Browse > Article
http://dx.doi.org/10.5762/KAIS.2013.14.7.3151

Study on the characteristics of the rib mold processing using a single type of tool  

Lee, Seung-Chul (Dept. of Naval Architecture & Mechanics, Chosun College of Science & Technology)
Park, Suk-Chul (Mansun Hi-Tec co., Ltd.)
Publication Information
Journal of the Korea Academia-Industrial cooperation Society / v.14, no.7, 2013 , pp. 3151-3157 More about this Journal
Abstract
Rib cutting is being used to many electronic components and small plastic products. In this study, comparison experiment on tool of flat type(2F) and single edge type(1F) was conducted. Results were as follows: Surface roughness and tool wear of straight cutting showed good results in tool with a straight structure of the Existing tool. Rib cutting of 7mm depth was shown 50% higher surface roughness of development tool than the existing tool. The cutting time varies depending on the shape of the rib. But it is three times faster compared to existing tool.
Keywords
Cutting; Cutting time; Surface roughness; Number of flutes; NAK80;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 E. S. Song, "Design Alteration of a Jig Boring Machine Structure for the Improved Stability", M. S. Thesis, Mechanical Engineering, Kum-oh University of Technology, pp. 1-3, 2009.
2 S. K. Min, S. W. Lee, D. J. Lee, E. S. Lee, T. J. Jae, "A Study on the Machining Characteristics for Micro Barrier Ribs", Journal of KSMTE, Vol. 1, No. 3, pp. 14, 2002   과학기술학회마을
3 C. M. Shin, "Surface Characteristic Monitoring in Magnetic Abrasive polishing of NAK80 Material Using AE Sensor and Neural Network" M. S. Thesis, Pukyong National University", pp. 20, 2012
4 D. S. Shin, J. H. Lee, Y. P. Kim, "Laser Polishing of NAK80 Mold Steel", Proceeding of the KSMTE Spring conference, pp. 31, 2012
5 K. N. Kim, "Components Analysis of Surface Roughness in Turning Process by Frequency Analysis" Journal of the KSNT, Vol. 16, No. 3 pp. 184, 1996   과학기술학회마을