• Advances in biomechanics and applications
• /
• v.1 no.3
• /
• pp.187-210
• /
• 2014

With the goal of increasing the survivorship of the prosthesis and anticipating primary stability problems of new prosthetic implants, finite element evaluation of the micromotion, at an early stage of the development, is mandatory. This allows assessing and optimizing different designs without manufacturing prostheses. This study aimed at investigating, using finite element analysis (FEA), the difference in the prediction of the primary stability of cementless hip prostheses implanted into a $Sawbones^{(R)}$ 4th generation, using the manufacturer's mechanical properties and using mechanical properties close to that of human bone provided by the literature (39 papers). FEA was carried out on the composite $Sawbones^{(R)}$ implanted with a straight taper femoral stem subjected to a loading condition simulating normal walking. Our results show that micromotion increases with a reduction of the bone material properties and decreases with the augmentation of the bone material properties at the stem-bone interface. Indeed, a decrease of the cancellous Young modulus from 155MPa to 50MPa increased the average micromotion from $29{\mu}m$ up to $41{\mu}m$ (+42%), whereas an increase of the cancellous Young modulus from 155MPa to 1000MPa decreased the average micromotion from $29{\mu}m$ to $5{\mu}m$ (-83%). A decrease of cortical Young modulus from 16.7GPa to 9GPa increase the average global micromotion from $29{\mu}m$ to $35{\mu}m$ (+33%), whereas an increase of the cortical Young modulus from 16.7GPa to 21GPa decreased the average global micromotion from $29{\mu}m$ to $27{\mu}m$ (-7%). It can also be seen that the material properties of the cancellous structure had a greater influence on the micromotion than the material properties of the cortical structure. The present study shows that micromotion predicted at the stem-bone interface with material properties of the $Sawbones^{(R)}$ 4th generation is close to that predicted with mechanical properties of human femur.

• Korean Journal of Agricultural Science
• /
• v.27 no.1
• /
• pp.5-12
• /
• 2000

The main purpose of this study is to obtain spatial image information toward forest thinning process in Larix forest stands. Thirteen different alternatives were simulated to visualize on the basis of actual thinning work photos. The options were illustrated as photos produced by photoshop program. Each alternatives were evaluated by forest visitor group with total 244 respondents after reliability test. Spatial images of 13 thinning photos were measured by 12 semantic differential scale as broad -narrow, ordered-tangled, friendly-unfriendly, monotonous-divers, dry-refreshing, relieved -stifling, healthy-sickly, uniform-scattered, dead-alive, opened-closed, bent-straight, and beautiful-ugly. In comparison with thinning stands and natural stands, thinning works were visual improvement effects of spatial images. Seemingly, this trend is due to definite form beauty, straight and clear length form of coniferous forest, As can be expected, slash and downwood were negatively related to improvement effects of spatial images. The 60% ratio of stem/ tree height and 450-950 trees/ha was positive in attraction of spatial images. Results indicate how to conduct forest thinning system for spatial images on Larix forest stands.

• Korean Journal of Weed Science
• /
• v.17 no.3
• /
• pp.303-309
• /
• 1997

Variation of morphological and physiological traits of 50 Bidens tripartita accessions were studied and the accessions were grouped through cluster analysis based on four major characters; plant type, leaf partition, achene length, days to flowering. Bidens tripartite accessions have shown significant variations in plant type, stem length, days to flowering, leaf shape, leaf partition, chlorophyll content, leaf color, stem color, achene color, achene length and achene shape. Most of Bidens tripartite accessions appeared to have strong dormancy and also photodormancy with some exceptions. Plants could be classified into 5 types from straight(I) to triangle(V), and intermediate diamond type(III) was prevalent. The plant type score has negative correlation with the stem length. None, three, and five part leaved plants were observed and most of them were three or five parted. Leaf partition had negative correlation with achene length and chlorophyll content. Average days to flowering was 108 days in the range of 94~141 days. It had positive correlation with achene length and leaf shape and negative correlation with achene color. Average achene length was 10.0mm and it had positive correlation with achene shape, stem length, days to flowering and leaf shape. It also had negative correlation with leaf color, stem color, achene color, leaf partition. Bidens tripartite accessions could be divided into identifiable six groups from the cluster analysis at the distance 0.06 using Ward's minimum-variance method.

• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.215-220
• /
• 2017

This study was conducted to improve the insufficiency of fruit vegetable grafting system developed by National Institute of Agricultural Sciences, Rural Development Administration. When the rotary blade cut the stem of scions and rootstocks, the grafting failure at curved cutting surfaces happened. The cutting depth of a tomato seedling by a rotated cutter was calculated 0.11 mm even when the cutting arm length and the maximum stem diameter were 50 mm and 5 mm, respectively. Mathematical analysis and high-speed photography showed that there was no problem by cutting in straight the stem of scions and rootstocks. The compression test of seedling stems to design the optimal shape of gripper showed that stems were not completely restored when they were compressed above 0.8 mm and 0.6 mm in case of rootstocks and scion, respectively. This study found that the bending angle of stem of tomato seedlings at the grafting period was 10 degree on average. The optimal gripper finger was the edge finger type which could be precisely set center point by adjusting the distance between fingers. In addition, it was found that most of seedling could be grasped without damage when the finger-to-finger distances is set to 2.5 mm for scion and 3.0 mm for rootstocks and finger are coated by 1 mm-thick flexible material.

• Animal Systematics, Evolution and Diversity
• /
• v.30 no.2
• /
• pp.95-102
• /
• 2014

The four species of the suborder Holaxonia, Anthogorgia japonica Studer, 1889 of family Acanthogorgiidae, Astrogorgia rubra (Thomson & Henderson, 1906), Euplexaura attenuata (Nutting, 1910), and E. erecta (Kukenthal, 1908) of family Plexauridae have been newly recorded in Korea. They were collected from intertidal and sublittoral zones in the western and southern coasts and Jeju-do Island of Korea by SCUBA diving and fishing nets from 1969 to 2010. This study approaches holaxonians by focusing on external and internal morphologies including size, form, and color of colonies, branches, polyps, coenenchyme, axis, and spicules. Anthogorgia japonica is characterized by its planar growth form, dichotomously branched form, non-retractile polyps, and Astrogorgia rubra by arrangement of calyxes being situated in lateral side at stems and alternately in all sides at branches. Euplexaura attenuata is sparsely and laterally branched colony, and has straight wand-like stems. Euplexaura erecta has branches which run parallel to the main stem.

• Journal of Plant Biology
• /
• v.22 no.3
• /
• pp.59-62
• /
• 1979

Distribution and standing crops of seedling and sapling as undergrowing tree were investigated in a Pinus rigida forest. The relative light intensity(RLI) on the ground level was 3.9∼59.3% which indicates a wide range. Under this range of RLI seedlings and saplings distribute well in the stand. Eight trees were selected from the stand, then measured dry weight of stem, branches and leaves using thestratified clip technique. A possible relationship between the diameter at the bottom of the tree (Do) and standing crops was investigated. As Do increased from 0.8cm (T1) to 7.2cm (T8), the standing crops also increased from 42.6g to 7,410.4g. Since semi-log values between Do and standing crops clearly indicates a straight line, there is close relationship between these two factors. Therefore it is possible to estimate the standing crops of seedling and sapling by measuring Do. Productive structure shows that phytosynthetic layer is located above the 1/2 height of the tree and maximum photosynthetic layer apperars on 2/3 level in height.

• Mycobiology
• /
• v.43 no.3
• /
• pp.366-370
• /
• 2015

Acanthopanax divaricatus, a member of the Araliaceae family, has been used as an invigorant in traditional Korean medicine. During disease monitoring, a stem with small, irregular, brown lesions was sampled at a farm in Cheonan in 2011. The symptoms seen were sunken cankers and reddish-brown needles on the infected twig. The isolated fungal colonies were whitish, having crenated edges and aerial mycelium on the surface, and with black gregarious fruiting bodies. The reverse plate was creamy white. Conidia were $17{\sim}22{\times}3.5{\sim}4.2{\mu}m$, fusiform, 4-septate, and straight to slightly curved. The nucleotide sequence of the partial translation elongation factor 1 alpha gene of the fungal isolate, shares 99% sequence identity with that of known Pestalotiopsis ellipsospora. Based on the results of the morphological and molecular analyses, the fungal isolate was identified as P. ellipsospora. In Korea, this is the first report of canker on A. divaricatus.

