• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.636-643
• /
• 2024

The coolability of the debris bed with a simulant of solidified corium is experimentally studied, focusing on the effects of the structure of the axial stratified debris bed on the dryout heat flux (DHF). DHF was obtained for the four structures with different particle sizes for the axial stratified debris bed under top flooding. The experimental results show that the dryout position of the axial stratified debris bed is formed at the stratified interface indicated by the temperature rise, and the DHF of the axial stratified bed is much lower than that of the homogeneous bed packed with the upper small particles. To predict the dryout heat flux of the stratified debris beds, by considering the properties of the mixed area, a one-dimensional dryout heat flux model of the porous medium is derived from a water and vapor momentum equation for porous medium, two-phase permeability modifications, interfacial drag, and the correlation between capillary pressure and liquid saturation and verified with the experimental data. The modified model can give reasonable results under different structures.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.8
• /
• pp.672-679
• /
• 2007

The combustion characteristics of a liquefied petroleum gas-di-methyl ether (LPG-DME) compression ignition engine was investigated under homogeneous charge and stratified charge conditions. LPG was used as the main fuel and injected into the combustion chamber directly. DME was used as an ignition promoter and injected into the intake port. Different LPG injection timings were tested to verify the combustion characteristics of the LPG-DME compression ignition engine. The combustion was divided into three region which are homogeneous charge, stratified charge, and diffusion flame region according to the injection timing of LPG. The hydrocarbon emission of stratified charge combustion was lower than that of homogeneous charge combustion. However, the carbon monoxide and nitrogen oxide emission of stratified charge combustion were slightly higher than those of the homogeneous charge region. The indicated mean effective pressure was reduced at stratified charge region, while it was almost same level as the homogeneous charge combustion region at diffusion combustion region. The start of combustion timing of the stratified charge combustion and diffusion combustion region were advanced compared to the homogeneous charge combustion. It attributed to the higher cetane number and mixture temperature distribution which locally stratified. However, the knock intensity was varied as the homogeneity of charge was increased.

• Nuclear Engineering and Technology
• /
• v.51 no.1
• /
• pp.95-103
• /
• 2019

Vapor explosions can be classified in terms of modes of contact between the hot molten fuel and the coolant, since different contact modes may affect fuel-coolant mixing and subsequent vapor explosion energetics. It is generally accepted that most vapor explosion phenomena fall into three different modes of contact; fuel pouring into coolant, coolant injection into fuel and stratified fuel-coolant layers. In this study, we review previous stratified steam explosion experiments as well as recent experiments performed at the KTH in Sweden. While experiments with prototypic reactor materials are minimal, we do note that generally the energetics is limited for the stratified mode of contact. When the fuel mass involved in a steam explosion in a stratified geometry is compared to a pool geometry based on geometrical aspects, one can conclude that there is a very limited set of conditions (when melt jet diameter is small) under which a steam explosion is more energetic in a stratified geometry. However, under these limited conditions the absolute energetic explosion output would still be small because the total fuel mass involved would be limited.

• 한국연소학회:학술대회논문집
• /
• 2013.06a
• /
• pp.73-76
• /
• 2013

The inert gas dilution effect for the stability of a stratified propane premixed flame has been experimentally studied. The addition of inert gases to a stratified premixed flame, which used to be very stable without dilution, makes a flame unstable. The lower equivalence ratio on the outer premixed flame and the lower fuel flow rate through the inner nozzle were observed to be the more stable conditions for the stratified premixed flame with nitrogen or argon dilution. It has been interpreted with the flame structure change such as shift of stoichiometric ratio region in a flame.

• Journal of the Korean Statistical Society
• /
• v.28 no.2
• /
• pp.135-150
• /
• 1999

Latin hypercube sampling(LHS) introduced by McKay et al. (1979) is a widely used method for Monte Carlo integration. Stratified Latin hypercube sampling(SLHS) proposed by Choi and Lee(1993) improves LHS by combining it with stratified sampling. In this article it is shown that SLHS yields an asymptotically more accurate than both stratified sampling and LHS.

