• 수산해양기술연구
• /
• 제47권4호
• /
• pp.344-355
• /
• 2011

We conducted experiments to compare the catch rate of bigeye tuna and yellowfin tuna between circle hooks and straight shank hook in the Korean tuna longline fishery at the eastern and central Pacific Ocean from 2005 to 2007. We analyzed difference of fork length, survival and hooking location between a circle hook and a straight shank hook for both tunas, respectively. There was no difference in the mean fork length size of yellowfin tuna caught on the two type of hook but bigeye tuna was significant. In case of survival, there was no difference between two hook type, but the difference of hooking location was significant for both species. We also analyzed to find determinants of both tunas catch rate using generalized linear models (GLMs) which were used latitude, longitude, year, month, depth, hook type, bait type and so on as independent variables. Spatial factors, latitude and longitude, and temporal factors, year and month, affected catch rate of bigeye tuna and yellowfin tuna. And also, depth such as a marine environment factor was influenced on catch rate.

• 한국의류산업학회지
• /
• 제4권1호
• /
• pp.71-78
• /
• 2002

The purpose of this study was to classify body types of 800 female junior and high school students based on factor analysis, cluster analysis, and correspondence analysis of 15 photometric measurements of the subjects' lateral body lines. The results are as follows: The skeleton structure, which was represented the back bending by the photometric measurement, was already formed at age of 12 or 13, while the cervical skeleton, the size and inclination of the shoulder, and the degree of the lateral inclination of the upper body and the buttocks continued to grow by the age of 16. A factor analysis of the photometric measurement resulted in the sampling which determined the degree of the back bending, front-bust angle, and lateral view as well as the sampling whose factor represented the cervical inclination. A cluster analysis of the photometric measurement resulted in the four types of classification: Type 1, the straight type comprising 13.3% of the whole population; Type 2, the bent-forward type comprising 39.5%; Type 3, the lean-back type comprising 27.4%; and Type 4, the swayback type comprising 19.1%. Accordingly, the bent-forward type was found to be the dominant type among the four lateral body types.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.923-928
• /
• 2003

This paper presents the motion control of a mobile robot with arc sensor for lattice type welding. Its dynamic equation and motion control method for welding speed and seam tracking are described. The motion control is realized in the view of keeping constant welding speed and precise target line even though the robot is driven along a straight line or comer. The mobile robot is modeled based on Lagrange equation under nonholonomic constraints and the model is represented in state space form. The motion control of the mobile robot is separated into three driving motions of straight locomotion, turning locomotion and torch slider controls. For the torch slider control, the proportional integral derivative (PID) control method is used. For the straight locomotion, a concept of decoupling method between input and output is adopted and for the turning locomotion, the turning speed is controlled according to the angular velocity value at each point of the comer with range of $90^{\circ}$ constrained to the welding speed. The proposed control methods are proved through simulation results and the results have proved that the mobile robot has enough ability to apply the lattice type welding line.

• Journal of Mechanical Science and Technology
• /
• 제16권1호
• /
• pp.83-93
• /
• 2002

This paper presents a motion control method and its simulation results of a mobile robot for a lattice type welding. Its dynamic equation and motion control methods for welding speed and seam tracking are described. The motion control is realized in the view of keeping constant welding speed and precise target line even though the robot is driven for following straight line or curve. The mobile robot is modeled based on Lagrange equation under nonholonomic constraints and the model is represented in state space form. The motion control of the mobile robot is separated into three driving motions of straight locomotion, turning locomotion and torch slider control. For the torch slider control, the proportional-integral-derivative (PID) control method is used. For the straight locomotion, a concept of decoupling method between input and output is adopted and for the turning locomotion, the turning speed is controlled according to the angular velocity value at each point of the corner with range of 90$^{\circ}$ constrained to the welding speed. The proposed control methods are proved through simulation results and these results have proved that the mobile robot has enough ability to apply the lattice type welding line.

• 복식
• /
• 제34권
• /
• pp.19-36
• /
• 1997

through Sid View Silhouette The purpose of this study was to pro-vide basic information for elderly women's clothing construction and to develop dress forms that can reflect the charac-teristics of their bodies. The subjects were 251 elderly women aged from 60 to 81. Data were collected from 34 photographic measurements of each subject and analyzed by factor analysis cluster analysis analysis of variance. The results were as follows: 1. A decrease in height the bustline drops as age increase. From a lateral view point most of the subjects have straight posture with protruding ab-domens but the somatotype gradually bends bends forward with age. 2) Five factors were extracted from photometric measurement which explain 81.0% of variance. 3 Through cluster analysis using 5 fac-tor scores four types were categorized. Type I was turning over somatotype Type II was swayback somatotype Type III was straight somatotype Type IV was bending somatotype according to its po-sition to the relative plumb liner and their side view contour.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.946-949
• /
• 2001

