• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.583-587
• /
• 2008

수도권에 거주하는 60세 이상 589명을 대상으로 설문조사를 실시하여 고령자의 하천이용행태 및 하천이용의 영향요인을 분석하였다. 조사결과, 하천으로 이동하는데 가장 큰 불편사항은 경사로, 계단, 경계턱 등의 교통장애물이며, 이용에 불편한 하천시설은 화장실과 휴식공간으로 나타났다. 기대하는 하천복원의 형태는 인위적인 시설을 제한하는 친자연형 또는 자연형 하천에 대한 선호도가 높은 것으로 나타났다. 고령자의 하천이용 영향요인 모형추정결과, 고령자의 성별, 배우자 유무, 하천으로의 이동시간, 방문시점, 이용 교통편의 요인이 하천이용횟수에 영향을 미치는 것으로 분석되었다. 따라서 향후 고령자의 하천이용의 접근성 및 친수성을 향상하기 위해 장애물을 최소화하고, 교통 연계성을 향상시켜야 할 것이다. 또한, 고령자는 편의시설에 대한 요구와 동시에, 하천의 생태적 요소도 선호하는 것으로 분석되므로, 하천복원 시 적정 편의시설에 대해 고려하되, 가능한 환경적으로 설계될 수 있다면 다양한 고령자의 기대를 만족시킬 수 있을 것이다.

• Journal of Environmental Science International
• /
• v.5 no.6
• /
• pp.785-799
• /
• 1996

The incineration tests of mixed industrial wastes using the stoker type incinerator are carried out to investigate the partitioning characteristics of heavy metals during incineration. The results obtained from this study are as follow. The partitioning characteristics of heavy metals throughout this incinerator are found that, at given condition of $700^{\circ}C$, the elements with the relatively high boiling point such as Cr, Cu and Pb are partitioned into a bottom ash, a fry ash captured tv cyclone, and a flue gas stream, 67~88%, 2~19% and 6~16% of initial amount entering the incinerator, respectively, but the Cd and Hg of 75~81% is vaporized into the flue gas. It appears that the partitioning characteristics according to the particle size of ash is different between the bottom ash and the fly ash. For bottom ash, the fraction of partitioning into 75${\mu}{\textrm}{m}$ oversized particles is reatively high. For fly ash, the characteristics of distributions with the particle size can not be clearly shown.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.565-568
• /
• 2006

This paper achieved dynamic characteristics with test to use solenoid valve for flight model that have present. Designed pressure control virtual system which PWM solenoid valve to use test result. Examination compared solenoid valve dynamic characteristics in atmosphere and cryogenic fluid and presented technique and valuation method that measured upstream and down stream pressure of solenoid valve, as well as, temperature, excitation voltage etc. These test results could confirm solenoid valve response time and maximum using frequency characteristic at use in atmosphere and cryogenic temperature and this derived design variables pressure control system from those bases.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.7
• /
• pp.1-16
• /
• 1994

In this paper, we propose a new multiple access scheme for VSAT(Very Small Aperture Terminal) data communications. The proposed scheme has better performance in terms of delay throughput than Controlled Multiaccess Scheme which has excellent performance. The proposed scheme use the spare reservation method, adaptation method to offered load, and fixed bandwidth reservation method. In this paper, we analyze the performance using simple queueing model and present the simulation results. When network traffic is very low, the new scheme and the controlled multiaccess scheme have almost the same access delay characteristic. As the network load becomes higher, the new scheme's access delay gain becomes larger. Futhermore, even when the network traffic is very high it is possible to access satellite link within the delay similar to one round-trip delay. In addition to access delay performance enhancement, the new scheme has facility that supports fixed bandwidth reservation. So it shows more enhanced performance in the environment that stream traffic is dominant such as in VSAT communication environment.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.498-501
• /
• 2012

A methodology to evaluate the performance analysis for micro hydropower sites has been studied. It consists of two main parts; flow duration function which can describe micro hydropower sites and performance analysis to estimate the output characteristics of micro hydropower plants. The output performance characteristics for Magok stream was analyzed, using developed model. Also, primary design specifications such as design flowrate, installed capacity, operational rate and annual electricity production were estimated and dicussed. Additionally, it was found that the developed model in this study is useful tool to estimate feasibility assessment for micro hydropower sites.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.138-143
• /
• 2005

In this study, the cross-wind stability of the G7 train and TTX running under the high speed was investigated by using 2-dimensional Reynolds Averaged Navier-Stokes equations. It is very important to analysis the aerodynamic characteristic of bluff body located near a ground at the field of the aeronautical, wind engineering, ground vehicle system. To the point of running stability, it is meaningful to analysis the cross-wind effect to the G7 train and TTX developed by domestic technology. The aerodynamic characteristics of the G7 train equipped by bogie-cover is more superior to the case without bogie-cover. Also 2nd model of TTX has stream-shape body has the more good performance than 1st model of TTX.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.841-846
• /
• 2009

Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle-installed downstream of the high pressure turbine extraction stream line inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. This paper describes operation of experience and numerical analysis composed similar condition with real high pressure feedwater heater. This study applied several impingement baffle plates to feedwater heater same as previous study. In addition, it shows difference of pressure distribution and value between single phase and two phase based on experience and numerical analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.811-816
• /
• 2000

It has been long suspected that the transition region may give rise to local pressure fluctuations and radiated sound that are different from those created by the fully-developed turbulent boundary layer at equivalent Reynolds number. Experimental investigation described in this paper concerns the characteristics of pressure fluctuations at the transition. Flush-mounted microphones and hot wires are used to measure the pressure fluctuations and local flow velocities within the boudary layer in the low noise wind tunnel. From this experimental we could observe the spatial and temporal development process of T-S wave using Wigner-Ville method and found the possibility of relation between the characteristic frequency of T-S wave and free stream velocity and the boundary layer thickness based on nondimensional pressure spectra scaled on outer variables.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.691-696
• /
• 2000

Cooling characteristics of cooling jacket for spindle system with built-in motor are studied. Three dimensional model was selected for the analysis of the helical-type cooling jacket. This model includes the estimation on the amount of heat generation from bearing and built-in motor and the thermal characteristic values such as heat flux on the boundary. The temperature distributions are analyzed and the cooling by Nusselt number and total heat transfer coefficient. Numerical results show that stream-wise cross section area and flow rate are important factors for cooling characteristics of cooling jacket.

• Journal of Mechanical Science and Technology
• /
• v.20 no.11
• /
• pp.1942-1949
• /
• 2006

Typically, condensate forms as droplets on the fin surfaces and may bridge the space between the fin surfaces. This is due to the dry characteristics inherent to the fin surface. The droplets increase the air-side pressure drop. In the case of high air velocities, these droplets may be blown off the fins and entrained in the air stream. To minimize the formation of condensate droplet, the wet ability of the fins must be improved. The carry-over velocity is affected by fin surface characteristics. To avoid carry-over in the air conditioner having the highest air velocity of 1.5 m/sec, the dynamic contact angle (DCA) should be at least lowly under $60^{\circ}$.