• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.3 s.36
• /
• pp.197-205
• /
• 2005

Development of the packaging is one of the critical issues for commercialization of the RF-MEMS devices. RF MEMS package should be designed to have small size, hermetic protection, good RF performance and high reliability. In addition, packaging should be conducted at sufficiently low temperature. In this paper, a low temperature hermetic wafer level packaging scheme for the RF-MEMS devices is presented. For hermetic sealing, Au-Sn eutectic bonding technology at the temperature below $300{\times}C$ is used. Au-Sn multilayer metallization with a square loop of $70{\mu}m$ in width is performed. The electrical feed-through is achieved by the vertical through-hole via filled with electroplated Cu. The size of the MEMS Package is $1mm\times1mm\times700{\mu}m$. By applying $O_2$ plasma ashing and fabrication process optimization, we can achieve the void-free structure within the bonding interface as well as via hole. The shear strength and hermeticity of the package satisfy the requirements of MIL-STD-883F. Any organic gases or contamination are not observed inside the package. The total insertion loss for the packaging is 0.075 dB at 2 GHz. Furthermore, the robustness of the package is demonstrated by observing no performance degradation and physical damage of the package after several reliability tests.

• Journal of the Korean earth science society
• /
• v.32 no.4
• /
• pp.347-359
• /
• 2011

This study has developed the index for diagnosis on possibility that typhoons (TYs) affect Korea. This index is closely related to the strength of the western North Pacific high (WNPH), which is calculated as a difference in meridional wind between at the highest correlation area (around Korea) and at the lowest correlation area (sea southeast of Japan) through a correlation analysis between TC frequency that affects Korea and 500 hPa meridional wind. In low frequency years that selected from Korea affecting TC index, anomalous northeasterly is strengthened from Korea to the South China Sea because the center of anomalous anticyclonic circulation is located to northwest of Korea. Thus, TCs tend to move westward from the sea east of the Philippines to the mainland China. On the other hand, in high frequency years, anomalous southwesterly serves as steering flow that more TCs move toward Korea because the center of anomalous anticyclonic circulation is located to sea east of Japan. Consequently, this study suggests that if this index is calculated using real time 500 hPa meridional winds that forecasted by dynamic models during the movement of TCs, the possibility that TCs approach Korea can be diagnosed in real time.

• Spatial Information Research
• /
• v.17 no.1
• /
• pp.117-129
• /
• 2009

South Korea has been undergoing spring drought periodically and diverse researches using vegetation index have been carried out to monitor spring droughts. The strength of the vegetation index-based drought monitoring is that the monitoring method enables efficient spatio-temporal grasp of changes in drought events. According to the development of low resolution satellite images such as MODIS, which are characterized by outstanding temporal resolution, the use of the method is expected to increase. Drought analysis using vegetation index considered only meteorological factor as a cause that affects vitality of vegetation. But many indirect and direct factors affect vegetation stress, So many uncertainties are involved in such method of analysis. To secure objectivity of drought analysis that uses vegetation index it is therefore necessary to compare the method with most representative drought analysis tools that are used for drought management. In this study, PDSI and SPI which a meteorological drought index that quantifies drought and that is used as a basic index for drought monitoring and MODIS NDVI are compared to propose correlation among them and to show usefulness of drought assessment that uses vegetation index. This study shows changing patterns of NDVI and SPI 6-month are similar and correlation between NDVI and SPI was highest in inland vegetation cover.

• Journal of Bio-Environment Control
• /
• v.9 no.1
• /
• pp.47-59
• /
• 2000

In order to investigate the physical and chemical properties of artificial culture media, the specimens were substituted with 5~20％ clay, 10~30％(w) quick lime, 5~l5％(w) burnt plaster and 10％(w) sawdust. Fly ash-clay bodies were sintered at 1,050~1,20$0^{\circ}C$ and then their properties were determined. It was found that 90FA10JC(fly ash ＋clay(90：10, ％(w)) specimen sintered at 1,15$0^{\circ}C$ for 10 min. had good physical and chemical properties. When this composition was supplement with 10％(w) sawdust, bulk density water absorption, apparent porosity, compressive strength and pH after 240 hrs curing time were 1.14, 54.4％, 39.5％, 54 kgf.cm$^{-2}$ and 7.1 respectively. The physical properties of fly ash-quick lime-burnt plaster system specimens were superior to FAJC systems. However, this composition we not suitable as a artificial culture media because of its high pH. In this study, it was shown that 90FA10JC10SD(90FA10JC ＋10％(w) sawdust) system exhibited the best physical properties.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3A
• /
• pp.215-225
• /
• 2011

