• 대한물리치료과학회지
• /
• 제9권1호
• /
• pp.95-102
• /
• 2002

The present study focuses on the relation of the attitudes of university students to disabled by using modified disability factor scales(DFS, Siller). As for the attitude areas, it relies on the eight categories DFS provides. The 8 categories that specify each attitude area are: generalized rejection, distressed identification, inferred emotional consequences, imputed functional limitation, authoritarian virtuousness, rejection of intimacy, interaction strain, mainstreaming. This study is based on a series of questionnaire researches conducted on 322 students, over the period from October 19th to November 14th, 2001. The questionnaire carries 50 items, covering the 8 attitude areas and each item has 5 choices. The subjects' responses to each of the areas are examined in their relations to the four conditions, as they are analysed by t-test and one way ANOVA. The conclusion drawn from the research are as follows: 1. There is no significant difference between the students of the department concerned with the problem of disability, and those of the department unconcerned. But the responses are significantly different in the three areas of generalized rejection, rejection of intimacy and interaction strain(1st condition, P<.05). 2. The responses are significantly different in 6 areas except for the two, distressed identification and inferred emotional consequences, between the students who have volunteered services as helpers of the disabled and those who have no such experiences(2nd condition, P<.05). 3. the responses are significantly different between those who have volunteered long-time services and those who are far less experienced(3nd condition, P<.05). 4. There is no significant difference, whether the subjects have disabled persons around them or not. But generalized rejection, authoritarian virtuousness, rejection of intimacy, interaction strain & mainstreming show significant differences(4th condition, P<.05). 5. Generalized rejection, rejection intimacy and interaction strain show significant differences in every pair of the 4 condition. 6. Distressed identification and inferred emotional consequence show no significant difference between the two conditions in every pair of the 4 considerations.

• 대한기계학회논문집A
• /
• 제40권2호
• /
• pp.167-173
• /
• 2016

본 논문은 유한요소해석을 이용한 고변형률 조건에서의 연성파손 해석기법을 제안한다. 고변형률 하중이 작용하는 구조물에 대한 파괴거동 예측을 위해 본 논문에서는 Johnson/Cook 모델을 고려한 수정응력 파괴변형률 모델을 사용하였다. 제시된 모델은 인장 실험 모사해석결과로부터 얻어지는 삼축응력 및 파괴변형률에 의해 파손이 정의된다. 다양한 실험속도의 인장 실험결과 및 정적 하중조건에서의 파괴인성 실험을 이용하여 수정응력 파괴변형률 모델의 변수를 결정하였다. 결정된 모델을 이용하여 동적하중조건에서 파괴인성시편에 대한 해석을 수행하였으며 해석결과와 실험결과를 비교하여 해석기법을 검증하였다.

• 대한기계학회논문집
• /
• 제11권3호
• /
• pp.454-464
• /
• 1987

본 연구에서는 충격하중하에서 고변형도 .epsilon.=ln(h/h$_{o}$ )＞1.0, 고변형도율 (.epsilon.＞$10^{3}$m/s/m)로 변형하는 재료에 대하여 응력, 변형도, 변형도율사이의 함수관 계를 유도하고, 다음과 같은 현상들을 규명하였다. (1) 고변형도율에서 응력, 변형 도, 변형도율사이의 함수관계식 유도. (2) 압축하중시 시편과 접촉부재사이의 접촉면 에서 발생하는 마찰영향의 조사. (3) 유동응력과 시편의 기하학적 형상사이의 관계식 유도. (4) 압축하중시 재료의 제동현상(lock-up phenomena)의 해석.

• 한국전산구조공학회논문집
• /
• 제24권3호
• /
• pp.275-281
• /
• 2011

일반적으로 인장 시험에 주로 사용되는 납작한 형태의 금속 재료에 천천히 인장력을 가하고 그 힘을 증가시키면 어느 순간에 루더스 밴드(Luders band)라고 불리는 소성 변형의 띠가 갑자기 발생한다. 이 띠들은 일정 각도를 가지고 평행하게 발생하며, 여러 연구자들에 의해 특정 경계조건에 대하여 이 띠가 발생하는 조건과 그 각도에 대한 많은 연구가 선행되어 왔다. 본 연구에서는 평면 응력 조건에서 이루어진 Thomas(1961)의 연구를 기반으로 하고 $J_2$ 소성 변형 조건, 힘의 평형방정식, 그리고 구성방정식을 이용하여 평면 변형 조건에서 발생하는 밴드의 각도를 해석적으로 유도하였다. 이 결과는 음향텐서를 이용한 기존의 연구 결과와 일치함을 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제16권3호
• /
• pp.325-330
• /
• 1995

