• 한국의류산업학회지
• /
• 제6권2호
• /
• pp.221-228
• /
• 2004

The purpose of this study was to compare somatotypes from various classification methods, to analyze the interrelation among each somatotype or each high frequency type, and to suggest the basis to interpret body size and shape more accurately. As a sample, the subjects were 97 Korean females between 18 and 24 years old. They were measured both anthropometric and photographic measuring in November, 1999. Their somatotypes were classified by three kinds of classification methods. The first method was based on the lateral view of body, the second involved Factor and Cluster analysis with the photographic measurements of anterior and lateral body, and the third involved Factor and Cluster analysis with the anthropometric measurements of whole body. The upper body was classified into three types, and the lower body was classified into 6 types from the lateral view of body. The bend-forward/q-2 was found to be the 'High-frequency type from the lateral view of body', and the Straight/n-1 was found to be the 'Straight type from the lateral view of body'. From the classification by the analysis of photographic measurements, the anterior body was classified into three types, the lateral was classified into 4 types. The X/${\varepsilon}$ type was found to be the 'High-frequency type from the analysis of photographic measurements of anterior and lateral body'. From the classification by the analysis of anthropometric measurements, the whole body was classified into three types. The i type was found to be the 'High-frequency type from the analysis of anthropometric measurements of whole body'. The significant interrelation was certified among some somatotypes or some High-frequency types. We found that both the view of body and the statistical analysis would make the clear definition of each somatotype possible. In order to certify the representativeness of High-frequency type, further analysis would be required of subjects who were in the High-frequency type and their body parts were in the High-frequency range.

• 대한치과보철학회지
• /
• 제55권1호
• /
• pp.9-17
• /
• 2017

목적: 내부 연결형과 외부 연결형의 임플란트에서 직선형과 경사형 지르코니아 지대주의 파절강도를 비교하였다. 재료 및 방법: 내부육각 연결형 임플란트 20개와 외부육각 연결형 임플란트 20개에, 기성 직선형 지르코니아 지대주와, $17^{\circ}$ 경사형 지르코니아 지대주를 10개씩 체결하였다. 시편은 연결 방식과 지대주 각도에 따라 4개의 군으로 나누었다: 내부 연결형/ 직선형 지대주, INS군; 내부 연결형/ 경사형 지대주, INA 군; 외부 연결형/ 직선형 지대주, EXS 군; 외부 연결형/ 경사형 지대주, EXA 군. 모든 시편은 만능시험기에서 1 mm/min의 crosshead speed로 $30^{\circ}$ 하중을 가했다. 지대주의 파절강도를 측정하고, 2-way ANOVA와 independent t-test로 통계처리 하였다(${\alpha}=.05$). 결과: 각 군의 평균파절강도는 다음과 같다: INS군, 955.91 N; INA군, 933.65 N; EXS군, 1267.20 N; EXA군, 1405.93 N. 외부 연결형이 내부 연결형에 비해 파절강도가 높았다(P < .001). 내부연결형(P = .747)과 외부 연결형(P = .222)에서 지대주 각도에 따른 파절강도는 차이가 없었다. 또한 내부 연결형 지대주는 육각 부위에서 수평 파절이 일어난 반면, 외부 연결형 지대주는 설측 치경부에서 파절되었다. 결론: 외부 연결형 지르코니아 지대주가 내부 연결형 지대주에 비해 파절 강도가 높았고, 직선형과 경사형 지르코니아 지대주의 파절강도는 차이가 없었다.

