• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.63-74
• /
• 2006

During the construction of circular underground pipe, the non-proper compaction along the pipe and the decrease of compaction efficiency have been the main problems to induce the failure of underground pipe or facility. The use of CLSM (controlled low strength materials) should be one of the possible applications to overcome those problems. In this research, the full-scaled field test and the numeric analysis using PENTAGON-3D FEM program were carried out for three different cases on the change of backfill materials, including the common sand, the soil from construction site, and the CLSM. From the full-scaled test in field, the use of in-situ CLSM as backfill materials reduced the vertical and lateral deformation of the pipe, as well as the deformation of the ground surface. The main reason for reducing the deformation would be the characteristics of the CLSM, especially self-leveling and self-hardening properties. The measured earth pressure at the surround of the corrugated pipe using the CLSM backfills was the smaller than the other cases, and the absolute value was almost zero. Judging from the full-scaled field test and FEM analysis, the use of CLSM as backfill materials should be one of the best choices reducing the failure of the underground pipes.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_3
• /
• pp.821-834
• /
• 2017

The increase in the rate of industrialization due to urbanization has caused the Urban Heat Island phenomenon where the temperature of the city is higher than the surrounding area, and its intensity is increasing with climate change. Among the cities where heat island phenomenon occurs, Seoul city has different degree of urbanization, green area ratio, energy consumption, and population density in each administrative district, and as a result, the strength of heat island is also different. So It is necessary to analyze the difference of Urban Heat Island Intensity by administrative district and the cause. In this study, the UHI intensity of the administrative gu and the administrative dong were extracted from the Seoul metropolitan area and the differences among the administrative districts were examined. and linear regression analysis were conducted with The variables included in the three categories(weather condition, anthropogenic heat generation, and land use characteristics) to investigate the cause of the difference in heat UHI intensity in each administrative district. As a result of analysis, UHI Intensity was found to be different according to the characteristics of administrative gu, administrative dong, and surrounding environment. The difference in administrative dong was larger than gu unit, and the UHI Intensity of gu and the UHI Intensity distribution of dongs belonging to the gu were also different. Linear regression analysis showed that there was a difference in heat island development intensity according to the average wind speed, development degree, Soil Adjusted Vegetation Index (SAVI), Normalized Difference Built-up Index (NDBI) value. Among them, the SAVI and NDBI showed a difference in value up to the dong unit and The creation of a wind route environment for the mitigation of the heat island phenomenon is necessary for the administrative dong unit level. Therefore, it is considered that projects for mitigating heat island phenomenon such as land cover improvement plan, wind route improvement plan, and green wall surface plan for development area need to consider administrative dongs belonging to the gu rather than just considering the difference of administrative gu units. The results of this study are expected to provide the directions for urban thermal environment design and policy development in the future by deriving the necessity of analysis unit and the factors to be considered for the administrative city unit to mitigate the urban heat island phenomenon.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_3
• /
• pp.1109-1123
• /
• 2020

In South Korea with forest as a major land cover class (over 60% of the country), many wildfires occur every year. Wildfires weaken the shear strength of the soil, forming a layer of soil that is vulnerable to landslides. It is important to identify the severity of a wildfire as well as the burned area to sustainably manage the forest. Although satellite remote sensing has been widely used to map wildfire severity, it is often difficult to determine the severity using only the temporal change of satellite-derived indices such as Normalized Difference Vegetation Index (NDVI) and Normalized Burn Ratio (NBR). In this study, we proposed an approach for determining wildfire severity based on machine learning through the synergistic use of Sentinel-1A Synthetic Aperture Radar-C data and Sentinel-2A Multi Spectral Instrument data. Three wildfire cases-Samcheok in May 2017, Gangreung·Donghae in April 2019, and Gosung·Sokcho in April 2019-were used for developing wildfire severity mapping models with three machine learning algorithms (i.e., Random Forest, Logistic Regression, and Support Vector Machine). The results showed that the random forest model yielded the best performance, resulting in an overall accuracy of 82.3%. The cross-site validation to examine the spatiotemporal transferability of the machine learning models showed that the models were highly sensitive to temporal differences between the training and validation sites, especially in the early growing season. This implies that a more robust model with high spatiotemporal transferability can be developed when more wildfire cases with different seasons and areas are added in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6C
• /
• pp.648-658
• /
• 2003

