• 한국운동역학회지
• /
• 제12권2호
• /
• pp.109-130
• /
• 2002

따라서 본 연구의 목적은 국가대표 수준급 대학 우수 야구 투수를 대상으로 한 3차원 영상분석을 통한 데이터를 가지고 직구 커브볼에 대한 구간별 운동학적 패턴을 비교 분석하여 자료를 제시하는데 있다. 본 연구는 부산 D대학교 우완 오버핸드 투수 가운데 국가대표 2명과 수준급 대학선수 2명, 총 4명을 대상으로 직구 커브 투구시 구간별로 나타나는 여러 운동학적 변인의 차이를 비교 분석한 결과 다음과 같은 결론을 얻었다. 직구 및 커브볼 투구시 구간별, 국면별 투구시간은 거의 비슷하게 나타냈으며, 직구의 총 소요시간은 1.78${\pm}$0.07초이며 커브 총 소요시간은 1.77${\pm}$0.11초로 나타났다. 직구 및 커브볼 투구시 Z(상 하)방향에 대한 신체 중심의 위치변화는 구간별, 국면별 거의 차이가 나지 않았다. 직구 및 커브볼 투구시 왼쪽 다리의 무릎높이는 각각 $125.38{\pm}11.85cm,\;124.95{\pm}11.63cm$로 큰 차이가 없었다. 신장대비율(%H)로는 직구, 커브 각각 68.42${\pm}$5.53(%H), 68.40${\pm}$5.45(%H)로 나타났다. 직구 및 커브볼 투구시 스트라이드 거리는 각각 140.35${\pm}$4.96cm, 144.83${\pm}$1.69cm로 커브 투구시 더 많은 스트라이드 거리를 보였다. 직구 및 커브볼 투구시 왼쪽 슬관절 ST 구간과 LKU 구간, HBP 구간에서는 별 차이가 없었지만 LFC, MCP, BRP구간에서는 직구보다 커브 투구시 슬관절 각도가 더 굴곡 된 것으로 나타났다. 직구 및 커브볼 투구시 오른팔 견관절 각도는 ST 구간과 LKU구간, HBP 구간에서는 별차이가 없었다. 직구 및 커브볼 투구시 오른팔 주관절 각도는 ST 구간과 LKU구간, HBP 구간에서는 별차이 가 없었다. LFC구간과 MCP구간에서는 직구보다 커브가 다소 많이 굴곡되었고, BRP구간에서 는 직구, 커브 모두 다 근소한 차로 신전 된 것으로 나타났다. 직구 및 커브볼 투구시 오른팔 수관절 각도는 LFC 구간과 MCP 구간에서는 커브가 직구보다 더 신전되었다. 그리고 BRP 구간은 직구가 커브보다 더 신전 된 것으로 나타났다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.291-294
• /
• 2003

Ball indentation tests have been used to estimate the mechanical properties of materials by some investigators. In this study, load-depth curves from ball indentation tests have been analysed using the geometric conditions of ball indentation. Series of numerical calculations and experimental results showed that those curves could be simplified by linear functions. After linearizing the indentation curves, the estimation process of the flow properties became straight forward and the scatter of results could be drastically reduced.

• 한국운동역학회지
• /
• 제22권3호
• /
• pp.269-276
• /
• 2012

The purpose of This study's aim is to examine the difference in the changes of body segment movement, variables for ball quality, and carry at golf driver swing according to the ball quality using comparative analysis. Regarding the impact variables according to the ball quality using the track man and carry, club speed was the fastest at draw shot, ball speed was the fastest at straight shot, and smash factor was the lowest at draw shot. About the vertical launch angle, the fade shot showed the highest launch angle while the max height of the ground and ball was the highest at fade shot. And carry was the longest at draw shot. For the flight time, it was the longest at draw shot. The landing angle was the largest at fade shot. About the club head position change and trajectory, at the overall event point, the fade shot drew a more outer trajectory at the point of the follow through(E6) than the straight or draw shot. Regarding the angular speed of shoulder rotation, at the overall event point, the fade shot showed the greatest angular speed change in the follow through(E6). Also, about the angular speed of pelvic rotation, at the overall event point, the draw shot showed the greatest angular speed change at the point of down swing(E4). Concerning the stance angle change, both straight and fade shots were open as the concept of open stance whereas the draw shot was close as that of close stance. Regarding the previous study, the most important factor of deciding Ball Quality is the club face angle's open and close state at Impact. In short, the Ball Quality and carry were decided by this factor.

• 소성∙가공
• /
• 제12권4호
• /
• pp.328-333
• /
• 2003

Ball indentation tests have been used to estimate the mechanical properties of materials by several investigators. In this study, load-depth curves from ball indentation tests were analyzed using the geometric conditions of the contact between ball and specimen. A series of numerical calculations and experimental results showed that the contact load-depth curves could be simplified by linear functions. Once we obtained the contact indentation depth from linearizing the experimental indentation curves, the estimation process of the flow properties became straight-forward and the scatter of results could be drastically reduced.

• 한국운동역학회지
• /
• 제27권4호
• /
• pp.269-278
• /
• 2017

Objective: The purpose of this study was to develop a goal setting method for increasing the probability of a holed in a side inclined putting stroke. Method: Three-dimensional video data was recorded at a frequency of 120 hz per second after synchronizing 19 infrared motion capture systems (Qualisys, Gothenburg, Sweden). Putting green used a polycarbonate plate ($1.2{\times}2.4{\times}0.01meter$) with coefficient of friction (${\mu}=0.062$) and a real curve of the actual hole. Results: The velocity ratio between the club and the ball was 1:1.6 under various ball speed conditions in this study. The overall position of the break is 1 m to 1.4 m from the point where the ball leaves. If there is a slope, the ball follows the target line by the straightening force, and when it reaches 1 m position, the straightening force decreases by 30~50% and reaches to the deviation (break) point which is severely influenced by the slope. From here, the ball is aimed in a direction other than the target, and the size is affected by the slope. Conclusion: If there is a side slope, the ball moves away from the straight line, and the larger the slope, the closer the break point is to the starting point of the ball. Therefore, it is necessary to calculate the degree of departure according to the slope carefully, and it is preferable that the slower the speed is, the more the influence of the slope becomes. It is preferable to use the center of the hole as a reference when calculating the departure.

• 대한기계학회논문집
• /
• 제9권4호
• /
• pp.440-451
• /
• 1985

본 논문에서는 곡면절삭력계의 해석을 통하여 절삭성과 내마멸성이 우수한 공 구기하형상과 곡면절삭과정에서 절삭조건에 따라 변화하는 가공정밀도 및 안정성을 규 명하고자 한다.