. 2) The stretching strength of the filaments is influenced by the moisture-heat denaturalization of cocoon layer sericin in the drying process. 3) The more transformed functions by the stretching become, the lower the elasticity index of the cocoon filament was shown. 4) When cocoon layer sericin is denatured by moisture and heat, elasticity index of the filament is decreased.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.11
• /
• pp.15-26
• /
• 2007

Los Angeles abrasion loss test has usally been applied to the quarry for the purpose of aggregate hardness estimation. 324 blocks from 25 sites of Kyeongsang basin samples of sedimentary rock were examined and tested in laboratary. This paper found that L. A. abrasion loss test is a good method to estimate engineering index such as uniaxial compressive strength, elastic modulus, indirect tensile strength, point load strength index, Schmidt hammer rebound value of sedimentary rocks with high correlation factor. Engineers will prefer L. A. abrasion loss test to the other one for design and construction as this method is quick and easy.

• The Korean Journal of Rheology
• /
• v.8 no.3_4
• /
• pp.226-231
• /
• 1996

침강제에 의해 형성된 E. coli floc들의 강도를 측정하기 위해 floc 의 shear index를 측정하였다. 형성된 E. coli floc은 10/sec 같이 낮은 shear rate에서도 분쇄되거나 변형되었 다. 측정된 shear index의 감소에서 보듯이 E. coli floc의 강도는 염의 농도가 증가함에 EK 라 감소하였다. E. coli floc의 shear index는 NaCl의 농도가 0에서 100 mM로 증가함에 따 라 0.47에서 0.09로 줄었다. 발효배지의 조성에서 형성된 E. coli floc들은(shear index=0.18-0.24 with BPA-1000. 0.13-0.22 with BPA-1050 and 0.37-0.42 with BPA-5020) 염이 없을 때 형성된 floc에(shear index=0.47 with BPA-1000 and 0.46 with BPA-1050) 비 해 약하였다. 따라서 발효배지에서 형성된 floc은 생물공정 중 쉽게 shear에 의해 분쇄되거 나 변형될것이다.

• Korean Journal of Materials Research
• /
• v.28 no.8
• /
• pp.452-458
• /
• 2018

This research is conducted to create a functional hydrogel ophthalmic lens containing nanoparticles. Carbon nanoparticles and PEGMEMA are used as additives for the basic combination of HEMA, MA, and MMA, and the materials are copolymerized with EGDMA as the cross-linking agent and AIBN as the thermal initiator. The hydrogel lens is produced using a cast-mold method, and the materials are thermally polymerized at $100^{\circ}C$ for an hour. The polymerized lens sample is hydrated in a 0.9 % saline solution for 24 hours before the optical and physical characteristics of the lens are measured. The refractive index, water content, contact angle, light transmittance, and tensile strength are measured to evaluate the physical and optical characteristics of the hydrogel lens. The refractive index, water content, contact angle, UV-B light transmittance, UV-A light transmittance, visible light transmittance, tensile strength and breaking strength of the hydrogel lens polymer are 1.4019~1.4281, 43.05~51.18 %, $31.95{\sim}68.61^{\circ}$, 21.69~58.11 %, 35.59~84.26 %, 45.85~88.06 %, 0.1075~0.1649 kgf and 0.1520~0.2250 kgf, respectively. The results demonstrate an increase in refractive index, tensile strength and breaking strength and a decrease in contact angle and light transmittance. Furthermore, the visible light transmissibility is significantly increased at PEG 10 %. It is clear that this material can be used for high-performance ophthalmic lenses with wettability, ultraviolet ray blocking effect, and tensile strength.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2234-2241
• /
• 2015

This study has been undertaken to develop a relationship between the shear strength coefficients and the cone index. The theoretic mathematical equations for the relationship were rigorously investigated, and then a Artificial Neural Network(ANN) analysis was adapted to enhance the reliability of the investigation. The theoretical investigation involved various assumptions resulting in the significant error involvement of geotechnical behaviors of ground. Therefore, a model using the ANN has been learned to enhance the prediction of the cone index form the shear strength parameters. Site investigation reports from various construction fields were used for ANN model learning. The results of the study show that the model predicts the cone index from the shear strength parameters of soils very well. The further study that is undertaking has a potential promise of the generalized prediction technique for the cone index from the soil parameters.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.05a
• /
• pp.69-74
• /
• 2002

The following results are achieved from a mortar flow test depending on stainless steel slag fineness, replacement ratio, and a research on material age compressive strength, strength activity index. 1. Flow is proportional to the stainless steel slag fineness within the limits of 4000~8000$\textrm{cm}^2$/g, but in the case of fineness 20000$\textrm{cm}^2$/g flow decreases at all conditions except the case of replacement ratio 10%. 2. As stainless steel slag replacement ratio increases, Mortar of flow somewhat decreases. 3. As stainless steel slag blends, compressive strength decreases, but in proportion to the increase of age, compressive strength increases. 4. As stainless steel slag replacement ratio, compressive strength decreases. 5. In the case of stainless steel slag fineness 6000$\textrm{cm}^2$/g and 20.000$\textrm{cm}^2$/g, compressive strength of revelation ratio has the maximum value when it's replacement ratio is 10%.

• Steel and Composite Structures
• /
• v.18 no.1
• /
• pp.71-90
• /
• 2015

Axial compression tests have been carried out on 18 rectangular concrete-filled cold-formed steel tubular (CFST) columns with the aim of investigating the axial behaviour of rectangular CFST columns under different loading methods (steel loaded-first and full-section loaded methods). The influence of different loading methods on the ultimate strength of the specimens was compared and the development of Poisson's Ratio as it responds to an increasing load was reported and analysed. Then, the relationship between the constraining factor and the strength index, and the relationship between the constraining factor and ductility index of the specimens, were both discussed. Furthermore, the test results of the full-section loaded specimens were compared with five international code predicted values, and an equation was derived to predict the axial carrying capacity for rectangular CFST columns with a steel loaded-first loading method.

• Tunnel and Underground Space
• /
• v.3 no.2
• /
• pp.167-174
• /
• 1993

Index tests are useful because they are rapid and cheap-and if bias is known the fundamental property can be estimated, as when estimating the compressive strength or the tensile sterngth from the rock test hammer value. Index tests which have proved to be very useful are the rock test hammer, the point load test and sonic velocity test. These can provide index values in their owing right or be used to estimate the compressive strength, the tensile strength and elastic modulus. Because of the heterogeneous and fractured nature of rock, many index tests have been developed for a variety of purposes, e.g.for use in rock mass classification schemes.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.883-888
• /
• 2001

In Korea, countermeasures against earthquake disasters such as the seismic performance evaluation and/or retrofit scheme of buildings have not been fully performed since Korea had not been experienced many destructive earthquakes in the past. The main objective of this paper is to propose the basic seismic protection index (Es) suitable to Korean buildings based on the seismic evaluation of existing reinforced concrete buildings using modified strength index. This paper will focus on 1) the selection of weak and moderate earthquake waves representing Korean seismic zone, 2) the creation of the required strength ratio spectra by seismic response analysis, and 3) the proposition of the basic seismic protection index (Es) suitable to Korean seismic activity based on required strength ratio spectra