• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.1
• /
• pp.55-59
• /
• 2011

Folding endurance, bending fatigue and monotonic tensile tests of 4 kinds of Cu foil on flexible substrate was performed to investigate the relationship between folding or bending endurances and tensile characteristics. The repeated 5.3 or 2.0% strain was applied to Cu foil in folding endurance test or bending fatigue test while monitoring the electrical resistance. Elastic modulus, yield strength, ultimate tensile strength, ductility, and toughness were obtained by monotonic tensile test on the same samples. The Cu foil with higher toughness and ductility showed higher reliabilities in folding or bending fatigue. However, elastic modulus and yield strength did not show any relationship with folding and bending reliability. This is because the failures of Cu foil by folding or bending fatigue were closely related to the fracture energy of metal.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.235-246
• /
• 2003

Since the study of Lee et al.(1994) there have been some case studies on the set-up effect of driven piles in Korea country. However, comprehensive examination on the analyses of the set-up effect with various testing data has not been carried out. In particular, the analysis of the influence of soil type and pile shape on the set-up effect has not been reported. It is necessary to analyse the test results of production piles in order to apply the set-up effect of driven piles for the field engineering. In this study some test piling and analyses were performed to give basic information to the piling design as well as the research on the set-up effect in sandy soils. The analyses on the set-up effect were performed with the monitoring data obtained from the high-strain dynamic loading tests. It was shown that the set-up effect of driven piles was not only affected by soil type but also by soil formation history It turned out that the set-up effect in sandy soils was considerable one that should not be ignored in the field, and that the bearing capacity increase of pile is mainly caused by the increase of shaft resistance. It was shown that the set-up effect of closed pile was larger than that of opened pile in clayey soils, while the set-up effect of opened pile was larger than that of closed pile in sandy soils.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.1
• /
• pp.6-12
• /
• 2010

Fiber optic sensor using fiber Bragg grating(FBG) probes is used for monitoring strain and temperature distributed on the wide surfaces of large structures. In this paper, in order to use many FBG probes in one optical fiber line, we propose a complex multiplexing technology which is composed of two techniques, one is time division multiplexing and another is wavelength division multiplexing. However, we only investigate the characteristics of time division multiplexing because FBG sensors basically can be operated by wavelength division multiplexing. We calculate the optimal reflectivities and the lengthwise location of five FBG probes in serial connection in order to obtain the unique reflected intensities from the FBG probes. We fabricate five FBG probes with the reflectivities of 13%, 16%, 25%, 40% and 80%, which are determined by the theoretical calculation, and observe the signal reflected from each FBG in the time domain from the experiment. There are differences between experimental and theoretical results caused by the signal noise and the differences of reflectivities of FBG probes. But the experimental results shows the reflected signals of five FBG probes which prove the availability of complex multiplexing.

• Korean Journal of Oriental Medicine
• /
• v.12 no.1
• /
• pp.49-57
• /
• 2006

Objectives : This study has attempted to establish an organized system for the microbiological quality of raw materials which are important factors in preparing the standard for microbial limits. Methods : This study has first set up microbial contamination limit test. total aerobic microbial count and total fungi count, int accordance with testing method of the Korea Pharmacopeia 8th edition in order to establish an inspection standard for microbial contamination. Results : The microbial contamination of 18 items that are highly prone to contamination by three regions(Seoul, Daejeon, Gyeongsangbuk-do), As a result, Morus alba Linne and Rehmannia glutimosa Liboschitz var. purpurea Makino showed as high contaminated by WHO's Microbial Contamination Limit standard. In case of Yukjin medicine in the Theory of Herb Medicinal Properties, total bacterial contamination rate showed as 17.7%, total fungal contamination rate showed as 41.2% and total aerobic mircobial count and total fungi count on Ephedra sinica Stapf. Pinellia ternate Breitenbach, Evodia officinalis Dode showed as high measured. The microbial conatmination rate materials which make up Yukmijihwanghwan were mostly high therefore the total aerobic microbial count was measured as high in case of Yukmijihwanghwan, the characteristics about microbial contamination strain is to be researched. Conclusions : By combining the basic data and experimental results related to microbial contamination of herb medicine, the most ideal storage standards for herb medicine has been attempted to be presented.