• 패션비즈니스
• /
• 제11권1호
• /
• pp.61-74
• /
• 2007

Photographic measurement was first made with the subjects of 190 males in their 20s residing in the Ningbo area, Zhejiang Province in China. In this second report, lower body shapes were classified and discriminated by using indirect measurement, measurement items, and lower body analysis. The following sums up the research: 1. The subjects were $8.85^{\circ}$ (hip breadth angle), $1.58^{\circ}$ (abdomen upper angle), $11.80^{\circ}$ (hip upper angle), and $5.12^{\circ}$ (lateral lower body posture angle). 2. The subjects of Chinese males in their 20s showed three types of lower bodies: Bow Legs & Slight Slant of Lateral Lower Body Type (30.5%)-gap between legs, curve waist-hip contour, average abdomen-hip profile, and lateral lower body posture were slightly slanted forward. Adjacent Straight Legs & Slight Slant of Lateral Lower Body Type (35.8%)-adjacent straight between legs, curve waist-hip contour, slim abdomen-hip profile, and lateral lower body posture were slightly slanted forward. Balance Legs & Large Slant of Lateral Lower Body Type (33.7%)-average between legs, straight waist-hip contour, protruding hip profile, and lateral lower body posture were largely slanted forward. 3. Eight useful variables for the categorization of the subjects' lower body types were chosen through stepwise discriminant analysis, and the hit ratio of discrimination was 97.9%.

• 한국생활과학회지
• /
• 제8권3호
• /
• pp.551-563
• /
• 1999

In this study, university students were allowed to wear the slacks varying the thigh circumference(slim/straight type) and crotch length(long, middle, short crotch type). Tightness and uncomfortability for each slacks were measured to be expressed 5point-likert type. The results can be summarized as follows: 1. At the research for measuring uncomfortability, measures of slim types and straight types of thigh circumference, crotch length B and C, and the body movement such as sitting down on the chair, sitting down with their body curling like a ball, and getting down on their knees were higher in slim types than in straight types. 2. Only crotch length C had different measures between these two types in tightness. 3. In uncomfortability, each of them had different measures among three kinds of crotch length and two types of thigh circumference had different measures among three kinds of crotch length. Four kinds of movement had different measures among three kinds of crotch length in uncomfortability. While uncomfortability of crotch length B was the highest one, that of crotch length A was the lowest one. 4. In tightness, each of them had different measures among three kinds of crotch length. While tightness of crotch length C was the highest one, that of crotch length A was the lowest one. Four kinds of movement had different measures among three kinds of crotch length in tightness.

• Steel and Composite Structures
• /
• 제47권1호
• /
• pp.51-69
• /
• 2023

In tied-arch bridges, a properly designed connection between the arch and the deck may become crucial, since the forces in the structure may be significantly reduced. This implies substantial material savings and, consequently, cheaper constructions. The introduction of the Nielsen cable arrangement (composed of V-shaped inclined hangers) in the last century was a milestone because it was able to reduce deflections and bending moments both in the arch and in the deck. So far, the Nielsen cable arrangement has proven to be successful in traditional vertical arch bridges. However, despite its advantages, it has not been widely applied to spatial arch bridges. Thus, this article analyses the difference between the structural behavior of spatial arch bridges with Nielsen-type cable arrangements with respect to those with classical vertical hanger configurations. The main goal is to verify whether the known effectiveness of the Nielsen cable arrangement for classical arch bridges is still preserved when applied to spatial arch bridges. In order to achieve this objective, and as the first part of our study, a set of different all-steel bridges composed of vertical and inclined arches with straight decks have been compared for both cable arrangements. As a major conclusion, for planar vertical arch bridges, the Nielsen-type cable arrangement is always the most effective. In addition, it also seems that, for spatial arch bridges composed of a straight deck and an inclined arch, it still keeps most of its effectiveness as long as the arch is moderately inclined.

• 한국산학기술학회논문지
• /
• 제14권7호
• /
• pp.3151-3157
• /
• 2013

본 연구에서는 전자부품 및 소형 플라스틱제품에서 많이 사용하는 리브(rib) 가공에 있어 기존 플렛형 2날(2F)공구와 외날형 공구(1F)의 비교실험을 통해 다음과 같은 결과를 얻었다. 직선가공의 표면거칠기 및 공구마모는 기존 플렛형의 스트레이트 구조를 갖는 공구가 좋은 결과를 보였다. 깊이 7mm 리브 가공이 기존 공구에 비해 개발공구의 표면거칠기가 약 50%정도 양호하게 나타났다. 가공시간 또한 리브 형상별 차이는 있을 수 있으나, 기존 공구에 비해 약 3배 정도 빠르게 가공할 수 있었다.