혈압에 의한 안쪽벽의 변형을 집중현상으로 인한 동백 전단부의 변형율 gradient의 심각성은 잔유 변형율에 의해 감소되거나 없을 수 있다는 가정을 실험적으로 시도했다. 잔유변형율과 압력에 의한 변형율을 측정하여 잔유변형율이 원주변형율에 끼치는 영향을 알아 보았다. 결과로서 변형율 gradient를 줄이거나 없을수도 있으나 negative gardient가 평균적으로 나타났다. 즉 전체변형율(원주변형율+잔유변형율)은 안쪽벽이 낮고 바깥쪽이 높은 것으로 나타났다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.27-30
• /
• 2002

PMFBG sensor was fabricated using phase mask and Excimer laser. The reflected wavelength of PMFBG sensor had dual peaks due to intrinsic birefringence. To discover the polarization axes, peak sensitivity was measured under compression test. The signal characteristics of PMFBG sensor were also examined in embedding condition. The embedded PMFBG sensor in epoxy block was loaded for the transverse strain measurements. Experiments showed that the PMFBG sensor could successfully measure the transverse strain. This PMFBG sensor is useful for the structures that require measuring transverse stram.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.724-727
• /
• 1995

Dynamic deformation behavior under the high strain rate loading condition obtained with the aid of Split Hopkinson Pressure Bar(SHPB) technique is simulated by DYNA2D (an hydrodynamic code). A constitutive equation such as Johnson-Cook model is used by adjusting various parameters to fit experimentally determined dynamic stress-strain relationship.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.1032-1040
• /
• 2001

It is widely accepted that the pressure variation of interstitial fluid is one of the most important factors in bone physiology. In order to understand the role of interstitial fluid on porous bony structure, a consideration for the biomechanical interactions between fluid and solid constituents within bone is required. In this study, a poroelastic theory was applied to investigate the elastic behavior of calf vertebral trabecular bone composed of the porous solid trabeculae and the viscous bone marrow. The poroelastic behavior of trabecular bone in a uniaxial stress condition was simulated using a commercial finite difference analysis software (FLAC, Itasca Consulting Group, USA), and tested for 5 different strain rates, i.e., 0.001, 0.01, 0.1, and 10 per second. The material properties of the calf vertebral trabecular bone were utilized from the previous experimental study. Two asymptotic poroelastic responses, the drained and undrained deformations, were predicted. From the predicted results for the simulated five strain rates, it was found that the pore pressure generation has a linearly increasing behavior when the strain rate is the highest at 10 per second, otherwise it showed a nonlinear behavior. The pore pressure generation with respect to the strain was found to be increased as the strain rate increased. The elastic moduli predicted at each strain were 208.3, 212.2, 337.6, 593.1, and 602.2 MPa, respectively. Based on the results of the present study, it was suggested that the calf vertebral trabecular bone could be modeled as a poroelastic material and its strain rate dependent material behavior could be predicted.

• International Journal of Korean Welding Society
• /
• 제4권1호
• /
• pp.46-52
• /
• 2004

To combine the mechanical advantages of ceramics with those of metals, one often uses both materials within one composite component. But, as known, they have different material properties and fracture behaviors. In this study, a four-point bending test is carried out on $Si_3N_4$ joined to ANSI 304L stainless steel with a Ti-Ag-Cu filler and a Cu interlayer at room temperature to evaluate their longitudinal strain behaviors. And, to detect localized strain, a couple of strain gages are pasted near the joint interfaces of the ceramic and metal sides. The normal strain rates are varied from $3.33{\times}10^5$ to $3.33{\times}10^{-1}s^{-1}$ Within this range, the experimental results showed that the four-point bending strength and the deflection of the interlayer increased with increasing the strain rate.

• 한국안전학회지
• /
• 제5권2호
• /
• pp.58-65
• /
• 1990

The purpose of this study is to consider the effects of strain rate on the stress-strain behavior of sheet metal at instability. The results and conclusions obtained as follows ： 1. As the strain rate increases, the fracture pressure increases and the polar height at fracture decreases. 2. The effect of strain rate on forming limit diagram produces a general lowering of the diagram with increasing strain rate but changes according to materials and strain paths. 3. The forming limit diagram predicted by swift instability theory is comparatively inconsistent with the experimental result at high strain rates, because there is inevitable gap between them.