Mirror surface finish of Si-wafers has been achieved by rotary in-feed machining with cup-type wheels in ELID grinding. But the diameter of the workpiece is limited with the diameter of the grinding wheel in the in-feed machining method. In this study, some grinding experiments by the rotary surface grinding machine with straight type wheels were conducted, by which the possible grinding area of the workpiece is independent of the diameter of the wheels. For the purpose of investigating the grinding characteristics of large scale diametral silicon wafer, grinding conditions such as rotation speed of grinding wheels and revolution of workpiece are varied, and grinding machine used in this experiment is rotary type surface grinding m/c equipped with an ELID unit. The surface ground using the SD8000 wheels showed that mirror like surface roughness can be attained near 2~6nm in Ra.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.197-202
• /
• 2010

This study deals with the accident models of arterial link sections by driving type. The objectives is to develop models by driving type using the accident data of 24 arterial links in Cheong-ju. In pursuing the above, this study gives particular emphasis to modeling such the accidents as the straight, lane change and others. The main results analyzed are as follows. First, the number of accidents is analyzed to account for about 59% in straight, 31% in lane change and 10% in others. Second, the number of left-turn lane as common variables, and the ADT, number of pedestrian crossings, connecting roads and link length as specific variables are selected in developing models(number of accident and EPDO). Third, 8 models which are all statistically significant are developed. Finally, RMSE of the driving type models was analyzed to be better than that of dummy variable.

• 대한인간공학회지
• /
• 제28권2호
• /
• pp.35-55
• /
• 2009

The purpose of this study was to analyze the somatotypes of women in the early 20's, which were likely to deform due to bad posture in growth period. Accordingly, bodies of women aged 20 to 24, whose growth stopped, were measured directly and indirectly, and factors related to body shapes were extracted, body shapes were categorized based on the data, and the characteristics of each body shape were analyzed. As a result, 10 factors related to body shapes were extracted in the factor analysis, and body shapes were categorized into 6 types. Type 1 was the volume of body that was big and the longest; and the general frame was large. The straight body shape with small back protrusion; the shoulder is relatively thick and the width of the shoulder was normal. Type 2 was the volume of body that was the biggest and the upper body was the longest; the general frame was of average height. The forward body shape with the back flat; the shoulder was very thick, wide, and serious leaning forward. Type 3 was a body that was thin and the shortest. The sway-back body shape with big curvature at the back; the shoulder was thin, narrow, and straight. Type 4 was a body that was short stature, and the general frame was of average build. The forward body shape with the most serious back protrusion; the shoulder was normally thick, narrow, and straight. Type 5 was a group with small body, and the lower body and general frame are long. The sway-back body shape with protrusion at the upper shoulder and the sides leaning backward; the shoulder was thin, wide, and leaning forward. Type 6 was a thin and short body; and the general frame was small. The lean-back body shape with the smallest back protrusion and leaning backward; the shoulder was thin, narrow, and leaning backward. Characteristics of the classified body shapes can be used in producing ready-made clothes, and it is hoped that there will be follow-up studies on clothing pattern design and production based on this result.

• 한국어류학회지
• /
• 제24권4호
• /
• pp.247-252
• /
• 2012

한국산 송사리속 2종에 대한 섭이기관의 구조적 차이를 알아보기 위하여 악골 및 이빨 구조를 조사하였다. 악골에서 송사리 Oryzias latipes는 전상악골 중앙부의 등 쪽 가장자리에 움푹 들어가는 홈이 존재하였으나 대륙송사리 O. sinensis는 일직선이었다. 후반부의 위치에서 송사리는 중앙부와 일직선상에 존재하였으나 대륙송사리는 배 쪽에 존재하였다. 또한 송사리는 하악골의 구상돌기 아래로 이어지는 치골 뒷가장자리에 움푹 들어가는 홈이 존재한 반면에 대륙 송사리에서는 뒷가장자리가 일직선 모양을 하였다. 송사리는 성적이형으로서 수컷에서만 나타나는 큰 이빨이 하악골의 측면 방향으로 발달하였고, 대륙송사리는 등 쪽 방향으로 발달하였다. 한편 송사리의 이빨형태는 원뿔모양과 화살촉모양 2 types이 나타난 반면에 대륙송사리에서는 원뿔 모양 1 type만 나타나는 특징을 보였다. 이상과 같이 한국에 분포하는 2종의 송사리는 섭이기관에서 뚜렷한 종간의 특징을 잘 보여 주었다.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2120-2125
• /
• 2015

In this paper, a rectangular waveguide probe with a ridge-loaded straight slot (RLSS) is presented for a near-field scanning microwave microscope (NSMM). The RLSS is located laterally at the end wall of the cavity and is loaded on double ridges in a narrow straight slot to improve the spatial resolution compared with a straight slot. The probe consists of a rectangular cavity with an RLSS and a feed section of a WR-90 rectangular waveguide. When the proposed NSMM is located at distance of 0.1mm in front of a substrate without patches or strips, the simulated full width at half maximum (FWHM) of the probe improve by approximately 31.5 % compared with that of a straight slot without ridges. One dimensional scanning of the E-plane on a sample under test was conducted, and the reflection coefficient of the near-field scanning probe is presented.