• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.357-360
• /
• 2007

The profile ring rolling process of Ti-6Al-4V alloy was designed by finite element(FE) simulation and experimental analysis. The design includes geometry design and optimization of process variables. The geometry design such as initial billet and blank sizes, and final rolled ring shape was carried out with the calculation method based on the uniform deformation concept between the wall thickness and ring height. FEM simulation was used to calculate the state variables such as strain, strain rate and temperature and to predict the formation of forming defects during ring rolling process. Finally, the mechanical properties of profiled Ti-6Al-4V alloy ring product were analyzed with the evolution of microstructures during the ring rolling process.

• 폴리머
• /
• 제28권1호
• /
• pp.51-58
• /
• 2004

탄성체 (가교된 고분자) 가스가 용해된 고분자 또는 유기 용매에 용해된 고분자 용액에서 기포 생성을 예측하기 위하여 균일한 기포 생성은 고전적인 이론에서의 임계 기포의 생성이 아닌 임계 뭉치의 생성을 통하여 이루어진다는 분자 뭉치 이론을 적용하였다. 또한 탄성체나 고분자 내에서 기포가 생성하는 경우 임계 기포가 극복해야 할 탄성 에너지를 고려하였다. 대략 $10^{8}$∼$10^{12}$개에 달하는 분자 뭉치 이론에 의해 계산된 단위 부피당 생성된 기포 수는 실험치와 잘 일치하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 사면안정학술발표회
• /
• pp.119-127
• /
• 2003

For the calculation of internal stability, the hypothesis in conventional design is on the basis of two distinct zones, which are‘active zone’and‘passive zone’. This means that there is an abrupt discontinuous transition from active to passive states across a potential failure line. The existence of a discontinuity of this nature appears physically unreasonable, especially from kinematic considerations. A series of pull-out model tests was undertaken from a wall being rotated about the toe to find the strain distribution mobilized from near the wall face into the deep, stable zone through the centre plane. With this finding of transition zone, the objective of study is aiming at identifying the likely effect of this zone in designing method by comparing with the prevailing design method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.547-552
• /
• 1998

Lateral pressure by circular reinforcement greatly enhances the maximum strength and ductility of spiral columns. The lateral confinement effects will be improves ductility of high-strength concrete. The major purpose of this paper is to study on the improvements of maximum strength and strain at that point of spiral concrete columns subject to axial loads. For this purpose, this study collected the other analytical results and the experimental data that has been performed by a lot of worldwide researchers and also analyzed it statistically. As the result, the theoretical equation for predict maximum strength and strain at that point was proposed. It is based on calculation of lateral confinement pressure generated by circular reinforcement, and the resulting improvements in strength and ductility of confined concrete.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.105-108
• /
• 2003

Sheets of aluminum alloy 1100 were asymmetrically cold rolled in a rolling mill with different roll speeds. In order to promote the shear deformation during asymmetrical rolling, cold rolling without lubrication was performed. The evolution of texture components during asymmetrical rolling was investigated by the calculation of the orientation distribution function (ODF) using the monoclinic sample symmetry. The strain state during asymmetrical rolling was tackled by means of FEM calculations. Asymmetrical rolling gave rise to the development of pronounced strain gradients throughout the thickness layers which resulted in the formation of strong texture gradients in the aluminum sheet.

• Journal of Microbiology
• /
• 제40권1호
• /
• pp.38-42
• /
• 2002

The strain KKI isolated from soil contaminated with polycyclic aromatic hydrocarbons was identified as Pseundomonas sp. based on analyses by MIDI and Biolog Identification System. Cellular and physiological responses of strain KKI to two-ring polycyclic aromatic hydrocarbon, naphthalene were evaluated using radiorespirometry, PLFAs and sequence analysis of Rieske-type iron sulfur center of dioxygenase. KKI was found to be able to rapidly mineralize naphthalene. Notably, KKI cells pregrown on phenanthrene were able to mineralize naphthalene much more rapidly than naphthalenepregrown cells. The total cellular fatty acids of KKI were comprised of eleven C-even and two C-odd fatty acids (fatty acids < 0.2% in abundance were not considered in this calculation). Lipids 12:0 2OH, 12:03 OH, 16:0, 18:1 6c, 18:0 increased for naphthalene-exposed cells, while lipids 18:1 7c1/15:0 ism 2OH, 17:0 cyclo, 18:1 7c, 19:0 cyclo decreased. Data from Northern hybridization using a naphthalene dixoygenase gene fragment cloned out from KKI as a probe provided the information that naphthalene dioxygenase gene was more highly expressed in cells grown on phenanthrene than naphthalene.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.554-559
• /
• 2007

The cylinder cover stud for assembling the combustion chamber components of low-speed marine diesel engine is one of the main structural components in engine. To understand the structural behavior of the stud is quite important for safe and economic design of it. In this paper, the structural behavior and design adequacy of the stud have been evaluated through strain measurement and structural analysis for the world's two largest engine types. Moreover, a feasibility study for design modification was carried out based on fatigue test and calculation. The results showed that 1) the stud experiences very high stress ratio under normal operating conditions, 2) the fatigue strength of the stud is sufficient, and 3) results from strain measurement and structural analysis were quite close each other.

• 한국소음진동공학회논문집
• /
• 제17권4호
• /
• pp.356-362
• /
• 2007

Magnetostrictive materials have been used for linear actuators due to its large strain, large force output with moderate frequency band in the presence of magnetic field. However their performance analysis is difficult because of nonlinear material behaviors in terms of coupled strain-magnetic field dependence, nonlinear permeability, pre-stress dependence and hysteresis. This paper presents a finite element analysis technique for magnetostrictive linear actuator. To deal with coupled problems and nonlinear behaviors, a simple finite element approach is proposed, which is based on separate magnetic field calculation and displacement simulation. The finite element formulation and an in-house program development are illustrated, and a simulation model is made for a magnetostrictive linear actuator. The fabrication and performance test of the linear actuator are explained, and the performance comparison with simulation result is shown. Since this approach is simple, it can be applied for analyzing magnetostrictive underwater projectors and ultrasonic transducers.

• Architectural research
• /
• 제18권3호
• /
• pp.113-120
• /
• 2016

The stability and resistance of the plates under in-plane loading is crucial in the design of structures. For the assessment of structural stability, it is necessarily required to have accurate finite element technologies. Therefore, the enhanced 9-node plate (Q9-ANS) element is introduced for the linear buckling analysis of plate where the critical buckling load has to be determined. The Q9-ANS is developed with the Reissner-Mindlin (RM) assumptions which consider transverse shear deformation of the plate. Assumed shear strain is used to alleviate the shear locking phenomenon. Numerical examples are carried out to verify the performance of the Q9-ANS element in calculation of critical buckling load of the plates.

• 소성∙가공
• /
• 제12권3호
• /
• pp.244-250
• /
• 2003

Sheets of aluminum alloy 1100 were asymmetrically cold rolled in a rolling mill with different roll speeds. In order to promote the shear deformation during asymmetrical rolling, cold rolling without lubrication was performed with a roll speed ratio of 1.5/l.0. The evolution of texture components during asymmetrical rolling was investigated by the calculation of the orientation distribution function (ODF) using the monoclinic sample symmetry. The strain state during asymmetrical rolling was tackled by means of FEM calculations. Asymmetrical rolling gave rise to the development of pronounced strain gradients throughout the thickness layers which resulted in the formation of strong texture gradients in the aluminum sheet.