• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1373-1380
• /
• 1992

The local cyclic strain distribution near the crack tip has been investigated by the fine Dot Grid Strain Measurement Method, which had been suggested strain measurement method to resolve experimental difficulties by authors. It has been found that the magnitude of the local cyclic strain distribution(.DELTA..epsilon.$_{eq}$ )near a crack tip has been varied by the applied cyclic load level and material, but the shape of the local cyclic strain distribution near the crack tip has been experimentally scrarcely altered : that is .DELTA..epsilon.$_{eq}$ = .DELTA.A.f(.theta.). $r^{-1}$ . Consequently, the local cyclic strain field near the crack tip could be favorably characterized by a single parameter fatigue strain intensity factor .DELTA.A. In addition, with the viewpoint that .DELTA.A depends on material and load level, .DELTA.A has been applied to evaluate the fatigue crack propagation rate and usefulness of the result has been considered. As a result, it has been ascertained that .DELTA.A has been a useful parameter to evaluate the fatigue crack propagation rate.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.9
• /
• pp.2205-2213
• /
• 1993

The characteristic test for gage factors of temperature self-compensated strain gages at cryogenic temperature is presented. By joining the international round robin test on electrical strain gages at cryogenic temperatures, the gage factors of three kinds of widely-used strain gages are obtained at the room temperature, the temperatures of liquid nitrogen and liquid helium. The calibration system which produce precise bending strain is by mechanical loading at cryogenic temperature. This paper also presents the creep characteristic of strain gages at maximum strain level.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.6
• /
• pp.925-932
• /
• 1997

Two shear-flexible curved axisymmetric shell elements with two nodes, LCCS(linear curvature and constant strain) and CCCS(constant curvature and constant strain) are designed based on the assumed meridional strain fields and shallow shell geometry. At the element level, meridional curvature, membrane strain and shear strain fields are assumed by using polynomials and the displacement fields are obtained by integrating the assumed strain fields along the shallowly curved meridian. The formulated elements have high order displacement fields consistent with the strain field. Several test problems are given to demonstrate the performance of the two elements. Analysis results obtained reveal that the elements are very accurate in the displacement and the stress predictions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4C
• /
• pp.175-182
• /
• 2009

The stress-strain relationship of an unsaturated soil was analyzed by Bishop stress descriptions in this study. The failure criteria could be defined uniquely by the Bishop stress and were also independent of matric suctions. In the low level of matric suctions the failure criteria have a linear relationship and the estimated criterion fitted the measured accurately. Deformation moduli in the small strain level were linearly increased generally with respect to Bishop stress.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.10
• /
• pp.1355-1359
• /
• 2004

Japanese Black cattle of Hyogo prefecture (Tajima strain) are famous for its ability to produce high-quality meat and have been maintained as a closed system for more than 80 years. In order to assess the usefulness of microsatellite markers in closed cattle populations, and evaluate the genetic structure of the Tajima strain, we analyzed representative dams of the Tajima strain comprised of the substrains Nakadoi and Kinosaki. Genetic variability analyses indicated low genetic diversity in the Tajima strain. In addition, a recent genetic bottleneck, which could be accounted for by the high level of inbreeding, was detected in both substrains. In phylogenetic analyses, relationship coefficients and genetic distances between individuals were calculated using pedigree and microsatellite information. Two phylogenetic trees were constructed from microsatellite and pedigree information using the UPGMA method. Both trees illustrated that most individuals were distinguished clearly on the basis of the two substrains, although in the microsatellite tree some individuals appeared in clusters of different substrains. Comparing the two phylogenetic trees revealed good consistency between the microsatellite analysis tree and the pedigree information. The correlation coefficient between genetic distances derived from microsatellite and pedigree information was 0.686 with a high significance level (p<0.001). These results indicated that microsatellite information may provide data substantially equivalent to pedigree information even in unusually inbred herds of cattle, and suggested that microsatellite markers may be useful in revealing genetic structure without accurate or complete pedigree nformation. Japanese Black cattle of Hyogo prefecture (Tajima strain) are famous for its ability to produce high-quality meat and have been maintained as a closed system for more than 80 years. In order to assess the usefulness of microsatellite markers in closed cattle populations, and evaluate the genetic structure of the Tajima strain, we analyzed representative dams of the Tajima strain comprised of the substrains Nakadoi and Kinosaki. Genetic variability analyses indicated low genetic diversity in the Tajima strain. In addition, a recent genetic bottleneck, which could be accounted for by the high level of inbreeding, was detected in both substrains. In phylogenetic analyses, relationship coefficients and genetic distances between individuals were calculated using pedigree and microsatellite information. Two phylogenetic trees were constructed from microsatellite and pedigree information using the UPGMA method. Both trees illustrated that most individuals were distinguished clearly on the basis of the two substrains, although in the microsatellite tree some individuals appeared in clusters of different substrains. Comparing the two phylogenetic trees revealed good consistency between the microsatellite analysis tree and the pedigree information. The correlation coefficient between genetic distances derived from microsatellite and pedigree information was 0.686 with a high significance level (p<0.001). These results indicated that microsatellite information may provide data substantially equivalent to pedigree information even in unusually inbred herds of cattle, and suggested that microsatellite markers may be useful in revealing genetic structure without accurate or complete pedigree information.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.3
• /
• pp.85-94
• /
• 2011

