• Journal of Ginseng Research
• /
• 제18권2호
• /
• pp.128-133
• /
• 1994

Color characteristics were investigated for white ginseng powder immediately and during storage following treatments of gamma ray or ethylene oxide (EO) for microbial decontamination. The variation in fatand water-soluble pigments of the sample was negligible immediately after both treatments, however an apparent increase was observed in the samples stored for four months at $25^{\circ}C$ and RH 90%, in the order of nontreated control, EO-fumigated, and 5 key-irradiated samples. Hunter's color a and b values of white ginseng powder increased slightly in proportion to irradiation doses, whereas EO fumigation caused a decrease in L value and an increase in a and b values of the sample, showing overall color difference (${\delta}^E$) of 1.8. Considering the higher ${\delta}^E$ in the higher RH conditions, airtight packaging and sterilization using like gamma ray were considered an effective means for maintaining high quality of color characteristics in stored white ginseng powder.

• Nuclear Engineering and Technology
• /
• 제43권5호
• /
• pp.405-412
• /
• 2011

Used nuclear fuel will likely be stored dry for extended periods of time in the USA. Until a final disposition pathway is chosen, the storage periods will almost definitely be longer than were originally intended. The ability of the important-tosafety structures, systems, and components (SSCs) to continue to meet storage and transport safety functions over extended times must be determined. It must be assured that there is no significant degradation of the fuel or dry cask storage systems. Also, it is projected that the maximum discharge burnups of the used nuclear fuel will increase. Thus, it is necessary to obtain data on high burnup fuel to demonstrate that the used nuclear fuel remains intact after extended storage. An evaluation was performed to determine the conditions that may lead to failure of dry storage SSCs. This paper documents the initial technical gap analysis performed to identify data and modeling needs to develop the desired technical bases to ensure the safety functions of dry stored fuel.

• 전력전자학회논문지
• /
• 제6권1호
• /
• pp.43-48
• /
• 2001

기존의 풍력발전시스템은 풍속이 감소되면 블레이드가 저속으로 회전하기 때문에 보조발전의 도움이 없이는 자가 발전이 어려워서 한정된 풍속 조건에서만 작동이 가능하며, 풍속의 특성 때문에 풍력에너지의 이용효율이 대부 분 매우 낮다는 문제점이 있다 이와 같은 종래의 문제점을 해결하고 지역이나 지형에 크게 구애됨이 없이 풍속에 의해 발전이 이루어지다가 풍속의 저하로 출력된 전력이 적어지면 태엽에 저장된 회전에너지로 소형발전기를 운전 하여 축전지에 전력을 저장하여 부하에 전력을 연속적으로 공급하게 한다. 본 논문에서는 동력저장장치와 풍력발전기로 구성된 시스템을 설계 제작하여 풍력발전의 보상을 위한 동력저장 장치 시스템의 동작 특성을 분석하였다.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.68-73
• /
• 2019

벅 컨버터는 전압 직류 계통(LVDC), 가전 분야 및 전기차 충방전 분야에서 다양하게 적용되고 있는 전력변환장치이며, 일반적으로 벅 컨버터는 부하측에 단락 등 고장 발생시 반도체 스위칭 소자를 개방시켜 벅 컨버터의 운전을 중지시킨다. 그러나 벅 컨버터의 출력단에 인덕터와 캐패시터에 저장된 에너지로 인해 고장 전류가 지속적으로 부하로 전달되는 문제점을 가지고 있다. 본 논문에서는 벅 컨버터의 출력측 저역통과 필터에 일반적인 인덕터 대신 커플드 인덕터(Coupled-inductor)를 사용하여 인덕터에 저장된 전기에너지를 부하단에 공급되지 않도록 소모시키는 구성을 포함하는 벅 컨버터의 새로운 고장전류 고속차단 방식을 제안하며, 제안된 방식은 시뮬레이션을 통해 성능을 검증하였다.