• Journal of ILASS-Korea
• /
• v.5 no.2
• /
• pp.28-34
• /
• 2000

To reduce the soot and NOx simultaneously, a new system of stratified injection is developed. This system discharges stratified diesel-methanol in a D. I. Diesel Engine. Nozzle and delivery valve of conventional injection system were remodeled to inject diesel and methanol from one injector sequently. The quantity of diesel and methanol was controled precisely by micrometers mounted on the injection control lack. The real injection ratio of dual fuel was measured by volumetric ratio. We could confirm the capabilities that soot and NOx simultaneously were reduced by diesel-methanol stratified injection from the results of in-cylinder pressure data obtained from combustion experiment by stratified injection, heat release rate and mass fraction bumed.

• Communications for Statistical Applications and Methods
• /
• v.19 no.6
• /
• pp.751-759
• /
• 2012

This paper proposes an alternative stratified randomized response model based on the model of Singh and Joarder (1997). It is shown numerically that the proposed stratified randomized response model is more efficient than Hong et al. (1994) (under proportional allocation) and Kim and Warde (2004) (under optimum allocation).

• Communications for Statistical Applications and Methods
• /
• v.6 no.3
• /
• pp.755-760
• /
• 1999

In multivariate stratified sampling surveys it is general to use a few stratification variables which are highly correlated with the important variables at design stage. But there might be some secondary study variables which are not so highly correlated with those stratification variables. In that case it is not efficient to use the same type of estimator due to the secondary variables as the one base on the important variables. A post-stratified estimation is proposed to increase the efficiency of the estimator with existence of secondary variables. The proposed method is illustrated with a set of fishery household population survey data.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.4
• /
• pp.339-345
• /
• 2008

The stratified flow can be seen in the oil and gas pipelines as well as pipelines related to ship's fluid machineries. Numerous theories and correlations have also been proposed in the past for the prediction of stratified flow in horizontal or slightly inclined pipe. The previous researches are mostly about the effects of physical properties, viscosity, phases densities and pipe geometries on the stratified flow. Very few study outcomes exist on the effect of gravity magnitude and large slop angle of pipe inclinations on the occurring condition of stratified flow. In this study, therefore, analytical procedures were conducted about the effect of both the change in the gravity magnitude and pipe inclinations on the stratified flow occurring conditions. From the analytical results, it was found that stratified flow occurred at the vertical upward inclination and at very low liquid phase flowrates in 0.17g and 0.33g conditions.

• Journal of Ginseng Research
• /
• v.32 no.2
• /
• pp.155-160
• /
• 2008

The North American ginseng (Panax quinquefolius L.) seed crop varies from year to year. The ability to hold stratified seed for a year would ensure continuity of seed supply and no interruption in production cycles. Seed drying and rehydration protocols at room temperature $(21{\pm}2^{\circ}C)$ were developed. These protocols and seed storage at 4 ${\pm}1^{\circ}C$ and 35%, or variable, relative humidity (RH) allowed the holding of stratified seed for one year and then establishment of the following five treatments in field plots: Trt.1 : dried 2005 stratified seed (seed harvested Fall 2004) held at $4^{\circ}C$ and at variable humidity; Trt.2 : 2006 stratified seed planted directly into the field; Trt.3 : 2005 stratified seed dried in October 2005 and held at $4^{\circ}C$ and 35% RH ; Trt.4 : 2005 stratified seed held in moist sand from October to December 2005 at room temperature $(21{\pm}2^{\circ}C)$ and then in December dried and held at $4^{\circ}C$ and 35 % RH; Trt.5 : 2005 stratified seed held in moist sand from October to December 2005 at room temperature and then in December dried and held at $-12^{\circ}C$ Seedling emergence was best in Trts. 2 and 4 with 67.3 and 65.1% respectively which is similar to the industry expected rate of 68% after regular stratification. Seedling growth was similar in Trts. 2 and 4 with root dry weights of 172 and 159 mg respectively in mid-August. Therefore, if holding stratified seed in August/September for one year is desired, the seed can be placed in moist sand until December and then dried and stored at $4^{\circ}C$ and 35% RH. These seed can be planted in the following August/September and will germinate and grow in the following year to give an acceptable crop.