• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.448-456
• /
• 2010

The mechanical behavior of granular soils is affected by particle bonding including natural cementation. This study addresses a simple model of small strain stiffness and salt concentration based on wave measurements of salt-cemented particulate media. Published models of artificially cemented soils with different curing methods and several types of cementation agents are reviewed. Glass beads with the median diameter of D50 = 0.5mm are prepared in rectangular cells using the water-pluviated method in salt water with different concentrations. Piezo disk elements and bender elements embedded in the cell are used for the measurements of compressional and shear waves. The relationships between elastic wave velocities and salt concentration show an exponential function. The measured small strain stiffness matches well the predicted small strain stiffness based on micromechanics for simple cubic monosized sphere particles. This study demonstrates that the salt concentration in salt-cemented specimen may be evaluated by using elastic wave velocities.

• Journal of Life Science
• /
• v.18 no.7
• /
• pp.947-951
• /
• 2008

Zinc is an essential trace element participating in many physiological functions and notably an important function for sperm physiology. Zinc-enriched yeast strain, Saccharomyces cerevisiae, isolated from tropical fruit rambutan. This strain contained 306 ppm zinc concentration and other components contained by K 28,640 ppm, Mg 2,342 ppm, Na 1,048 ppm, Ca 366 ppm, Fe 236 ppm and Mn 4 ppm. The serum concentration of testosterone was decreased in ethanol treatment rats. As compared with ethanol treated control rats, the zinc-enriched yeast strain supplementation showed significantly increased the testosterone concentration in serum. In addition, zinc concentration in serum was decreased in alcohol treatment, but this reduction was significantly increased by zinc-enriched yeast strain supplementation in ethanol feeding rats. These results indicate that zinc-enriched yeast Saccharomyces cerevisiae strain could play an important role in the sperm physiology by the marked elevation of serum testosterone concentration.

• Journal of Environmental Health Sciences
• /
• v.23 no.1
• /
• pp.18-27
• /
• 1997

The isolation, morphological study and growth characteristics of the algae were investigated from Lake Chuam. The isolated algae were applied the Agal Growth Potential test. The method of isolation and purification of the algae were used to Agar plating(AP), nutrient enrichment(NE), dilution(DI) and micro capillary technique(MC). Total isolated algae were 21 species. They were composed of Cyanophyceae, Dinophyceae, Bacillariophyceae, Euglenophyceae and Chlorophyceae. The numbers of algal strain by isolation technique were highest in dilution(21 species), and those of the rests were showed in order of NE > MC > AP. The sizes of isolated Selenastrum and Scenedesmus were $1.8\pm 1.4 \mu m$, $3.3\pm 0.9 \mu m$ in diameter and $6.4\pm 2.3 \mu m$, $13.6\pm 1.9 \mu m$ in length respectively. The morphology of isolated algae and NIES-collection strain was very similar each other, but the size was smaller isolated algae than that of NIES-collection. The optimum culture condition of isolated Selenastrum and Scenedesmus was about 30$\circ$C(25$\circ$C-35$\circ$C) in temperature and the maximum growth was appeared between 7,000 lux and 8,000 lux in the light intensity. The comparison of $\mu$(specific growth rate) on the concentration of nutrients such as nitrate and phosphate, isolated Selenastrum was appeared maximum it at 1.0 mg $NO_3-N/l$ but NIES-collection strain was showed 95% of maximum it at same nitrate concentration. Maximum g of isolated algae and NIES-collection strain in Scenedesmus onto nitrate concentration were very similar with the result of selenastrum. The specific growth rates of isolated algae and NIES-collection strain on the gradient concentration of phosphate were showed 0.72/day and 0.70/day at 0.02 mg $PO_4-P/l$ in Selenastrum but those of Scenedesmus were appeared 0.61/day and 0.57/day at same concentration $PO_4-P$.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.7
• /
• pp.1068-1077
• /
• 2006

Pseudomonas sp. PhCN strain, which has the potential to utilize phenol and cyanide as a sole carbon and nitrogen source, was isolated. A comparison of the effect of cyanide on phenol degradation and vice versa by strain PhCN showed that the degradation time was significantly delayed by an increase in either phenol or cyanide concentration, and the greatest activities were obtained in basal medium containing a low concentration of cyanide and phenol. This strain contained two plasmids of approximately 120 kb (pPhCN-1) and 110 kb (pPhCN-2). Plasmid curing experiments produced a plasmid-free strain as well as strains containing either the 120- or the 110 kb plasmid. The strains were tested for their ability to utilize phenol and KCN. The results demonstrated that the ability to utilize phenol was encoded by the 120 kb plasmid, whereas the ability to utilize cyanide appeared to be encoded by the chromosome.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.4
• /
• pp.87-94
• /
• 2010

When occlusal force is applied to a tooth, stress concentration occurs on the dental cervical line. This study investigated to find the maximum force and strain of natural teeth using an Instron and strain gauges, comparing the strain of cervical enamel using finite element analysis(FEA). Tests were conducted with a mandibular first premolar applying the conditions of occlusion. Then, the FEA was processed with the same as conditions of the fracture test. The test showed that the maximum force, maximum compressive strain and maximum tensional strain was $278{\pm}26$ N, $0.668{\times}10^{-3}{\pm}0.678{\times}10^{-3}$ and $0.248{\times}10^{-3}{\pm}0.102{\times}10^{-3}$, respectively. It was found that six of eight measured strains were within the range of estimated strains by the FEA. Even though it was assumed that properties of FE models were isotropic, it could prove useful as a reference in understanding the tendency of dental strain.