• Earthquakes and Structures
• /
• v.16 no.2
• /
• pp.221-234
• /
• 2019

Today, many important concrete face rockfill dams (CFRDs) have been built on the world, and some of these important structures are located on the strong seismic regions. In this reason, examination and monitoring of these water construction's seismic behaviour is very important for the safety and future of these dams. In this study, the nonlinear seismic behaviour of Ilısu CFR dam which was built in Turkey in 2017, is investigated for various reservoir water heights taking into account 1995 Kobe near-fault and far-fault ground motions. Three dimensional (3D) finite difference model of the dam is created using the FLAC3D software that is based on the finite difference method. The most suitable mesh range for the 3D model is chosen to achieve the realistic numerical results. Mohr-Coulomb nonlinear material model is used for the rockfill materials and foundation in the seismic analyses. Moreover, Drucker-Prager nonlinear material model is considered for the concrete slab to represent the nonlinearity of the concrete. The dam body, foundation and concrete slab constantly interact during the lifetime of the CFRDs. Therefore, the special interface elements are defined between the dam body-concrete slab and dam body-foundation due to represent the interaction condition in the 3D model. Free field boundary condition that was used rarely for the nonlinear seismic analyses, is considered for the lateral boundaries of the model. In addition, quiet artificial boundary condition that is special boundary condition for the rigid foundation in the earthquake analyses, is used for the bottom of the foundation. The hysteric damping coefficients are separately calculated for all of the materials. These special damping values is defined to the FLAC3D software using the special fish functions to capture the effects of the variation of the modulus and damping ratio with the dynamic shear-strain magnitude. Total 4 different reservoir water heights are taken into account in the seismic analyses. These water heights are empty reservoir, 50 m, 100 m and 130 m (full reservoir), respectively. In the nonlinear seismic analyses, near-fault and far-fault ground motions of 1995 Kobe earthquake are used. According to the numerical analyses, horizontal displacements, vertical displacements and principal stresses for 4 various reservoir water heights are evaluated in detail. Moreover, these results are compared for the near-fault and far-faults earthquakes. The nonlinear seismic analysis results indicate that as the reservoir height increases, the nonlinear seismic behaviour of the dam clearly changes. Each water height has different seismic effects on the earthquake behaviour of Ilısu CFR dam. In addition, it is obviously seen that near-fault earthquakes and far field earthquakes create different nonlinear seismic damages on the nonlinear earthquake behaviour of the dam.

• Journal of Food Hygiene and Safety
• /
• v.37 no.2
• /
• pp.63-68
• /
• 2022

The purpose of this study is to investigate the distribution of toxin genes and antimicrobial resistance of Vibrio parahaemolyticus isolated from seafood in Gwangju. A total of 335 seafood, including 163 shellfish, 97 fish, and 36 mollusk, were tested in this study. As a result, V. parahaemolyticus was detected in 123 (36.7%) of 335 seafood. The tdh gene was not detected in all strains, while the trh gene was detected in 3 strains (2.4%). According to antimicrobial susceptibility test, 116 strains (94.3%) represent resistance to ampicillin, and 1 strain (0.8%) represents resistance to trimethoprim/sulfametoxazole. However, all strains were sensitive to 9 antimicrobial agents, including amikacin, chloramphenicol, tetracycline, and more. Therefore, the risk of V. parahaemolyticus isolated from seafood in Gwangju is considered low, but continuous monitoring of V. parahaemolyticus in seafood is required.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.400-414
• /
• 2021

Under high-level radioactive waste repository conditions, bentonite as an engineered barrier material undergoes thermal, hydrological, mechanical, and chemical processes. We report the applications of X-ray Computed Tomography (CT) imaging technique on the characterization and analysis of bentonite over the past decade to provide a reference of the utilization of this technique and the recent research trends. This overview of the X-ray CT technique applications includes the characterization of the bentonite either in pellets or powder form. X-ray imaging has provided a means to extract grain information at the microscale and identify crack networks responsible for the pellets' heterogeneity. Regarding samples of pellets-powder mixtures under hydration, X-ray CT allowed the identification and monitoring of heterogeneous zones throughout the test. Some results showed how zones with pellets only swell faster compared to others composed of pellets and powder. Moreover, the behavior of fissures between grains and bentonite matrix was observed to change under drying and hydrating conditions, tending to close during the former and open during the latter. The development of specializing software has allowed obtaining strain fields from a sequence of images. In more recent works, X-ray CT technique has served to estimate the dry density, water content, and particle displacement at different testing times. Also, when temperature was added to the hydration process of a sample, CT technology offered a way to observe localized and global density changes over time.