• 한국식품조리과학회지
• /
• 제19권6호
• /
• pp.758-764
• /
• 2003

This study was performed to determine the quality characteristics of mixed polysaccharide gels made from kcarrageenan and locust bean gum with various kiwifruit content after freeze-thawing. The syneresis, rupture properties, TPA properties and sensory properties of the mixed polysaccharide gels with various kiwifruit contents after freeze-thawing were measured. The syneresis of the gel with various kiwifruit contents by freeze-thawing was not significantly different, whereas repeating freeze-thawing resulted in remarkable increase in the syneresis of the mixed polysaccharide gels with 5％, 20％ and 40％ kiwifruit. In terms of the rupture properties, the rupture stress, rupture energy and rupture strain decreased with increasing kiwifruit content after freeze-thawing. In terms of the TPA properties, the adhesiveness, hardness and chewiness increased and the cohesiveness decreased with increasing kiwifruit content after freeze-thawing. The rupture properties, springiness and cohesiveness of the gel by freeze-thawing were lower than those of the gel stored in the refrigerator. In contrast, the gumminess, hardness and chewiness of the gel after freeze-thawing were higher than those of the gel stored in the refrigerator. The results showed that the gel became crumbly and tough as a result of freeze-thawing. In the sensory evaluation, He overall acceptability of the gel after freeze-thawing was highest at the 30％ kiwifruit content, and differences in the sensory properties between the gel after freeze-thawing and that stored in the refrigerator were small. Therefore, mixed polysaccharide gels with kiwifruit after freeze-thawing could be useful despite the small decrease in quality.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.66-67
• /
• 2019

Insulated buildings are exposed to the external environment due to aging and construction problems, resulting in a decrease in building energy efficiency. Therefore, the purpose of this paper is to provide a material for the change in thermal conductivity of the insulation when it is exposed to various external environments. In the experiment, five types of heat insulating materials were selected, stored under different environmental conditions, and the thermal conductivity was measured periodically to confirm the change in thermal conductivity. As a result, the thermal conductivity of all the insulating materials except the PF board increased with the passage of time. This is because thermal insulation absorbs atmospheric moisture under all environmental conditions and the thermal conductivity increases, and in the case of thermal insulation stored indoors in environmental conditions, the temperature differs from the thermal insulation stored outside. It is considered that there is little evaporation of moisture absorbed constantly, and the change in thermal conductivity is large.

• Coupled systems mechanics
• /
• 제3권4호
• /
• pp.329-344
• /
• 2014

In this work, quantum molecular dynamics simulations (QMD) are preformed to study the hydrogen molecules in three types of carbon nanostructures, $C_{60}$ fullerene, (5,5) and (9,0) carbon nanotubes and graphene layers. Interactions between hydrogen and the nanostructures is of importance to understand hydrogen storage for the development of hydrogen economy. The QMD method overcomes the difficulties with empirical interatomic potentials to model the interaction among hydrogen and carbon atoms in the confined geometry. In QMD, the interatomic forces are calculated by solving the Schrodinger's equation with the density functional theory (DFT) formulation, and the positions of the atomic nucleus are calculated with the Newton's second law in accordance with the Born-Oppenheimer approximation. It is found that the number of hydrogen atoms that is less than 58 can be stored in the $C_{60}$ fullerene. With larger carbon fullerenes, more hydrogen may be stored. For hydrogen molecules passing though the fullerene, a particular orientation is required to obtain least energy barrier. For carbon nanotubes and graphene, adsorption may adhere hydrogen atoms to carbon atoms. In addition, hydrogen molecules can also be stored inside the nanotubes or between the adjacent layers in graphite, multi-layer graphene.