• Food Science and Biotechnology
• /
• v.17 no.6
• /
• pp.1207-1213
• /
• 2008

The possible protective effects of highly zinc-containing yeast Saccharomyces cerevisiae, FF-10 strain, isolated from tropical fruit rambutan on acute alcoholic liver injury in rats were evaluated. Zinc concentration in this strain was 30.6mg%. The activities of serum alanine aminotransferase (ALT), aspartate aminotransferase (AST), and $\gamma$-glutamyl transpeptidase ($\gamma$-GTP) were highly increased when alcohol was treated, relative to the normal rats. Also, a highly significant increase in the blood alcohol and acetaldehyde levels by alcohol treatment was observed. Administration of FF-10 strain markedly prevented alcohol-induced elevation of the activities of serum ALT, AST, and $\gamma$-GTP, and the levels of blood alcohol and acetaldehyde, and these reduced levels reached to that of normal rats. As compared with alcohol treated control rats, the FF-10 strain supplementation showed highly decreased the triglyceride concentration in serum. Alcohol treatment induced the marked accumulation of small lipid droplets, hepatocytes necrosis, and inflammation, but FF-10 strain administration attenuated to alcohol-induced accumulation of small lipid droplets and hepatocyte necrosis in the liver. Therefore, the current finding suggests that zinc-enriched yeast FF-10 strain isolated from tropical fruit rambutan may have protective effect against alcohol-induced hepatotoxicity.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.5
• /
• pp.329-335
• /
• 2006

It is necessary to study on the stress concentration experimentally, which is the main reason to avoid mechanical dilapidation and failure, when designing a mechanical structure. Stress concentration factor of a specimen of cantilever beam with a circular hole in the center was measured using both strain gage and photoelastic methods in this paper. In strain-gage measurement, three strain gages along the line near a hole of the specimen were installed and maximum strain was extrapolated from three measurements. In photoelastic measurement, two methods were employed. First, the Babinet-Soleil compensation method was used to measure the maximum strain. Secondly, photoelastic 4-step phase shilling method was applied to observe the strain distribution around the hole. Measurements obtained by different experiments were comparable within the range of experimental error.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.6
• /
• pp.1211-1216
• /
• 2004

A MNNG (N-methyl-N'-nitro-N-nitrosoguanidine) induced chromium resistant strain ($Cr^{r}18$) of unicellular cyanobacterium Anacystis nidulans has been isolated and characterized. The resistant strain could grow (although restricted to $50\%$ of control) in chromium concentration (180${\mu}M$) lethal to the wild-type. Sublethal ($160{\mu}M$) concentration of $Cr^{6+}$ significantly reduced (13-$37.5$) all the photosynthetic pigments of A. nidulans with maximum reduction in phycoerythrin followed by ChI $\alpha$. Pigments of A. nidulans were drastically decreased in lethal concentration of Cr^{6+} with maximum reduction in phycoerythrin ($75\%$) and allophycocyanin ($67.5\%$). Resistant strain $Cr^{r}18$ resisted toxic effects of sublethal and lethal concentrations of $Cr^{6+}$ on photosynthetic pigments as revealed by less decrease in pigments as compared to A. nidulans. Effect of $Cr^{6+}$ stress was also studied on nitrogen assimilation and phosphate uptake. Sublethal concentration of $Cr^{6+}$ drastically reduced ($71.5\%$) nitrate uptake by A. nidulans while a decrease of $29\%$ was observed in strain $Cr^{r}18$. Short (2 day) exposure of A. nidulans and its resistant strain $Cr^{r}18\;to\;Cr^{6+}$ did not affect nitrate reductase and glutamine synthetase (transferase), whereas longer (10 day) exposure to $Cr^{6+}$ lowered activities of both enzymes in A. nidulans but not significantly in the strain $Cr^{r}18$. Ammonium uptake by both strains was not affected by $Cr^{6+}$. Thus, $Cr^{6+}$ affected photosynthetic pigments, nitrogen assimilation, and phosphate uptake of A. nidulans, while strain $Cr^{r}18$ was able to resist toxic effects of the metal. Advantages of using strain $Cr^{r}18$ for bioremediation purposes have been evaluated by studying $Cr^{6+}$ removal from the solution. Resistant strain $Cr^{r}18$ was able to remove $33\%$ more $Cr^{6+}$ than A. nidulans and thus it can prove to be a good candidate for bioremediation of $Cr^{6+}$ from polluted waters.

• Journal of the Korean Professional Engineers Association
• /
• v.19 no.4
• /
• pp.5-10
• /
• 1986

On SWS 41 Plates jointed by the F11T M 20 high strength bolts the study on stress behavior and safety degree until rupture in static tensile tests were performed. By these results, in case of no clamping force stress concentration was extremed for strain of about 10% higher ratio. Elastic strain occurred to change of test specimens depth by the load and plastic strain occurred to local minute sleep after elastic strain. compared shear stress with tension stress from the fracture load it was showned lower values than the maximum shear stress theory and stress strain energy theory.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.150-153
• /
• 2001

In this paper, the tensile test of three kinds of the specimens was performed. Type I specimen is without notch and type II, III specimens have a radius of semi-circular edge crack of 2.5mm, 4.0mm. The tensile load(20kN and 30kN) was applied to the specimen by Universal Testing Machine. 3D-ESPI system and strain gauge measured simultaneously the strain in the center of the specimen and near the edge crack. The test results were compared with each other. Moreover, the stress concentration factor based on geometric information was calculated to confirm the accuracy of the strain measured by 3D-ESPI system. The calculated strain was compared with the measured one by 3D-ESPI system. As a result, it was confirmed that 3D-ESPI system measured the right strain near the semi-circular edge crack of the specimens.