• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.753-756
• /
• 2005

Rapid prototyping (RP) technologies are mainly performed by layered manufacturing (LM) process which manufactures 3D physical objects by depositing 2D sections in a direction. Thus, deformations are apt to occur in overhanging area of the RP processed part. Also, excessive adhesion between part and platform of the RP apparatus is generated. In order to prevent these problems, most of the RP technologies adopt support structure. Main element to support a part in the support structure is strand. In actual field, however, the number of strand is determined by the software operating reference guide or RP system operator's experience. In this paper, a methodology to determine the optimal strand spacing is presented through experiments and measurements for the SL part deformation by change of strand spacing and part weight in the support structure of the stereolithography.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1243-1249
• /
• 2010

Ground anchors can be good solution in large and deep excavation. Anchored supports generally provide larger workspace than strut supports and good performances. The major benefit provided by these anchored systems was the open excavation area created by eliminating horizontal or raked struts, which generally inhibit rapid construction within the site area. In loose soils, however, anchors are sometimes hard to get high pullout anchor capacity, so that the spacing of anchor both horizontally and vertically is frequently controlled, in which the construction costs of anchors are increased. In order to increase anchor capacity, therefore, conceptual introduction of the multi-strand anchor is presented in this paper. Also, this study shows an numerical study of predicting the load transfer of the multi-strand anchor and a beam-column analysis was performed by a Elastic-Plastic beam theory.

• Advances in Computational Design
• /
• 제4권3호
• /
• pp.251-272
• /
• 2019

This study performed lateral load testing on seventeen wood wall frames in two sections. Section one included eight tests studying structural foam sheathing of shear walls subjected to monotonic loads following the ASTM E564 test method. In this section, the wood frame was sheathed with four different types of structural foam sheathing on one side and gypsum wallboard (GWB) on the opposite side of the wall frame, with Simpson HDQ8 hold down anchors at the terminal studs. Section two included nine tests studying wall constructed with oriented strand board (OSB) only on one side of the wall frame subjected to gradually applied monotonic loads. Three of the OSB walls were tied to the baseplate with Simpson LSTA 9 tie on each stud. From the test results for Section one; the monotonic tests showed an 11 to 27 percent reduction in capacity from the published design values and for Section two; doubling baseplates, reducing anchor bolt spacing, using bearing plate washers and LSTA 9 ties effectively improved the OSB wall capacity. In comparison of sections one and two, it is expected the walls with structural foam sheathing without hold downs and GWB have a lower wall capacity as hold down and GWB improved the capacity.

• Molecules and Cells
• /
• 제41권2호
• /
• pp.127-133
• /
• 2018

Chromatin remodeling factors are involved in many cellular processes such as transcription, replication, and DNA damage response by regulating chromatin structure. As one of chromatin remodeling factors, remodeling and spacing factor 1 (RSF1) is recruited at double strand break (DSB) sites and regulates ataxia telangiectasia mutated (ATM) -dependent checkpoint pathway upon DNA damage for the efficient repair. RSF1 is overexpressed in a variety of cancers, but regulation of RSF1 levels remains largely unknown. Here, we showed that protein levels of RSF1 chromatin remodeler are temporally upregulated in response to different DNA damage agents without changing the RSF1 mRNA level. In the absence of SNF2h, a binding partner of RSF1, the RSF1 protein level was significantly diminished. Intriguingly, the level of RSF1-3SA mutant lacking ATM-mediated phosphorylation sites significantly increased, and upregulation of RSF1 levels under DNA damage was not observed in cells overexpressing ATM kinase. Furthermore, failure in the regulation of RSF1 level caused a significant reduction in DNA repair, whereas reconstitution of RSF1, but not of RSF1-3SA mutants, restored DSB repair. Our findings reveal that temporal regulation of RSF1 levels at its post-translational modification by SNF2h and ATM is essential for efficient DNA repair.

• 대한토목학회논문집
• /
• 제36권6호
• /
• pp.999-1010
• /
• 2016

최근 국내에서는 고강도 강연선이 실구조물에 적용되는 사례가 늘어나고 있다. 이 연구에서는 LNG 저장탱크에 통상적으로 적용되는 1,860 MPa급 강연선을 2,400 MPa급 고강도 강연선으로 대체할 때 쉬스 배치 간격 증가에 따른 구조적인 영향을 고찰해 보았다. 먼저, LNG 탱크의 원통형 벽체를 모사하는 유한요소모델에 원환텐던 및 수직텐던의 프리스트레싱 효과를 등가하중으로 가하되 프리스트레싱 효과의 총합은 일정한 상태에서 텐던의 간격 및 긴장력을 조절한 결과, 고강도 강연선을 적용해도 설계 시 요구되는 소정의 응력 분포를 구현할 수 있는 것으로 나타났다. 또한, LNG 탱크 벽체 일부분을 모사하는 실대형 실험체를 제작하고 15.2 mm 직경 고강도 강연선이 31개 삽입된 쉬스를 2개 배치하여 매우 높은 수준의 프리스트레싱 힘이 콘크리트에 적절히 전달되는지 관찰하였다. 한편, 세계 최대 용량인 270,000 kl급 LNG 탱크의 유한요소모델을 구축하고 고강도 강연선을 적용했을 때의 프리스트레싱 효과를 일반 강연선의 경우와 비교하였으며, LNG 누출 사고 시에도 여유압축응력 및 여유압축구간과 같은 수밀성 규정을 만족함을 확인하였다. 이 연구결과는 2,400 MPa급 고강도 강연선이 실제 LNG 탱크에 적용될 때 유용하게 활용될 것으로 기대된다.