• International Area Studies Review
• /
• v.13 no.2
• /
• pp.393-416
• /
• 2009

This paper explores the technology resource-based determinants influencing internationalization performance of Korean software-related new ventures. On the ground of the study by Zahra et al.(2003), this paper aims to test empirically in Korea how interaction effects of tangible and intangible technological resources, as firm capability, are related to software new ventures' internationalization performance. The test results shows that intangible technological resource represented by R&D intensity is not significantly related to internationalization performance, but reveals that intangible technological resource represented by strength of technological cooperation network and technological reputation is positively and significantly associated with internationalization performance. Internationalization performance is more significantly and positively associated with the interactions of tangible technological resource and intangible technological resource than those resources respectively. The implication for the findings in the paper is that cutting edge technological capability of software new ventures can be more closely associated with internationalization performance if those resources are fully utilized or leveraged by intangible resources acquired by cooperation with local networks and created through technological reputation of new ventures.

• Clean Technology
• /
• v.24 no.4
• /
• pp.315-322
• /
• 2018

Industrial use of waste oyster shells is limited because of requiring excessive energy for converting natural oyster shells in the form of calcium carbonate ($CaCO_3$) into calcium oxide (CaO) for this purpose. This study aimed to develop energy-saving process for producing solidifying agent using waste oyster shells for backfill materials. It was suggested that oyster shells were converted to calcium sulfates which were mixed with sodium hydroxide solution and red clay, forming solid specimen. The optimal concentrations of sulfuric acid for sulfation of oyster shell and sodium hydroxide to generate calcium hydroxide ($Ca(OH)_2$), were determined. Unconfined compressive strength of solid specimen increased with increasing the content of solidifying agent while it increased also with increasing ratio of natural oyster shells to coal ash. The result clearly demonstrates that solidifying agent consisting of sulfuric acid-treated oyster shell, coal ash, and sodium hydroxide solution, can be effectively utilized for preparing backfill materials using natural oyster shell and coal ash. Sulfuric acid-treated oyster shell-based solidifying agent has not been previously developed and will contribute to broaden industrial application of waste oyster shells.

• The Journal of the Korea Contents Association
• /
• v.19 no.8
• /
• pp.500-512
• /
• 2019

Recently, almost all industries are focusing on improving the competency of related industry workers, and it is necessary to design a systematic educational activity plan that constructs, operates and evaluates learning experiences for knowledge, technology and literacy development required in the industrial field. This study performed a questionnaire survey on students' satisfaction with 2015 and 2014 curriculum and national competency standards (NCS)-based one which has been applied since March 2016 against those from Department of Beauty & Cosmetology, 'C' University. For data analysis, frequency analysis, qualitative analysis and SWOT analysis were conducted, and the results found the followings: The NCS-based curriculum which has been applied since 2016 is more advanced than 2015 and 2014 curriculum in terms of strength, weakness, risk and opportunity. In addition, their satisfaction with curriculum was more than average with 47.9-57.2%. Meanwhile, when asked their favorite time to decide their academic major, 79.5% answered, '2nd semester of the 1st year'. They were very dissatisfied with the fact that their academic major is decided in the second year. It is anticipated that the NCS-based 2-year curriculum for Dept. of Beauty & Cosmetology is redesigned through analysis of students' satisfaction and by reflecting their opinions. It is also expected that the reorganization of the curriculum in a more practical and systematic manner would increase students' satisfaction and generate workforce for cosmetology industry.

• Korean Journal of Food Science and Technology
• /
• v.50 no.6
• /
• pp.587-593
• /
• 2018

This study was carried out to investigate the effect of roasted rice bran (RRB) on the rheological properties of bread dough. According to farinograph analysis, the consistency of the control sample was greatest. There were no significant differences in water absorption (p<0.05). Lower values of development time, stability, and time to breakdown, which were affected, by the addition of RRB, were observed for RRB-containing dough samples, compared to the control dough sample. Addition of RRB significantly increased the mixing tolerance index (MTI). According to rheofermentometer analysis, the values of H'm, $T^{\prime}_1$, and retention volume decreased with increase in the amount of RRB added. According to the rapid visco analyzer (RVA) analysis, peak viscosity, holding strength, and setback values were greater in the control than in the RRB-containing samples. The addition of RRB to the flour influenced rheological properties like fermentation volume and acidity. The total acidity increased with the increase in the amount of RRB added. The present study has indicated that there was no significant difference between the rheological properties of the control and 5% RRB-containing dough samples. Therefore, the addition of 5% RRB could be an effective way to produce functional flour bread without affecting its desirable physical properties.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.396-403
• /
• 2018

In this paper, a high-performance and low-noise centrifugal fan is developed for cooling automotive seats which provide a driver with pleasant driving environment. First, the flow characteristics of the existing fan unit was analyzed using a fan performance tester and CFD (Computational Fluid Dynamics) simulations. The analysis of the predicted flow field indicated vortex flow near the tip of fan hub and stagnation flow on the top of fan hub. Two design points are devised to reduce the vortex flow and the stagnation flow observed in the existing fan unit. First, the cut-off clearance which is the minimum distance between the fan blade and the fan housing is increased to reduce the vortex strength and, as a result, to reduce the overall sound pressure level. Second, the hub shape is more modified to eliminate the stagnation flow. The validity of proposed design is confirmed through the numerical analysis. Finally, a prototype is manufactured with a basis on the numerical analysis result and its improved flow and noise performances are confirmed through the P-Q curves measured by using the Fan Tester and the SPL (Sound Pressure Level) levels measured in the anechoic chamber.

