1 |
Chai, Z., Kang, T. and Chen, W. (2014), "Effects of organic silicone additive material on physical and mechanical properties of mudstone", Geomech. Eng., 6(2), 139-151.
DOI
|
2 |
Chen, S.J., Zhou, H., Guo, W.J., Wang, H.L. and Sun, X.Z. (2012), "Study on long-term stress and deformation characteristics of strip pillar", J. Min. Safe. Eng., 29(3), 376-380.
|
3 |
Heap, M.J. and Faulkner, D.R. (2008), "Quantifying the evolution of static elastic properties as crystalline rock approaches failure", J. Rock Mech. Min. Sci., 45(4), 564-573.
DOI
|
4 |
Huang, D., Huang, R.Q. and Zhang, Y.X. (2012), "Experimrntal investigations on static loading rate effects on mechanical properties and energy mechanism of coarse crystal grain marble under uniaxial compression", Chin. J. Rock Mech. Eng., 31(2), 245-255.
|
5 |
Jorat, M.E., Kreiter, S., Moerz, T., Moon, V. and de Lange, W. (2013), "Strength and compressibility characteristics of peat stabilized with sand columns", Geomech. Eng., 5(6), 575-594.
DOI
|
6 |
Kong, X., Liu, J., Zou, D. and Liu, H. (2016), "Stress-dilatancy relationship of Zipingpu gravel under cyclic loading in triaxial stress states", J. Geomech., 16(4), 04016001.
DOI
|
7 |
Lyamina, E.A. and Nguyen, T. (2016), "Effect of the yield criterion on the strain rate and plastic work rate intensity factors in axisymmetric flow", Struct. Eng. Mech., 58(4), 719-729.
DOI
|
8 |
Qiu, S.L., Feng, X.T., Xiao, J.Q. and Zhang, C.Q. (2014), "An experimental study on the pre-peak unloading damage evolution of marble", Rock Mech. Rock Eng., 47(2), 401-419.
DOI
|
9 |
Mouthereau, F., Fillon, C. and Ma, K.F. (2009), "Distribution of strain rates in the Taiwan orogenic wedge", Earth Planet. Sci. Lett., 284(3-4), 361-385.
DOI
|
10 |
Qi, C., Wang, M. and Qian, Q. (2009), "Strain-rate effects on the strength and fragmentation size of rocks", J. Imp. Eng., 36(12), 1355-1364.
DOI
|
11 |
Wang, C.Q., Gao, L.Q. and Chen, S.J. (2013), "Field research on long-term bearing capacity of strip pillar", J. Min. Safe. Eng., 30(6), 799-804.
|
12 |
Wang, H.L., Fan, P.X., Wang, M.Y., Li, W.P. and Qian, Y.H. (2011), "Influence of strain rate on progressive failure process and characteristic stresses of red sandstone", Rock Soil Mech., 32(5), 1340-1346.
|
13 |
Xiao, J.Q., Ding, D.X., Xu, G. and Jiang, F.L. (2010), "Deformation characteristics of rock under constant amplitude cyclic loading", J. Central South Univ. Sci. Technol., 41(2), 685-691.
|
14 |
Zhou, J.W., Yang, X.G., Fu, W.X., Xu, J., Li, H.T., Zhou, H.W. and Liu, J. (2010), "Experimental test and fracture damage mechanical characterstic of brittle rock under uniaxial cyclic loading and un loading conditions", Chin. J. Rock Mech. Eng., 29(6), 1172-1183.
|
15 |
Xie, Z., Peng, F. and Zhao, T. (2014), "Experimental study on Fatigue crack propagation of fiber metal laminates", Steel Compos. Struct., 17(2), 145-157.
DOI
|
16 |
Yu, S., Zhu, W.S., Yang, W.M., Zhang, D.F. and Ma, Q.S. (2015), "Rock bridge fracture model and stability analysis of surrounding rock in underground cavern group", Struct. Eng. Mech., 53(3), 481-495.
DOI
|
17 |
Zhang, J., Yang, J., Han, J. and Zhang, W. (2016), "Evaluation of dilatancy behavior of asphalt mixtures using partial triaxial compression tests", J. Mater. Civ. Eng., 28(1), 1-10.
|
18 |
Zhao, W., Huangb, R. and Yanc, M. (2015), "Mechanical and fracture behavior of rock mass with parallel concentrated joints with different dip angle and number based on PFC simulation", Geomech. Eng., 8(6), 757-767.
DOI
|
19 |
Zhao, X., Cai, M. and Cai, M. (2010), "Considerations of rock dilation on modeling failure and deformation of hard rocks-a case study of the mine-by test tunnel in Canada", J. Rock Mech. Geotech. Eng., 2(4), 338-349.
|
20 |
Zhou, X.P., Yang, H.Q. and Zhang, Y.X. (2009), "Rate dependent critical strain energy density factor of Huanglong limestone", Theor. Appl. Fract. Mech., 51(1), 57-61.
DOI
|