• 한국의류산업학회지
• /
• 제8권3호
• /
• pp.310-316
• /
• 2006

Fitness of clothes becomes a major concern in apparel industry. But male sports athletes had difficulties to buy ready-made clothes of good fit. Because ready-made clothes manufactured in companies are produced accordingly to the general person's body types. To solve this problem, it is necessary to classify athletes' upper body into several kinds of somatotypes. The purpose of this study was to classify upper body types of male sports athletes based on the analysis of their upper body types and to provide fundamental data on the development of ready-to-wear clothing appropriate for the upper body types. The subjects for anthropometric measurement were 189 male sports athletes of 20 to 29 year-old. The result of factor analysis indicated that 6 factors were extracted from anthropometric measurements through analysis and those factors comprise 73.807% of total variance. 3 clusters were categorized using 6 factor scores by cluster analysis. Type 1 was taller than other types, had average size in circumference, width and thickness and was bending somatotype. Type 2 exhibits a large circumference in the upper body and straight somatotype. Type 3 was characterized by short, exhibits a large circumference in waist, abdomen and hip and swayback somatotype.

• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.157-165
• /
• 2017

The high-pressure resin transfer molding (HP-RTM) technology has been commercialized for fast production of fiber reinforced composite materials. The high-pressure mixing head was one of the most core component of the HP-RTM process. In this study, a mixing head was systematically designed, manufactured and evaluated. This mixing head was composed of a nozzle, a mixing chamber, a cleaning piston part, and an internal mold release part. In actual, a straight-type structure was newly designed instead of the conventional L-type structure for improving the maximum mixing pressure and mixing ratio precision. The performance of mixing head was showed maximum mixing pressure of 15.22MPa and mixing ratio precision of 0.12%. CFRP molding experiments were successfully obtained a 6~11 laminating carbon sheet using HP-RTM presses and specimen molds.

• 한국화재소방학회논문지
• /
• 제30권1호
• /
• pp.49-56
• /
• 2016

본 논문에서는 동절기 소방배관의 동파방지를 위한 열선의 직선 시공과 감기 시공의 효과를 수치해석을 통하여 분석하였다. 두 시공법들의 효과 분석을 위하여 3차원 에너지방정식과 비정상 비압축성 Navier-Stokes 방적식의 비정상 해를 구하였다. 수치해석에서 물의 자연대류와 소방 배관의 열전도 방정식이 상호작용을 하므로 복합열전달 해석을 상용코드 ANSYS-FLUENT에서 제공하는 압력-속도 연성기법들 중의 하나인 SIMPLE 알고리즘을 이용하여 수행하였다. 수치해석을 통하여 시간에 따른 배관 내의 유동장 및 온도분포와 배관 내 물의 최대 및 최소온도 변화를 고찰하였다. 수치해석 결과 배관 단위 길이 당 투입열량이 동일한 경우에 감기 시공과 직선 시공의 동파방지 효과는 거의 동일함을 확인하였다. 따라서, 열선 손상과 단락 등을 고려하면 직선 시공이 더 나은 시공법이라 판단된다.

• 한국의상디자인학회지
• /
• 제15권2호
• /
• pp.1-13
• /
• 2013

The study is to provide basic data on improving costume's fitting by developing physical integrated Basic Bodice Block's development for body types of adult women, which is based on setting up body-type information per truncus as fundamental of adult women's top product manufacture in being ready for Mass Customization era. Also, after review on the objectivity and accuracy of fitting information by real wear and virtual wear experiment on body types, not only 3D virtual clothing system was used as way of information provider of Clothing product, but also provided as basic data in order to use effectively on portion of clothing passion in responding to trend of Mass customization in advance. The consequence of the study is as followings. After analyzing significance differences per items on real and virtual wear evaluation, bowed type of type 1 had significance differences on waist measurement and hip circumference in back and side, which would be knowing as not integrated with costume, affecting form of human body according to virtual wear system bended on back region. Also, in side evaluation, every types except straight body type of type 3 appeared significant differences. In virtual wear evaluation, costume's expression with side body types were not similar to real wear until now except straight body types. It would be improvement things from 3D virtual wear system in advance.