• Current Photovoltaic Research
• /
• 제4권3호
• /
• pp.93-97
• /
• 2016

Light-emitting chromophores have been separated from silica spheres modified the surface with 3-(trimethoxysilyl)propylmethacrylate (TMSPM). The photoluminescence characteristics of the chromophores were investigated with various excitation wavelengths. The TMSPM was attached to the surface of silica spheres at $75^{\circ}C$. Large number of round shaped particles of the TMSPM was on the surface of silica spheres after 3 h reaction. The TMPSM was completely covered on the surface of the spheres after 6 h reaction. The surface modified silica spheres were soaked into acetone and stored for 20 days at ambient condition. The solution color slowly changed from light yellow to deep yellow with the increase of the storing time. The FTIR absorption peaks at 3348, 2869, 2927, 1715, 1453/1377, 1296, and $1120cm^{-1}$ represent C-OH, $R-CH_3$, $R_2-CH_2$, -C=O, C-H, C=C-H, and Si-O-Si absorption, respectively. The FTIR absorption peak at $1715cm^{-1}$ representing the ester -C=O stretching vibration for silica spheres stored for 20 days was increased compared with the spheres without aging. The UV-visible absorption peaks were at 4.51 eV (275 nm) and 3.91 eV (317 nm). There were two luminescence peaks at 2.51 eV (495 nm) and 2.25 eV (550 nm). The emission at 2.51 eV was dominant peak when the excitation energy was higher than 2.58 eV, and emission at 2.25 eV became dominant peak when the excitation energy was lower than 2.58 eV.

• 한국정보과학회논문지:시스템및이론
• /
• 제37권1호
• /
• pp.55-59
• /
• 2010

대부분의 태양 에너지 기반 센서 네트워크 응용에서 센서 노드들은 외부 네트워크와의 지속적인 연결이나 관리자에 의한 유지 보수가 불가능한 장소에 배치된다. 따라서 최대한 많은 양의 센싱 데이터들이 관리자에 의해 업로드 될 때까지 네트워크 내에 저장되어 있어야 한다. 이를 위하여 네트워크의 관점에서는 각 노드들 사이의 균형적인 데이터 분배가 이루어져야 하는데, 이를 효과적으로 수행하려면 각 노드의 사용가능한 에너지와 저장 공간에 대한 정보를 최대한 활용하여야 한다. 본 논문에서는 태양 에너지 기반의 노드들로 구성된 센서 네트워크에서 각 노드가 수집하는 태양 에너지를 효율적으로 이용함과 동시에 각 노드들의 저장 공간을 최대로 활용할 수 있는 간단하지만 매우 효과적인 데이터 분배 알고리즘을 소개한다. 본 알고리즘은 각 노드의 수집 에너지 중에서 데이터 분배에 사용될 수 있는 에너지의 양을 결정하고, 자신과 이웃 노드의 저장 공간 정보에 따라 각 이웃 노드들로 보낼 최적의 데이터 전송 양을 결정한다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권2호
• /
• pp.45-49
• /
• 2015

It has been well known that a toroid is the inevitable shape for a high temperature superconducting (HTS) coil as a component of a large scale superconducting magnetic energy storage system (SMES) because it is the best option to minimize a magnetic field intensity applied perpendicularly to the HTS wires. Even though a perfect toroid coil does not have a perpendicular magnetic field, for a practical toroid coil composed of many HTS pancake coils, some type of perpendicular magnetic field cannot be avoided, which is a major cause of degradation of the HTS wires. In order to suggest an optimum design solution for an HTS SMES system, we need an accurate, fast, and effective calculation for the magnetic field, mechanical stresses, and stored energy. As a calculation method for these criteria, a numerical calculation such as an finite element method (FEM) has usually been adopted. However, a 3-dimensional FEM can involve complicated calculation and can be relatively time consuming, which leads to very inefficient iterations for an optimal design process. In this paper, we suggested an intuitive and effective way to determine the maximum magnetic field intensity in the HTS coil by using an analytic and statistical calculation method. We were able to achieve a remarkable reduction of the calculation time by using this method. The calculation results using this method for sample model coils were compared with those obtained by conventional numerical method to verify the accuracy and availability of this proposed method. After the successful substitution of this calculation method for the proposed design program, a similar method of determining the maximum mechanical stress in the HTS coil will also be studied as a future work.