Mixtures of sand and rubber particles ($D_{sand}/D_{rubber}=1$) are investigated to explore their characteristics under different stain level. Mixtures are prepared with different volumetric sand fractions ($sf=V_{sand}/V_{total}$). Experimental data are gathered from a resonant column, an instrumented oedometer, and a direct shear tests. Results show that sand and rubber differently control the behavior of the whole mixture with strain level. Non-linear degradation of small strain stiffness is observed for the mixtures with $sf{\geq}0.4$, while the mixtures with low sand fraction ($sf{\leq}0.2$) show significantly high elastic threshold strain. Vertical stress-deformation increases dramatically when the rubber particle works as a member of force chain. The strength of the mixtures increases as the content of rubber particle decreases, and contractive behavior is observed in the mixtures with $sf{\leq}0.8$. Rubber particle plays different roles with strain level in the mixture: it increases a coordination number and controls a plasticity of the mixture in small strain; it prevents a buckling of force chain in intermediate strain; it leads a contractive behavior in large strain.

• Nuclear Engineering and Technology
• /
• v.47 no.3
• /
• pp.340-350
• /
• 2015

This paper proposes strain-based acceptance criteria for assessing plastic instability of the safety class 1 nuclear components made of ferritic steel during level D service loads. The strain-based criteria were proposed with two approaches: (1) a section average approach and (2) a critical location approach. Both approaches were based on the damage initiation point corresponding to the maximum load-carrying capability point instead of the fracture point via tensile tests and finite element analysis (FEA) for the notched specimen under uni-axial tensile loading. The two proposed criteria were reviewed from the viewpoint of design practice and philosophy to select a more appropriate criterion. As a result of the review, it was found that the section average approach is more appropriate than the critical location approach from the viewpoint of design practice and philosophy. Finally, the criterion based on the section average approach was applied to a simplified reactor pressure vessel (RPV) outlet nozzle subject to SSE loads. The application shows that the strain-based acceptance criteria can consider cumulative damages caused by the sequential loads unlike the stress-based acceptance criteria and can reduce the overconservatism of the stress-based acceptance criteria, which often occurs for level D service loads.

• Journal of the Korean Society of Safety
• /
• v.17 no.2
• /
• pp.52-57
• /
• 2002

In this study. stress-strain relationships were investigated by performing the confined extension tests for seven types of geosynthetics such as geotextiles, composite geosynthetics and geogrids. A comparison was made between unconfined and confined moduli for each geosynthetic material to quantify the soil confinement effect on stress-strain properties. A comparison was also made between the increase of moduli at the same strain level with the types of the geosynthetics to demonstrate the different stress-strain responses. Based on the result of the extension tests, the higher the confining stress, the larger the secant modulus of geosynthetics. The secant modulus at 5% strain is twice as much as that of 10% strain, especially there is a noticeable increasing of secant modulus for the two nonwoven geotextiles.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.351-356
• /
• 1999

An elasto-plastic constitutive model was Proposed, in which the behavior at small-to-large strain level can be modeled. From a mathematical approach it was proved that the model includes the previous successful models. The experimental results of a series of resonant column tests, torsional shear tests and triaxial tests were verified and as a result the proposed model could predict small-to-large strain behavior more consistently and accurately than the hyperbolic model and the Ramberg-Osgood model for a weathered granitic soil.

• Microbiology and Biotechnology Letters
• /
• v.23 no.1
• /
• pp.1-5
• /
• 1995

Bacterial strains showing the fibrinolytic activity were screened from Chungkook-jang and Natto (Japanese traditional soy food). The strains isolated from Natto revealed a high level of fibrinolytic activity, wherease nearly half of the isolates from Chungkook-jang did not show the relevant activity. However, one strain isolated from Chungkook-jang showed the highest fibrinolytic activity (1.84 plasmin unit), and subsequently identified as Bacillus species. The fibrinolytic strain was designated as Bacillus sp. CK 11-4.