• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.8
• /
• pp.1220-1226
• /
• 2001

This study investigates the effects of the pre-strain level on mechanical properties of the solid-phase formed thermoplastic composite. A uniaxial solid-phase forming was performed at the temperature of 125$\^{C}$ and at the constant cross-head speed of 3mm/sec. The composite sheet was formed to various pre-strain levels of 10%, 20%, and 30%. Tension, flexural, and impact tests were carried out to characterize the material properties of a solid-phase formed part. Tensile and flexural strengths decreased with increasing the pre-strain level, while impact strength increased. Various microstructures of the formed part explained the above material behavior.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1250-1264
• /
• 2023

This paper presents approximate in-depth residual stress and plastic strain profiles for laser-peened alloy 600 surface via FE analysis. In approximations, effects of the initial welding residual stress and the number of shots are quantified. Based on FE analysis results, residual stress profiles are quantified by two variables; the maximum difference in stress before and after LSP, and the depth up to which the compressive residual stress exists. Plastic strain profiles are quantified by one variable, the maximum equivalent plastic strain at the surface. The proposed profiles are validated by comparing with published LSP experimental results for welded plates. Effects of the initial welding residual stress and the number of shots on these variables are discussed. The proposed profile can be directly applied to predict the mitigation effect of LSP on PWSCC and to efficiently perform structural integrity assessment of laser peened nuclear components.

• Journal of the Korean Society of Combustion
• /
• v.17 no.3
• /
• pp.17-29
• /
• 2012

The effects of strain rate and preferential diffusion of $H_2$ on flame extinction are numerically studied in interacting premixed syngas-air flames with fuel compositions of 50% $H_2$ + 50% CO and 30% $H_2$ + 70% CO. Flame stability diagrams mapping lower and upper limit fuel concentrations at flame extinction as a function of strain rate are examined. Increasing strain rate reduces the boundaries of both flammable lean and rich fuel concentrations and produces a flammable island and subsequently even a point, implying that there exists a limit strain rate over which interacting flame cannot be sustained anymore. Even if effective Lewis numbers are slightly larger than unity on extinction boundaries, the shape of the lean extinction boundary is slanted even at low strain rate, i.e. $a_g=30s^{-1}$ and is more slanted in further increase of strain rate, implying that flame interaction on lean extinction boundary is strong and thus hydrogen (as a deficient reactant) Lewis number much less than unity plays an important role of flame interaction. It is also shown that effects of preferential diffusion of $H_2$ cause flame interaction to be stronger on lean extinction boundaries and weaker on rich extinction boundaries. Detailed analyses are made through the comparison between flame structures with and without the restriction of the diffusivities of $H_2$ and H in symmetric and asymmetric fuel compositions. The reduction of flammable fuel compositions in increase of strain rate suggests that the mechanism of flame extinction is significant conductive heat loss from the stronger flame to ambience.

• Composites Research
• /
• v.23 no.3
• /
• pp.64-68
• /
• 2010

Expanded polystyrene(EPS) foams are often used in packaging to protect electrical appliances from impact loads. The energy absorbing performances of the EPS foams depend on several parameters such as density, microstructure and strain rate. Thus, the effects of the parameters on the strength of the EPS foams need to be investigated for an optimized packaging design by FEM. In this study, various EPS foams which have different densities were quasi-statically and dynamically loaded in order to obtain the stress-strain curves. EPS foams of various densities from 18.5 to 37.0kg/m3 were considered in the experiments. A drop-mass type apparatus was developed for the intermediate strain rate tests up to several hundreds/second. It was found from the experimental results that the strength of the EPS foams increase about 170% as the strain rate increases from 0.06/s to 60/s. Experimental results also showed that the strain rate sensitivity increases as the strain increases.

• Child Health Nursing Research
• /
• v.11 no.4
• /
• pp.472-480
• /
• 2005

Purpose: Purpose of this study was to identify the effects on maternal role strain, maternal role confidence and maternal identity of a maternal role promotion program for mothers of premature infants. Method: A quasi-experimental non-equivalent pre-and-post test was used to compare the two groups. The data were collected from 62 mothers from September 10. 2003 to August 30, 2004 at Neonatal Intensive Care Unit(NICU) located in S. city and K. city. The maternal role promotion program was provided three times during the period from two-three days after the baby's admission to 1 month after the baby's discharge. The instruments for measurement were the Perceived Role Difficulty & Steffensmeier Scale, Self Confidence Scale and Semantic Differential Scale. Data were analyzed by means of frequency, mean and SD, $x^2$-test and t-test. Results: There were significant differences in maternal role strain level between the experimental and control group (t=2.163, p=.035), in the maternal role confidence between the two groups(t=-5.645, p=.000) and in maternal identity between the two groups(t=-4.923, p=.000). Conclusion: The results of this study indicate that the maternal role promotion program had positive effects in decreasing maternal role strain levels and increasing maternal role confidence and maternal identity.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.3
• /
• pp.95-100
• /
• 2004

This paper reports a potential problem in the electrical performance of the silicide film to silicon contacts with respect to the scaling trend in integrated circuit (IC) devices. The effects of elastic strain on the agglomeration of the coherent silicide film embedded in an infinite matrix are studied employing continuum linear elasticity and finite-difference numerical method. The interface atomic diffusion is taken to be the dominant transport mechanism where both capillarity and elastic strain are considered for the driving forces. Under plane strain condition with elastically homogeneous and anisotropic system with cubic symmetry, the dilatational misfit and the tetragonal misfit in the direction parallel to the film thickness are considered. The numerical results on the shape evolution agree with the known trend that the equilibrium aspect ratio of the film increases with the elastic strain intensity. When the elastic strain intensity is taken to be only a function of the film size, the flat film morphology with a large aspect ratio becomes increasingly unstable since the equilibrium aspect ratio decreases, as the film scales. The shape evolution results in a large decrease in contact to silicon area, and may deteriorate the electrical performances.