As the usage of image/video contents increase, a security problem for the payed image data or the ones requiring confidentiality is raised. This paper proposed an image encryption methodology to hide the image information. The target data of it is the result from quantization in wavelet domain. This method encrypts only part of the image data rather than the whole data of the original image, in which three types of data selection methodologies were involved. First, by using the fact that the wavelet transform decomposes the original image into frequency sub-bands, only some of the frequency sub-bands were included in encryption to make the resulting image unrecognizable. In the data to represent each pixel, only MSBs were taken for encryption. Finally, pixels to be encrypted in a specific sub-band were selected randomly by using LFSR(Linear Feedback Shift Register). Part of the key for encryption was used for the seed value of LFSR and in selecting the parallel output bits of the LFSR for random selection so that the strength of encryption algorithm increased. The experiments have been performed with the proposed methods implemented in software for about 500 images, from which the result showed that only about 1/1000 amount of data to the original image can obtain the encryption effect not to recognize the original image. Consequently, we are sure that the proposed are efficient image encryption methods to acquire the high encryption effect with small amount of encryption. Also, in this paper, several encryption scheme according to the selection of the sub-bands and the number of bits from LFSR outputs for pixel selection have been proposed, and it has been shown that there exits a relation of trade-off between the execution time and the effect of the encryption. It means that the proposed methods can be selectively used according to the application areas. Also, because the proposed methods are performed in the application layer, they are expected to be a good solution for the end-to-end security problem, which is appearing as one of the important problems in the networks with both wired and wireless sections.

• Journal of the Korean Society of Radiology
• /
• v.14 no.1
• /
• pp.23-29
• /
• 2020

The standard uptake values (SUVs) strongly depend on positron emission tomographs (PETs) and image reconstruction methods. Various image reconstruction algorithms in GE Discovery MIDR (DMIDR) and Discovery Ste (DSte) installed at Department of Nuclear Medicine, Seoul Samsung Medical Center were applied to measure the SUVs in an anthropomorphic torso phantom. The measured SUVs in the heart, liver, and background were compared to the actual SUVs. Applied image reconstruction algorithms were VPFX-S (TOF+PSF), QCFX-S-350 (Q.Clear+TOF+PSF), QCFX-S-50, VPHD-S (OSEM+PSF) for DMIDR, and VUE Point (OSEM) and FORE-FBP for DSte. To reduce the radiation exposure to radiation technologists, only the small amount of radiation source ¹⁸F-FDG was mixed with the distilled water: 2.28 MBq in the 52.5 ml heart, 20.3 MBq in the 1,290 ml liver and 45.7 MBq for the 9,590 ml in the background region. SUV values in the heart with the algorithms of VPFX-S, QCFX-S-350, QCFX-S-50, VPHD-S, VUE Point, and FOR-FBP were 27.1, 28.0, 27.1, 26.5, 8.0, and 7.4 with the expected SUV of 5.9, and in the background 4.2, 4.1, 4.2, 4.1, 1.1, and 1.2 with the expected SUV of 0.8, respectively. Although the SUVs in each region were different for the six reconstruction algorithms in two PET/CTs, the SUV ratios between heart and background were found to be relatively consistent; 6.5, 6.8, 6.5, 6.5, 7.3, and 6.2 for the six reconstruction algorithms with the expected ratio of 7.8, respectively. Mean SNRs (Signal to Noise Ratios) in the heart were 8.3, 12.8, 8.3, 8.4, 17.2, and 16.6, respectively. In conclusion, the performance of PETs may be checked by using with the SUV ratios between two regions and a relatively small amount of radioactivity.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.12 no.1
• /
• pp.91-98
• /
• 2008

Purpose: Radio-isotopes (RI) use has been steadily developing due to industrial and technical development in the modern medical society. Particularly, popularization of domestic cyclotrons dramatically enable hospitals to produce and use diagnostic radio-isotopes. Generally, only specific facilities such as hospitals, research institutes, nuclear power plants and universities can use radio-isotopes, they are also responsible for ventilation system. The strength of radioactivity in the air is strongly regulated and controlled by korea atomic energy law in Korea Institue of Nuclear Safety (KINS), so that air radioactivity exposure can lead to environmental pollution surrounding places. In this study, we'd like to find out the investigation and the present condition of the controlled ventilation system in domestic hospitals by an emission standard from KINS, and try to reach an agreement about how to use the ventilation system. Result: Definition of filters, features and structures of pre-filters, hepa-filters, charcol filters, filter exchange procedures and precautions are explained. RI deflation concentration and filter exchange cycle have been presented as a standard prescribed in the rules of KINS. The Radiation Control Management System (RCMS) introduced by Seoul National University Bundang Hospital linking to digital pressure gauge with computer controller in another medical facilities were described in details. Conclusions: The system of medical facilities using RI has been remarkably developing in 21 century. Especially, radiation safety control system has also been grown rapidly into the subdivision, specialization, advanced technology along with international technical improvement. However, As far as current RI ventilation system is concerned, it has nothing better than doing in the past. Preferentially, to reinforce this, more sophisticated system with strict periodic filter exchange and exhaust air control guidance should be introduced by applying brilliant domestic information technology for RCMS and digital gauge method. From personal point of view as a radiation safety manager, I have provide with present problems and improvements. Futhermore, more improved guidance should be conducted.

• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.812-818
• /
• 2014

Raising seedlings is important for fruit crops and is especially significant for strawberries as it accounts for 80% of their cultivation. However, there are few studies on raising seedlings of strawberries by hydroponics. Since strawberries show clear differences in growth characteristics based on cultivar, it is necessary to develop suitable fertilizer formula, concentration and pH for each cultivar, and also to examine the amount of nutrient feeding appropriate for each medium type. A key to raising seedlings of strawberries by hydroponics is the development of strategies to manage the concentration of nutrient solution. The mother plants of 'Daewang' strawberries were planted on hydroponics benches filled with cocopeat on March 28, 2012. Three nutrient solution treatments were employed during the term of raising seedlings: a type that supplied EC $0.6dS{\cdot}m^{-1}$ nutrient solution for 30 days and only water for 20 days [0.6 (30) + 20]; a type that supplied EC $1.2dS{\cdot}m^{-1}$ nutrient solution for 30 days and only water for 20 days [1.2 (30) + 20]; and a type that supplied EC $1.2dS{\cdot}m^{-1}$ nutrient solution for 50 days [1.2 (50)]. The plants were then planted on hydroponics benches filled with cocopeat on September 20, and managed with EC $0.6-0.8dS{\cdot}m^{-1}$ strawberry nutrient solution developed by Yamazaki. After planting, shoot growth, flowering rate and fruit quality of the first cluster were investigated. The petiole length, leaf length, leaf width and crown diameter showed the highest grown in the [1.2 (50)] treatment, followed by [1.2 (30) + 20], and then [0.6 (30) + 20], indicating that the higher concentration of nutrient solution was preferable for raising seedlings. However, the growth differences among treatments gradually disappeared as growth continued, and the crown diameter especially grew to exhibit almost no difference at all among treatments. The point of flowering came first in [0.6 (30) + 20], followed by [1.2 (30) + 20] and then [1.2 (50)]. The [0.6 (30) + 20] treatment showed much earlier flowering than other treatments, which implies that low-concentration nutrient solution may be beneficial to the flowering of 'Daewang' strawberries while raising seedlings. There was no statistically significant difference among treatments in fruit length, fruit diameter and fruit firmness. Fruit weight in [1.2 (50)] treatment was significantly higher than other treatments. However, soluble solids of fruit was the lowest in [1.2 (50)] treatment. Together, the results of this experiment imply that it is better to supply EC $0.6dS{\cdot}m^{-1}$ solution for 30 days and then supply only water for 20 days to adequately manage concentration of nutrient solutions during the period of raising seedlings of strawberries by hydroponics.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.944-948
• /
• 1999

The morphological properties of four binary blends of polyethylene synthesized by metallocene catalyst(MCPE) and four polyolefins prepared by Ziegler-Natta catalyst have been investigated to interpret the effect of micro-molecular structure on the phase morphology and interfacial behavior; four binary blend systems studied are high density polyethylene(HDPE)-metallocene polyethylene (MCPE), polypropylene(PP)-MCPE, poly(propylene-co-ethylene) (CoPP)-MCPE, and poly(propylene-co-ethylene-co-1-butylene) (TerPP)-MCPE, and they are all phase separated. The HDPE-MCPE blend shows evenly growing homogeneous HDPE domain on the continuous MCPE phase, on the other hand, the rest of three blends show complex heterogeneous phase behavior. The PP-MCPE blend shows that PP and MCPE and completely phase separated and phase inversion takes place at 50% MCPE. The CoPP-MCPE and TerPP-MCPE show enhanced interface due to the same micro-molecular structure of ethylene, and phase inversion takes place at 40% MCPE. In particular, TerPP-MCPE blend shows improved phase morphology between interfaces, and this may be arisen from the comonomer contents in TerPP, which are 1-butene and ethylene having the same chemical structure as that of MCPE. The enhancement of the phase morphology in the TerPP-MCPE blend is correlated with the mechanical and morphological properties. Thus, although the four blend systems are phase separated, the phase morphology suggests that the order of interfacial adhesion strength be HDPE-MCPE > TerPP-MCPE > CoPP-MCPE > PP-MCPE and that micro-molecular structure between constituents be one of major factors giving enhanced interfacial adhesion.