• Journal of Korean Society of Forest Science
• /
• v.94 no.6
• /
• pp.441-445
• /
• 2005

Researches on estimating national-scaled forest biomass are being carried out to quantify the carbon stock of forests with the Kyoto Protocol. In general, estimates of national-scaled forest biomass are based on forest inventory data which provides estimates of forest area, stem volume, and growth of stem by age classes. Estimates of forest biomass are, however, obtained by converting stem volumes to dry weight with stem density and thereafter to whole tree biomass with biomass expansion factors (ratios of whole tree dry weight to stem dry weight). Pinus densiflora is widely distributed and one of the most economically important timber species in Korea. The species are largely grouped into two ecotypes of Geumgang and Jungbu. Stems of Geumgang type trees are straight and high compared to those of Jungbu type trees. The objective of this study was to determine and compare stem density and biomass expansion factors fore two ecotypes of Pinus densiflora according to stand age. Stem density of both ecotypes of Pinus densora increased and biomass expansion factors of them decreased with increasing tree age. In he same age class, stem density and biomass expansion factor of Geungang type Pinus densiflora were lower than those of Jungbu type Pinus densiflora. There were statistically significant differences in stem density and biomass expansion factors between Geumgang type and Jungbu type Pinus densiflora in 0-20-year-old stands and 40-60-year-old stands. Our results suggested that the reliability of the national forest biomass inventory could be improved by applying the ecotype- and age-dependent stem density and biomass expansion factors.

• Journal of Mushroom
• /
• v.22 no.3
• /
• pp.117-121
• /
• 2024

The oyster mushrooms have known to be a major product in Gyeonggi-do, with production accounting for 69% of the entire country. The 'Daeseon' cultivar, which has white and straight stem, was developed. This cultivar was developed by mating monokaryons isolated from the 'Heuktari' and 'Hwaseong-2ho' varieties. The optimum temperature for the mycelial growth was 26~32℃ on PDA medium and that for the primordia formation and the growth of fruit body of 'Daeseon' was 16~20℃ on sawdust media. It took 35 days to complete spawn running, 3 days for finish primordia formation, and 4 days for finish fruit body growth in the bottle culture. It has shallow funnel-shaped pileus and a white straight stipe. The yield per bottle was 201 g/1,100 ml and was 16% higher than that of control cultivar 'Suhan-1ho'. Based on above results, we expect this cultivar to be suitable for small packaging.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.318-318
• /
• 2022

Basil(Ocimum basilicum L.) is an annual herb that grows wild in hot and humid regions such as tropical Asia and Africa. This study was carried out for resource discovery, propagation, and DB construction of aromatic plants. In order to evaluate the genetic characteristics, 28 kinds of basil seeds were supplied from the Center for Genetic Resources. For basil characteristics, planting date, plant height, growth shape, leaf length, leaf shape, petiole color, petiole, stem color, flower color, after harvest, Ml length including roots, flower length, stem thickness and biological weight were measured. For anthocyanin analysis, only basil with purple color was selected, anthocyanins were extracted with 60% ethanol containing 1% citric acid, a standard quantitative curve was prepared with cyanidin-3-glucoside, and absorbance was measured at 525 nm. Basil planting started around June 16, and the flowering period lasted for a total of 18 days from July 19 to August 5. On August 6, when flowering was completed, morphological characteristics including flower color were measured at the site by an object. The measured basil plant length was 26.6-59.6 cm, leaf length 2.0-7.9 cm, leaf width 0.7-5.2 cm, and petiole 1.3-3.9 cm. The growth pattern of basil was generally straight, medium in shape. The color of the leaves was observed evenly by mixed green, purple, purple and green, and the recesses in the shape of the leaf were also conspicuously observed. A total of three basil flower colors were observed: white, light pink(149P 10P/84), and purple(37V 2.5RP 4/12). During the second growth survey after harvest, the total length including the basil roots is 26.7-52.0 cm, the flower length is 8.2-29.3cm, the stem thickness is 7.1-15.9mm, the number of stem nodes is 3-12 nodes, and the total weight of the basil was measured to be about 218-1540 g. There are a total of 16 types of basil expressed in purple, and the anthocyanin content was measured to be 73.74 ~ 380.72 mg/100g.