• The Journal of Korean Physical Therapy
• /
• v.31 no.4
• /
• pp.254-259
• /
• 2019

Purpose: This study examined the interactions between the job strain and social support in the workplace on the development of workrelated neck pain in office workers. Methods: The participants included 62 office workers without neck pain over the last twelve months. A battery of measures evaluating the potential workplace risk factors in office settings were conducted at the baseline, and at the 12 month incidence of work-related neck pain was reported via monthly questionnaires. Survival analysis evaluated the interaction effect between job strain and social support on the development of work-related neck pain. Results: The incidence of work-related neck pain was 1.91 (95% CI: 1.06 - 3.45) per 100 person months. The interaction effect between job strain and social support found that job strain may increase the risk of developing new work-related neck pain when lower social support existed in the workplace. On the other hand, the adverse effects of job strain on the development of neck pain were not significant when workers had higher social support from their colleagues and supervisors. Conclusion: An investigation of the moderating effects of risk factors on neck pain might reveal the unexplained relationship between the risk factors for the development of neck pain in office workers. Therefore, the interest in prevention plans and treatments should involve a comprehensive understanding of the risk factors at workplace.

• Structural Engineering and Mechanics
• /
• v.81 no.5
• /
• pp.575-589
• /
• 2022

In order to enhance the greenness in the strain-hardening composites and to reduce the high cost of typical polyvinyl alcohol fiber reinforced engineered cementitious composite (PVA-ECC), an affordable strain-hardening composite with green binder content has been proposed. For optimizing the strain-hardening behavior of cementitious composites, this paper investigates the effects of polypropylene fibers on the first cracking strength, fracture properties, and micromechanical parameters of cementitious composites. For this purpose, digital image correlation (DIC) technique was utilized to monitor crack propagation. In addition, to have an in-depth understanding of fiber/matrix interaction, scanning electron microscope (SEM) analysis was used. To understand the effect of fibers on the strain hardening behavior of cementitious composites, ten mixes were designed with the variables of fiber length and volume. To investigate the micromechanical parameters from fracture tests on notched beam specimens, a novel technique has been suggested. In this regard, mechanical and fracture tests were carried out, and the results have been discussed utilizing both fracture and micromechanical concepts. This study shows that the fiber length and volume have optimal values; therefore, using fibers without considering the optimal values has negative effects on the strain-hardening behavior of cementitious composites.

• Korean Journal of Microbiology
• /
• v.28 no.2
• /
• pp.145-150
• /
• 1990

The effects of environmental factors on degradation of Aroclor 1242 were investigated with four Gram-negative bacterial isolates. Their biodegradabilities of the Aroclor were well correlated to their growth rates on the Aroclor added as a sole carbon and energy source. The optimum concentration of the Aroclor for biodegradation of the substrate in MM2 medium was 0.5mg/ml in HK-100, HK-123, and MS-1003 strains, but 1 mg/ml in DJ-26 strain. The optimum temperature and pH were $30^{\circ}C$ and 7.0, respectively, for all the strains. On the basis of the results which the strain of DJ-26 showed the highest degradability of the Aroclor as well as the highest growth rate under the optimum environmental conditions, the bacterial isolate identified as Pseudomonas sp. was found to be a strain usable for treatment of the toxic and recalcitrant chemical pollutants, such as polychlorinated aromatic hydrocarbons.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.1
• /
• pp.67-73
• /
• 2009

The stress-strain behavior and its effects on the crack initiation and growth of ITO film on PET substrate with a sheet resistance of 45 ohms/sq were investigated. Electrical resistance increased gradually at the strain of 0.7% in the elastic to plastic transition region of the stress strain curves. Numerous cracks were observed after 1% strain and the increase of the resistance can be linked to the cracking of ITO thin films. The onset strain for the increase of resistance increased with increasing strain rate, suggesting the crack initiation is dependent on the strain rate. Upon loading, the initial cracks perpendicular to the tensile axis were observed and propagated the whole sample width with increasing strain. The spacing between horizontal cracks is thought to be determined by the fracture strength and the interfacial strength between ITO and PET. The crack density increased with increasing strain. The spacing between horizontal cracks (perpendicular to the stress axis) increased with decreasing strain rate, The increase of crack density with decreasing strain rate can be attributed to the higher fraction of the plastic strain to the total strain at a given total strain. As the strain increased over 5% strain, cracks parallel to the stress axis were developed and increased in number with strain, accompanied by drastic increases of resistance.