• 한국지반공학회지:지반
• /
• 제12권2호
• /
• pp.9-18
• /
• 1996

실험실에서 재 성형한 정규압밀점토에 대하여 실시된 일련의 삼축압축시험 거동결과를 등방단일경화구성모델에 의한 예측치와 비교검토한다. 이 모델사용에 필요한 열한개의 계수는 등방압밀공시체에 대한 비배수삼축압축시험 결과로부터 간단히 결정된다. 이렇게 결정된 계수를 활용한 이 모델로 이방압밀공시체를 대상으로 한 비배수삼축압축시험시의 응력-변형률 및 간극 수압의 거동이 예측된다. 또한 등방압밀공시체 및 이방압밀공시체를 대상으로 실시한 배수삼축 압축시의 응력-변형률 및 체적변형률 거동예측에도 이 모델을 적용하였다. 예측치와 시험치의 비교결과 비배수삼축압축시험의 경우는 등방압밀공시체와 이방압밀공시체 모두에 좋은 일치를 보이고 있다. 그러나 배수삼축압축시험의 경우는 초기 체적변형률의 예측치가 시험치보다 약간 작게 나타나다가 파괴점에 근접함에 따라서는 예측치가 시험치보다 커지는 경향을 보이고 있다. 그러나 전반적인 응력 -변형률거동은 좋은 일치를 보이고 있음을 알 수 있다. 따라서, 본 연구결과 이 모델은 정규압밀점토의 거동예측에 적용성이 충분히 있다고 생각된다.

• 소성∙가공
• /
• 제16권7호
• /
• pp.516-520
• /
• 2007

As the springback of sheet metal during unloading nay cause deviation from a desired shape, accurate prediction of springback is essential for the design of sheet stamping operations. On the removal of the applied load the specimen loses its elastic strain by contracting around the contour of the block, the radius $\rho$ can be determined by the residual differential strain. Therefore in this study the springback estimated by the residual differential strain is experimentally validated through the comparison with those obtained by U-bending test. The springback characteristics of two analytical models are also estimated at various processing conditions such as thickness, curvature of radius and drawing strain. The model based on residual differential strain has an applied transition strain where the springback undergoes a dramatic decrease. Both models show that springback decreases with increased strip thickness and with decreased radius of curvature. For no applied tension, the model based on residual differential strain predicts more springback as compared to the moment based model.

• 한국정밀공학회지
• /
• 제34권4호
• /
• pp.273-279
• /
• 2017

In sheet metal forming numerical analysis, the strain hardening equation has a significant effect on calculation results, especially in the field of spring-back. This study introduces the Kim-Tuan strain hardening model. This model represents sheet material behavior over the entire strain hardening range. The proposed model is compared to other well known strain hardening models using a series of uniaxial tensile tests. These tests are performed to determine the stress-strain relationship for Al6016-T4, DP980, and CP Ti sheets. In addition, the Kim-Tuan model is used to integrate the CP Ti sheet strain hardening equation in ABAQUS analysis to predict spring-back amount in a bending test. These tests highlight the improved accuracy of the proposed equation in the numerical field. Bending tests to evaluate prediction accuracy are also performed and compared with numerical analysis results.

• 소성∙가공
• /
• 제22권1호
• /
• pp.5-10
• /
• 2013

Steel plates are widely used in many manufacturing areas such as ship and bridge construction industries and are fabricated by different forming processes. Steel plates can have various shape defects, such as curl or camber. Roller leveling reduces the magnitude of the residual stress by using small amounts of reverse bending via an appropriate arrangement of the rolls and the associated plastic deformation in the steel plate. In this study a model for the residual stress after roller leveling is developed. In order to simplify the formulation, a plane-strain condition is assumed and the stress in the thickness direction is assumed to be negligible. The camber deformation in a real sized plate are measured and compared with the prediction values from the model to validate the accuracy of the model.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.201-208
• /
• 2000

In this study, the behavior of saturated sandy soils under dynamic loads - pore water pressure and effective stress - was investigated using Disturbed State Concept(DSC) model. The model parameters are evaluated from laboratory test data. During the process of loading and reverse loading, DSC model is utilized to trace strain-hardening and cyclic softening behavior. The procedure of back prediction proposed in this study are verified by comparing with laboratory test results. From the back prediction of pore water pressure and effective mean pressure under cyclic loading, excess pore water pressure increases up to initial effective confining pressure and effective mean pressure decrease close to zero in good greement with laboratory test results. Those results represent the liquefaction of saturated sandy soils under dynamic loads. The number of cycles at initial liquefaction using the model prediction is in good agreement with laboratory test results. Therefore, the results of this study state that the liquefaction of saturated sandy soils can be explained by the effective tress analysis.

