• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The Korea-Japan Plastics Processing Joint Seminar
• /
• pp.1-6
• /
• 2003

In injection molding of an optical disk, a toric lens, etc., their performance depends on the transcription preciseness of fine surface structure of a mold. However, transcription behavior has not been made clear yet, because transcription is made in very short time and the structure is very small. In this paper, transcription properties have been examined, by using V-grooves of various sizes. machined on mold surfaces, and the following results are obtained. (1) Transcription properties have been made clear experimentally and it was found that the mold temperature $T_D$ makes great influence on the transcription property and that compression applying time $t_c$ should be taken more than 2.0s for fine transcription. (2) A mechanical model of transcription process, in consideration with strain recovery due to viscoelastic property of polymer. is proposed. (3) Simulation results agree with experimental ones fairly well. It means that the transcription model is useful for estimation of transcription property in advance of an actual. injection molding.

• 한국미생물·생명공학회지
• /
• 제9권2호
• /
• pp.91-97
• /
• 1981

고온균중에서 amylase의 생산능이 우수한 Bacillus sp. Y-127을 토양에서 분리, 선정하고 다음과 같은 실험결과를 얻었다. 1. Amylase 생산의 최적배양조건은 nutrient broth 0.8% (w/v), soluble starch 2 % (w/v), urea 0.2 % (w/v, N기준), MgSO$_4$.7$H_2O$ 0.02 % (w/v, Mg기준), $K_2$HPO$_4$ 0.02 % (w/v, P기준), yeast extract 0.2 % (w/v), 6$0^{\circ}C$, pH7.0이었다. 2. Amylase를 (NH$_4$)$_2$SO$_4$침전, 투석, Sephadex G-150 column chromatography 및 Sephadex G-150 column rechromatography를 통해 정제한 결과 123배의 비활성 증가를 볼 수 있었다. 3. Amylase의 pH 안정성은 pH 4.0에서 7.0 사이였으며, 온도에 따른 효소의 불활성도는 온도가 증가함에 따라 증대되었다.

• 대한족부족관절학회지
• /
• 제19권3호
• /
• pp.81-85
• /
• 2015

Acute sprain of the ankle requires comprehensive history taking and physical examination in diagnosing the type of severity and deciding on the plan of treatment. Literature supports functional treatment as the treatment of choice for grade I and II injuries. During the acute phase, the goal of treatment focuses on controlling pain and swelling. PRICE (protection, rest, ice, compression, and elevation) is a well-established protocol at this phase. There is some evidence that application of ice and use of nonsteroidal anti-inflammatory drugs improves healing and speeds recovery. Then the functional treatment (motion restoration and strengthening exercises) is administered to progress the rehabilitation appropriately in order to facilitate healing and restore the mechanical strength and proprioception. Early mobilization has been shown to result in more rapid return to work and daily activities than immobilization. Grade III injuries still generate controversy in terms of the best management available, and more studies on early mobilization, cast immobilization, or surgery are needed. Even the Cochrane reviews published to date are not conclusive.

• Journal of Microbiology and Biotechnology
• /
• 제14권3호
• /
• pp.466-469
• /
• 2004

The recombinant bioluminescent Escherichia coli strains, DPD2511 and TV 1061 containing the katG and grpE promoters, respectively, from Vibrio fischeri fused to luxCDABE, were used to detect the adaptive and repair responses to oxidative damage caused by hydrogen peroxide $(H_2O_2)$, and protein damage due to phenol. The response ratio, represented as the bioluminescence induced in subsequent inductions of DPD2511 and TV1061 with the mother cells previously induced by each chemical, i.e., $H_2O_2$ and phenol during the previous induction stage, decreased suddenly compared with the ratio of the control culture of each strain, meaning there is a possible adaptive response to stress caused by chemicals. Protein damage due to phenol was completely repaired by the second culturing after the initial induction, as was oxidative damage caused by $H_2O_2$ which was also rapidly repaired, as detected by the recovery of bioluminescence level. This result suggests that E. coli promptly adapt and repair oxidative and protein damage by $H_2O_2$ and phenol completely.

• Geomechanics and Engineering
• /
• 제14권5호
• /
• pp.459-466
• /
• 2018

By conducting uniaxial loading cycle tests on the coal rock with outburst proneness, the dilatation characteristics at different loading rates were investigated. Under uniaxial loading and unloading, the lateral deformation of coal rock increased obviously before failure, leading to coal dilatation. Moreover, the post-unloading recovery of the lateral deformation was rather small, suggesting the onset of an accelerated failure. As the loading rate increased further, the ratio of the stress at the dilatation critical point to peak-intensity increased gradually, and the pre-peak volumetric deformation decreased with more severe post-peak damage. Based on the laboratory test results, the lateral deformation of the coals at different depths in the #1302 isolated coal pillars, Yangcheng Coal Mine, was monitored using wall rock displacement meter. The field monitoring result indicates that the coal lateral displacement went through various distinct stages: the lateral displacement of the coals at the depth of 2-6 m went through an "initial increase-stabilize-step up-plateau" series. When the coal wall of the working face was 24-18 m away from the measuring point, the coals in this region entered the accelerated failure stage; as the working face continued advancing, the lateral displacement of the coals at the depth over 6 m increased steadily, i.e., the coals in this region were in the stable failure stage.