In general, the precast columns can obtain its homogeneous quality as they are produced in a factory with a hollow concrete block type by using high strength concrete, so that they can generate the reduction of dead load. Such a method of precast hollow concrete columns is already implemented in USA and Japan and used for connecting between blocks which use PC tendons. However, it is inevitable to have uneconomical construction with excessive cost in early stage when PC tendons are used. This study aims to develop an economical precast column with high quality and constructability which consists of only splice sleeve and general reinforcing bar without using PC tendons in order to reduce the construction period and cost. To achieve this goal, this study tested the performance of total 5 minimized models in the experiment with the variables such as hollowness, diameter of main reinforcement bar and cross-sectional size for the cross section of precast column by using grouting type splice sleeve which is a new type joint rebar. And it also verified the performance of column in the experiment for a large-sized model in order to overview its applicability by excluding large scale effect.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.242-248
• /
• 2017

This study was conducted to develop a cylindrical paperpot manufacturing equipment which is capable of continuously producing paperpots with a constant size. The equipment consists of the soil supply part, the paper supply part, the pot manufacturing part, the paperpot cutting part and its process for manufacturing paperpot from the soil supply to the paperpot cutting is continuously performed. As a result of the performance test using this equipment, we suggest that the optimal moisture content and injection pressure to supply soil are 50%~60%, and 0.5 Mpa respectively. Moreover the appropriate temperature for adhesive strength is $150{\sim}160^{\circ}C$ taking into account the performance of device and adhesion time. Also, considering the cutting speed and safety, it is appropriate to adopt a straight blade having a clean plan at a minimum angle of $30^{\circ}$. In addition, the manufacturing capacity of the developed equipment was 3300 pots per hour.

• Korean Journal of Poultry Science
• /
• v.33 no.2
• /
• pp.121-126
• /
• 2006

This experiment was carried out to investigate the effects of medicinal plant by-products on productivity and egg quality in laying hens. A total of five hundred sixty laying hens was randomly distributed into 7 treatments with 4 replicates of 20 birds per replicate and fed com-soy based experimental diets containing 1.5% and 3.0% by-products of Cordyceps militaris, Artemisia capillaris and Curcuma aromatica S., respectively for 12 weeks. Egg production was not significantly different among treatments. Haugh unit was significantly increased in all treatments compared to control(p<0.05). There was no difference among the treatments in egg shell breaking strength, shell thickness, and yolk color. In conclusion, three medicinal by-products used in this experiment did not affect feed intake, egg production and showed positive effect on Haugh unit when they used $1.5{\sim}3.0%$ of feed.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.456-470
• /
• 2013

Hollow-fiber membranes, is one of the new technologies that is growing rapidly in the past few decades. In addition, separation membranes using polymer materials, have attracted attentions in various fields including gas separation, fuel cells, water treatment, wastewater treatment, and organic separation. Nanofiltration (NF) membranes having the separation characteristics in the intermediate range between ultrafiltration and reverse osmosis (RO) membranes for liquid separation, with relatively low investment cost and operating pressure lower than that of RO membranes, have high permeance and rejection performance of multivalent ions as well as organic compounds of molecular weight between $200{\sim}1000gmol^{-1}$. In this paper, we would like to review the research trends on the various structure control and characterization of NF hollow fiber membranes with respect to materials and the methods of preparation (phase inversion method and interfacial polymerization method). Currently, most of NF membranes have been manufactured by plate and frame types or spiral wound types. But hollow fiber types have delayed in commercial products, because of the weak strength when to produce on the basis of the existing materials, therefore the development of new materials or improvement of existing materials will be needed. If improving manufacturing technology is available, hollow fiber types will replace spiral wound types and gradually show a higher market share.