• Journal of Food Hygiene and Safety
• /
• v.38 no.4
• /
• pp.246-254
• /
• 2023

V. parahaemolyticus causes waterborne and foodborne disease such as acute diarrhea. In this study, V. parahaemolyticus isolates from seawater, fish tanks, and distributed fishery products in Jeju were investigated for potential toxin or species-specific genes (tdh, trh, tlh, and toxR) using RT-PCR and their genetic characteristics were analyzed using Pulsed-field gel electrophoresis (PFGE). Overall, V. parahaemolyticus of 90 strains (36.7%), including 33 strains from seawater, 8 strains from fish tanks, and 50 strains from fishery products, were isolated from 245 samples. All V. parahaemolyticus strains did not detect the tdh gene, whereas all strains detected tlh or toxR genes. In addition, trh genes were detected in 3 strains from seawater and 1 strain from fishery products. Monthly quantitative testing of seawater revealed that V. parahaemolyticus was positively correlated with water temperature. The 90 strains of V. parahemolyticus obtained in this study showed by gene homology between types, ranging from 64.0-97.3%. Among these, thirteen types showed 100% homology between genes. These results indicate that continuous monitoring is needed to facilitate food poisoning epidemiological investigations because some isolated V. parahaemolyticus strains harbored toxin genes and V. parahaemolyticus strains isolated from seawater, fish tanks, and distributed fishery products showed genetic similarity.

• Pediatric Infection and Vaccine
• /
• v.31 no.1
• /
• pp.46-54
• /
• 2024

Purpose: This study aimed to identify the pathogens of bloodstream infection in children with underlying hemato-oncologic diseases, analyze susceptibility patterns, compare temporal trends with those of previous studies, and assess empirical antimicrobial therapy. Methods: Retrospective review study of children bacteremia in hemato-oncologic diseases was conducted at Seoul National University Bundang Hospital from January 2013 to July 2023. Results: Overall, 98 episodes of bacteremia were observed in 74 patients. Among pathogens isolated, 57.1% (n=56) were Gram-positive bacteria, 38.8% (n=38) were Gram-negative bacteria, and 4.1% (n=4) were Candida spp. The most common Gram-positive bacteria were coagulase-negative staphylococci (n=21, 21.4%) and Staphylococcus aureus, (n=14, 14.3%) whereas the most common Gram-negative bacteria were Klebsiella pneumoniae (n=16, 16.3%) and Escherichia coli (n=10, 10.2%). The susceptibility of Gram-positive bacteria to penicillin, oxacillin, and vancomycin was 11.5%, 32.7%, and 94.2%, respectively and the susceptibility of Gram-negative bacteria to cefotaxime, piperacillin/tazobactam, imipenem, gentamicin, and amikacin was 68.6%, 80%, 97.1%, 82.9%, and 91.4%, respectively. Methicillin-resistant S. aureus was detected in 1 strain and among Gram-negative strains, extended spectrum β-lactamase accounted for 28.9% (12/38). When analyzing the antibiotic susceptibility and empirical antibiotics, the mismatch rate was 25.5% (n=25). The mortality rate of children within 30 days of bacteremia was 7.1% (n=7). Conclusions: Empirical antibiotic therapy for bacteremia in children with hemato-oncologic diseases should be based on the local antibiogram in each institution and continuous monitoring is necessary.

• Journal of Environmental Health Sciences
• /
• v.50 no.2
• /
• pp.93-101
• /
• 2024

Background: As pollutants caused by non-point sources flow into rivers, river water quality monitoring for fecal pollution is becoming increasingly important. Objectives: This study was conducted to investigate the distribution of microbial communities in the Yeongsangang River water system and sewage treatment plants in Gwangju and to evaluate their antibiotic resistance. Methods: In the experiment, samples were distributed to five selective media at each point and then cultured for 18 to 24 hours. When bacteria were observed, they were sub-cultured by size and shape and identified using MALDI-TOF MS equipment. When identification was completed, 17 types of antibiotic susceptibility tests were performed using VITEK II equipment, focusing on gram-negative dominant species among the identified strains. Results: During the study period, a total of 266 strains were isolated from 39 samples. Gram-positive bacteria were 37 strains in four genera, or 13.9% of the total, and Gram-negative bacteria were 229 strains in 23 genera, or 86.1% of the total. Antibiotic susceptibility testing of 23 strains, the major dominant species, showed that one strain (4.3%) was resistant to only one antibiotic, and two strains (8.7%) were 100% susceptible to the 17 antibiotics tested. The other 20 strains (87.0%) were multidrug resistant bacteria resistant to two or more antibiotics. There were various types of multidrug resistance. Among them, penicillin and cephalosporin series showed the highest resistance. Conclusions: Based on the results of this study, it was found that the bacterial community structure changed according to regional and environmental factors, and it was judged that continuous research such as genetic analysis of antibiotic-resistant bacteria present in natural rivers is necessary.