• International Journal of Concrete Structures and Materials
• /
• 제5권1호
• /
• pp.57-64
• /
• 2011

An extensive database has been constructed of reinforced concrete (RC) beam-column connection tests subjected to cyclic lateral loading. All cases within the database experienced joint shear failure, either in conjunction with or without yielding of longitudinal beam reinforcement. Using the experimental database, envelope curves of joint shear stress vs. joint shear strain behavior have been created by connecting key points such as cracking, yielding, and peak loading. Various prediction approaches for RC joint shear behavior are discussed using the constructed experimental database. RC joint shear strength and deformation models are first presented using the database in conjunction with a Bayesian parameter estimation method, and then a complete model applicable to the full range of RC joint shear behavior is suggested. An RC joint shear prediction model following a U.S. standard is next summarized and evaluated. Finally, a particular joint shear prediction model using basic joint shear resistance mechanisms is described and for the first time critically assessed.

• Geomechanics and Engineering
• /
• 제23권5호
• /
• pp.493-502
• /
• 2020

The prediction of soil response under repetitive mechanical loadings remains challenging in geotechnical engineering applications. Modeling the cyclic soil response requires a robust model validation with an experimental dataset. This study proposes a unique method adopting linearity of model constant with the number of cycles. The model allows the prediction of the terminal density of sediments when subjected to repetitive changes in pore-fluid pressure based on the two-surface plasticity. Model simulations are analyzed in combination with an experimental dataset of sandy sediments when subjected to repetitive changes in pore fluid pressure under constant deviatoric stress conditions. The results show that the modified plastic moduli in the two-surface plasticity model appear to be critical for determining the terminal density. The methodology introduced in this study is expected to contribute to the prediction of the terminal density and the evolution of shear strain at given repetitive loading conditions.

• 한국재난정보학회 논문집
• /
• 제13권4호
• /
• pp.491-498
• /
• 2017

본 연구의 주 목적은 연성 도로포장의 소성변형 예측모델을 개발하는 것이다. 목적을 수행하기 위하여 다양한 실험실 시험이 수행되었다. 소성변형 량을 측정하기 위하여 측면 구속압을 제공하는 새로운 반복 일축압축시험이 채택되었으며 소성변형 예측모델은 층별-변형률 이론이 적용되었다. 예측모델의 소성계수는 아스팔트 콘크리트 재료의 소성변형시험을 통하여 결정되었다. 본 연구가 수행된 범위내에서 반복 일축압축시험을 통한 연성포장의 소성변형 예측모델이 제안되었다. 제안된 소성변형 예측모델은 연성포장 층 재료의 거동을 적절하게 모사하는 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제32권6호
• /
• pp.488-495
• /
• 2008

In order to achieve long fatigue lifetimes for cyclically pressurized thick cylinders, multi-layered compound cylinder has been proposed. Such compound cylinder involves a shrink-fit procedure incorporating a monobloc tube which has previously undergone autofrettage. The basic autofrettage theory assumes elastic-perfectly plastic behaviour. Because of the Bauschinger effect and strain-hardening, most materials do not display elastic-perfectly plastic properties and consequently various autofrettage mo dels are based on different simplified material strain-hardening models, which is assumed that combination of linear strain-hardenig and power strain-hardening model. This approach gives a more accurate prediction than the elastic-perfectly plastic model and is suitable for different strain-hardening materials. In this paper, a general autofrettage model that incorporates the material strain-hardening relationship and the Bauschinger effect, based upon the actual tensile-compressive stress-strain curve of a material was proposed. The model was obtained using the von Mises yield criterion and plane strain condition. The tensile-compressive stress-strain curve was obtained by experiment. The parameters needed in the model were determined by fitting the actual tensile-compressive curve of the material. Finally, strain- hardening model was compared with elastic-perfectly plastic model.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1404-1414
• /
• 2008

In the mechanistic-empirical trackbed design of railways, the resilient modulus is the key input parameter. This study focused on the resilient modulus prediction model, which is the functions of mean effective principal stress and axial strain, for three types of railroad trackbed materials such as crushed stone, weathered soil, and crushed-rock soil mixture. The model is composed with the maximum Young's modulus and nonlinear values for higher strain in parallel with dynamic shear modulus. The maximum values is modeled by model parameters, $A_E$ and the power of mean effective principal stress, $n_E$. The nonlinear portion is represented by modified hyperbolic model, with the model parameters of reference strain, ${\varepsilon}_r$ and curvature coefficient, a. To assess the performance of the prediction models proposed herein, the elastic response of a test trackbed near PyeongTaek, Korea was evaluated using a 3-D nonlinear elastic computer program (GEOTRACK) and compared with measured elastic vertical displacement during the passages of freight and passenger trains. The material types of sub-ballasts are crushed stone and weathered granite soil, respectively. The calculated vertical displacements within the sub-ballasts are within the order of 0.6mm, and agree well with measured values with the reasonable margin. The prediction models are thus concluded to work properly in the preliminary investigation.