• Journal of Contemporary Eastern Asia
• /
• v.15 no.1
• /
• pp.41-63
• /
• 2016

Energy policy is known to have higher path dependency among policy fields (Kuper and van Soest, 2003; OECD, 2012; Kikkawa, 2013) and is a critical component of the infrastructure development undertaken in the early stages of nation building. Actor roles, such as those played by interest groups, are firmly formed, making it unlikely that institutional change can be implemented. In resource-challenged Japan, energy policy is an especially critical policy area for the Japanese government. In comparing energy policy making in Japan and Germany, Japan’s policy community is relatively firm (Hartwig et al., 2015), and it is improbable that institutional change can occur. The Japanese government’s approach to energy policy has shifted incrementally in the past half century, with the most recent being the 2012 implementation of the “Feed-In Tariff Law” (Act on Special Measures Concerning Procurement of Renewable Electric Energy by Operators of Electric Utilities), which encourages new investment in renewable electricity generation and promotes the use of renewable energy. Yet, who were the actors involved and the factors that influenced the establishment of this new law? This study attempts to assess the factors associated with implementing the law as well as the roles of the relevant major actors. In answering this question, we focus on identifying the policy networks among government, political parties, and interest groups, which suggests that success in persuading key economic groups could be a factor in promoting the law. Our data is based on the “Global Environmental Policy Network Survey 2012-2013 (GEPON2)” which was conducted immediately after the March 11, 2011 Great East Japan Earthquake with respondents including political parties, the government, interest groups, and civil society organizations. Our results suggest that the Feed in Tariff (FIT) Law’s network structure is similar to the information network and support network, and that the actors at the center of the network support the FIT Law. The strength of our research lays in our focus on political networks and their contributing mechanism to the law’s implementation through analysis of the political process. From an academic perspective, identifying the key actors and factors may be significant in explaining institutional change in policy areas with high path dependency. Close examination of this issue also has implications for a society that can promote renewable and sustainable energy resources.

• Journal of National Security and Military Science
• /
• s.7
• /
• pp.271-303
• /
• 2009

"Ubiquitous sensor network" definition is this-Someone attaches electro-magnetic tag everything which needs communication between man to man, man to material and material to material(Ubiquitous). By using attached every electro-magnetic tag, someone detects it's native information as well as environmental information such as temperature, humidity, pollution and infiltration information(Sensor). someone connects it realtime network and manage generated information(Network). 21st century's war is joint combined operation connecting with ground, sea and air smoothly in digitalized war field, and is systematic war provided realtime information from sensor to shooter. So, it needs dramatic development on watch reconnaissance, command and control, pinpoint strike etc. Ubiquitous computing and network technologies are essential in national defense to operate 21st century style war. It is possible to use many parts such as USN combined smart dust and sensor network to protect friend unit as well as to watch enemy's deep area by unmanned reconnaissance, wearable computer upgrading soldier's operational ability and combat power dramatically, RFID which can be used material management as well as on time support. Especially, unmanned watch system using USN is core part to transit network centric military service and to get national defense efficiency which overcome the dilemma of national defense person resource reducing, and upgrade guard quality level, and improve combat power by normalizing guardian's bio rhythm. According to the test result of sensor network unmanned watch system, it needs more effort and time to stabilize because of low USN technology maturity and using maturity. In the future, USN unmanned watch system project must be decided the application scope such as application area and starting point by evaluating technology maturity and using maturity. And when you decide application scope, you must consider not only short period goal as cost reduction, soldier decrease and guard power upgrade but also long period goal as advanced defense ability strength. You must build basic infra in advance such as light cable network, frequency allocation and power facility etc. First of all, it must get budget guarantee and driving force for USN unmanned watch system project related to defense policy. You must forwarded the USN project assuming posses of operation skill as procedure, system, standard, training in advance. Operational skill posses is come from step by step application strategy such as test phase, introduction phase, spread phase, stabilization phase and also repeated test application taking example project.