• Journal of Life Science
• /
• v.26 no.12
• /
• pp.1376-1382
• /
• 2016

Xylitol is widely used in the food and medical industry. It is produced by the reduction of xylose (lignocellulosic biomass) in the Saccharomyces cerevisiae strain, which is considered genetically safe. In this study, the expression system of the GRE3 (YHR104W) gene that encodes xylose reductase was constructed to efficiently produce xylitol in the S. cerevisiae strain, and the secretory production of xylose reductase was investigated. To select a suitable promoter for the expression of the GRE3 gene, pGMF-GRE3 and pAMF-GRE3 plasmid with GAL10 promoter and ADH1 promoter, respectively, were constructed. The mating factor ${\alpha}$ ($MF{\alpha}$) signal sequence was also connected to each promoter for secretory production. Each plasmid was transformed into S. cerevisiae $SEY2102{\Delta}trp1$, and $SEY2102{\Delta}trp1$/pGMF- GRE3 and $SEY2102{\Delta}trp1$/pAMF-GRE3 transformants were selected. In the $SEY2102{\Delta}trp1$/pGMF-GRE3 strain, the total activity of xylose reductase reached 0.34 unit/mg-protein when NADPH was used as a cofactor; this activity was 1.5 fold higher than that in $SEY2102{\Delta}trp1$/pAMF-GRE3 with ADH1 as the promoter. The secretion efficiency was 91% in both strains, indicating that most of the recombinant xylose reductase was efficiently secreted in the extracellular fraction. In a baffled flask culture of the $SEY2102{\Delta}trp1$/pGMF-GRE3 strain, 12.1 g/l of xylitol was produced from 20 g/l of xylose, and ~83% of the consumed xylose was reduced to xylitol.

• Journal of Fashion Business
• /
• v.1 no.1
• /
• pp.71-83
• /
• 1997

The purpose of this study is to analyze the present fashion phenomenon by considering the types of street fashion, the center of avant-grade modern fashion, that shows the origination background and special feature concretely. The times was defined through the 1980's from World War II that street style originated, so the range of study was the 1990's when the street style was influenced by that of the past and was revived. The ways of study were to analyze the records of ideology, art and music connected with the street style from World War II to the present when it has risen. The summary of result is as follows. (1) In the 1940's, Zooties was the jet of desire suppressed by African-Americans that couldn't receive favors socially and economically and Hipsters pursued reformative bebop that made up of soft Jazz. In the 1950's, Modernists were running after Cool Jazz to the minimum. In the 1970's, Funk appered in the sexual desire and erotic strength, and was surfaced from Negro Getto. In the 1980's B-boys & Flygirls showed the street style by the scribble art of slum in the New York. As mentioned above, In the 1990's, Acid Jazz influenced by the Jazz of Negro has been the fashion added to the tradition of musical form that come from eclecticism of Jazz tended Neo-Jazz. (2) In the 1940's, Western style dreamed the country life because of rapid urbanization. In the 1950's, Beat obtained the feeling of liberation from the dissolute life and activity. In the 1960's, Psychedelics showed the freedom affected by the Pop-art and Op-art, and Hippies pursued the true individuality as 'love & peace' life style and the return to nature. In the 1990's, Grunge look influenced by the above has been fashion that shows the practical use of second-hand clothing or patchwork contrary to elitism. (3) In the 1940's, Caribbean style appered in the typical textile color with the center of West Indies. In the 1960's, Rude boys showed the magnificence and difficulty of Jamaica, and Rastafarians had a tendency to come back to the ancient civilization of America. In the 1970's, Two-tone was the simple clothing for harmonizing among human races. In the 1990's, Jamaica look influenced by the above has been the Lege fashion introduced to a high fashion, appearing in the special bright color, applique, unique hair style, and so on. (4) In the 1950's, Sufers pursued natural rhythm, getting out of everything. In the 1970' s, Skaters enjoyed the speed on the paved road. In the 1980's, Casuals emphasized the spirit of cooperation of young-things. In the 1990's, Casual look Influenced by the above has been the fashion that forms the activity, function and strong spirit of cooperation by pursuing comfortable life and sports in the tension of life and variety of modern society. (5) It was hard for Bikers to adjust themselves in society after the war. In the 1950's, Coffee bar cowboys were the reckless running boys in the leather jacket. In the 1960's, Rockers created the group originality as disobedient outsiders and Greasers imitated Rolling Stones. In the 1980's, Punks resisted the viewpoint of the old generation in offensive fashion. In the 1990's, Cyberpunk influenced by the above has pursued the classless structure, electronic music and metallic clothing that forebodes gloomily as the computer generation of ultra-modern science times. Accordingly, in understanding a complex modern fashion phenomenon, it was analyzed that the street styles of the past, from World War II to the 1980's, were reflected in that of the 1990's dividing into the five types in a word, namely Acid Jazz, Grunge look, Jamaica look, Casual look and Cyberpunk.