• Journal of Korean Society of Disaster and Security
• /
• v.11 no.2
• /
• pp.37-43
• /
• 2018

The storm surge is caused by an typhoons and it is not easy to predict the location, strength, route of the storm. Therefore, research using a scenario for storms occurrence has been conducted. In Korea, hazard maps for various scenarios were produced using the storm surge numerical simulation. Such a method has a disadvantage in that it is difficult to predict when other scenario occurs, and it is difficult to cope with in real time because the simulation time is long. In order to compensate for this, we developed a method to predict the storm surge damage by using research database. The risk grade prediction for the storm surge was performed predominantly in the study area of the East coast. In order to estimate the equation, COMSOL developed by COMSOL AB Corporation was utilized. Using some assumptions and limitations, the form of the basic equation was derived. the constants and coefficients in the equation were estimated by the trial and error method. Compared with the results, the spatial distribution of risk grade was similar except for the upper part of the map. In the case of the upper part of the map, it was shown that the resistance coefficient, k was calculated due to absence of elevation data. The SIND model is a method for real-time disaster prediction model and it is expected that it will be able to respond quickly to disasters caused by abnormal weather.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.4
• /
• pp.519-534
• /
• 2019

Mechanized tunneling methods, including shield TBM, have been increasingly used for tunnel construction because of their relatively low vibration and noise levels as well as low risk of rock-falling accidents. In the excavation using the shield TBM, it is important to design penetration rate appropriately. In present study, both subsurface investigation data and shield TBM excavation data, produced for and during ${\bigcirc}{\bigcirc}{\sim}{\bigcirc}{\bigcirc}$ high-speed railway construction, were analyzed and used to compare with shield TBM penetration rates calculated using existing penetrating rate prediction models proposed by several foreign researchers. The correlation between thrust force per disk cutter and uniaxial compressive strength was also examined and, based on the correlation analysis, a simple prediction model for penetration rate was derived. The prediction results using the existing prediction models showed approximately error rates of 50~500%, whereas the results from the simple model proposed from this study showed an error rate of 15% in average. It may be said, therefore, that the proposed model has higher applicability for shield TBM construction in similar ground conditions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.107-115
• /
• 2019

The many countries are facing the shortage of natural resources, and the supply of aggregates are being exhausted. To consider this situation a variety of studies were performed for the development of alternative resources. In particular, high density filler material was used for shielding radioactive waste, large amount of natural aggregates are required in order to produce filler material. Also, in order to improve the shielding performance of filler material, it is required to increase the density of the filler material. Therefore, in this study was carried out to provide basic data for expanding the feasibility of high density industrial waste resource as aggregate in heavyweight concrete. From the test results, OPC case, concrete strength decreased by using heavyweight waste glass as fine aggregate, however, it is improved by using mineral admixture as binder. Therefore, when the heavyweight waste glass and steel slag are applied to heavyweight concrete, it is desirable to use mineral admixture, especially to use BFS than FA. Meanwhile, when the steel slag was replaced as coarse aggregate of heavyweight concrete, elasticity of modulus and radiation shielding performance can be improved owing to high density of steel slag.

• Journal of Navigation and Port Research
• /
• v.43 no.1
• /
• pp.33-41
• /
• 2019

In December 2012, a pile driving boat sunk off the coast of Ulsan port in Korea. The cause of capsizing of these boats was considered a complex problem. Although Korean Ship Safety Technology Authority concluded that leaders (cranes) of the vessel were designed with sufficient safety factors, National Forensic Service concluded that the capsizing was caused by the failure of leaders. This study reviewed the related laws, strength calculations, and structural analysis methods used by the Korea Ship Safety Technology Authority. In addition, numerical simulations were carried out on hydrodynamic analysis and structural analysis to analyze the cause of vessel capsizing based on the rules of the Korean Register of Shipping. The results were similar to those found by National Forensic Service. In conclusion, the study suggested that inspection especially for a pile driving boat subjected to the Korean Register of Shipping rules should be carried out to prevent the similar accident.

• Journal of Korea Foundry Society
• /
• v.41 no.1
• /
• pp.26-38
• /
• 2021

The status of Ppuri industry, including foundry industry was analyzed through statistical surveys over the past 10 years from 2009 to 2018, and summarized for each six Ppuri industries' points of view. Various statistics of Ppuri industry defined by the KSIC (Korean Standard Industry Classification) was obtained, and the status of Ppuri industry was identified through a sample survey of 5,000 companies from more than 30,000 target business companies of Ppuri industry. Throughout the analyzing process, we presented a variety of indicators, such as the number of the Ppuri companies and its ratio, regional distribution through Korean provinces, number of workers, characteristics by age group, sales, profit rates, etc. By devising a comparative method to measure the relative strength of Ppuri industry in Korea, Germany, and Japan, we have presented the competitiveness index change over the 10 years of time. The competitiveness index can be effectively and meaningfully used during various activities of the development of Ppuri industry in the forth coming future. With the current obtained data, we figured out the status of each 6 Ppuri industries, regional distribution, status of workers, sales and profit rates. We also suggested various proposals for strategy and policy making for each sector with urging voluntary response from Ppuri industry.