• 한국미생물·생명공학회지
• /
• 제8권2호
• /
• pp.125-133
• /
• 1980

토양으로부터 분리한 포도당 이성화효소를 강하게 생산하는 방사균을 Bergey's manual 8판에 따라 동정한 결과 Streptomyces antibioticus 근록의 균주이었다. 본 균의 배양액으로부터 균체를 모아서 해사를 넣고 파쇄 하여 증류수로 추출하고 Mn-처리를 하여 핵단백질을 제거한 후 황산 ammonia 분획침전(0.5∼0.8포화), 수석, DEAE-cellulose column chromatography, DEAE-sephadex (A-50) column chromatography 및 sephadex G-200에 의한 gel filtration을 거쳐 비활성도로 약 380배, 회수율 25％ 정도로 분리 정제하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.475-478
• /
• 1995

The variations of cold gas properties such as density, pressure, temperature and velocity which are dependent each other are closely related with the dielectric recovery of an interrupter. So, the pressure-rises at no-load in the puffer cylinder and in front of fixed arcing contact of 800kV model interrupter were measured experimentally using pressure transducers of strain gage type and semiconducting type, respectively. The maximum value of pressure-rise in the puffer cylinder increased almost linearly from 7.6 bar at the minimum operated pressure to 9.7 bar at the maximum operated pressure, while the pressure-rise in front of fixed arcing contact was independent with the operated pressure. The measured values will be utilized in verifying the self-developed cold flow analysis program and as an input of commercialized CFD program package.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.229.1-229.1
• /
• 2014

Tactile sensors have widely been researched in the areas of electronics, robotic system and medical tools for extending to the form of bio inspired devices that generate feeling of touch mimicking those of humans. Recent efforts in adapting the tactile sensor have included the use of novel materials with both scalability and high sensitivity [1]. Graphene, a 2-D allotrope of carbon, is a prospective candidate for sensor technology, having strong mechanical properties [2] and flexibility, including recovery from mechanical stress. In addition, its truly 2-D nature allows the formation of continuous films that are intrinsically useful for realizing sensing functions. However, very few investigations have been carrier out to investigate sensing characteristics as a device form with the graphene subjected to strain/stress and pressure effects. In this study, we present a sensor of vertical forces based on single-layer graphene, with a working range that corresponds to the pressure of a gentle touch that can be perceived by humans. In spite of the low gauge factor that arises from the intrinsic electromechanical character of single-layer graphene, we achieve a resistance variation of about 30% in response to an applied vertical pressure of 5 kPa by introducing a pressure-amplifying structure in the sensor. In addition, we demonstrate a method to enhance the sensitivity of the sensor by applying resistive single-layer graphene.

• Journal of Chest Surgery
• /
• 제22권6호
• /
• pp.927-935
• /
• 1989

Using an isolated Rat heart preparation of the Sprague Dawley strain, the YUMC cardioplegic solution k the St. Thomas Hospital Cardioplegic Solution were compared in the non waking K working heart perfusion systems by evaluating the hemodynamics, [bio] chemical, and light microscopic finding The heart rate k coronary flow of the two groups in the 20 minutes post ischemic recovery time were 288.6*6.5 vs 283.7*12 and 21.3*1.0 vs 19.0*1.7 respectively with no statistical significance existing. However the aortic systolic pressure, aortic overflow, cardiac output which were 81.7[4.2 vs 78.4*1.8, 18.3*1.1 vs 13.0*2.5 and 36.9*0.9 vs 32.0*3.2 respectively with P < 0.01 indicate that the comparison of these three parameters is statistically meaningful. The amount of CPK extracted in the 20 minutes post 120 minutes of ischemia was compared for the two cardioplegic solution, the results of which turned out to be similar, light microscopic findings were also found to be similar. It is thought that the YUMC cardioplegic solution provided better results than the St. Thomas hospital solution because of the differing composition of the two solution such as glucose, mannitol, albumin were put only in the former solution enhancing osmolarity of the cardioplegic solution providing better hemodynamic results.

• Journal of Welding and Joining
• /
• 제2권1호
• /
• pp.49-57
• /
• 1984

The influence of weld defect, residual stress and microstructure on the Low Cycle Fatigue(L. C. F.) behaviour of AISI 304L austenitic stainless steel weldment has been studied. The specimens were welded by shielded metal are welding process, post weld heat treated(PWHT) at 900.deg.C for 1.5hrs, and tested under total strain controlled condition at room temperature. The results of the experiment showed that weld defect affected the L.C.F. behaviour of weldment deleteriously compared to the residual stress or microstructure, and it reduced the L.C.F. life about 70-80%. The PWHT exhibited beneficial effect on the L.C.F. behaviour and increased the L.C.F. life about 120%. This enhancement by PWHT was attributed to the removal of residual stress and recovery of weld metal ductility. The cyclic stress flow of as welded specimens showed intermediate cyclic softening, whereas those of heat treated specimens showed continuous cyclic hardening, and this difference was explained in terms of the residual stress removal and dislocation behaviour. Scanning electron microscopy studies of fatigue fracture surface showed that weld defects of large size and near weld surface were detrimental to the L.C.F. behaviour of weldment.