• Journal of KIISE
• /
• v.42 no.1
• /
• pp.54-67
• /
• 2015

Nowadays, studies on the fusion of Semantic Web technologies are being carried out to promote the interoperability and value of sensor data in an IoT environment. To accomplish this, the semantic translation of sensor data is essential for convergence with service domain knowledge. The existing semantic translation technique, however, involves translating from static metadata into semantic data(RDF), and cannot properly process real-time and large-scale features in an IoT environment. Therefore, in this paper, we propose a technique for translating large-scale streaming sensor data generated in an IoT environment into semantic data, using real-time and parallel processing. In this technique, we define rules for semantic translation and store them in the semantic repository. The sensor data is translated in real-time with parallel processing using these pre-defined rules and an ontology-based semantic model. To improve the performance, we use the Apache Storm, a real-time big data analysis framework for parallel processing. The proposed technique was subjected to performance testing with the AWS observation data of the Meteorological Administration, which are large-scale streaming sensor data for demonstration purposes.

• The KIPS Transactions:PartC
• /
• v.8C no.6
• /
• pp.775-782
• /
• 2001

Recently the use of Linux OS is increasing to tremendous figures. But due to the fact that Linux is distributed on an open-source policy, the need of security is an upcoming question which leads to widespread development of security on a Linux based environment. Cryptography, however, can cause various problems because of difficulty of key management. A lot of researchers have been concentrating on the key recovery technique to eliminate the reverse effect of using these kinds of security and to promote positive aspects of using it. In this thesis I am suggesting an mechanism based on the key recovery technique, as a method to save time in recovery and resetting a disconnection between two end-users through IPSec (IP Security) protocols in a VPN (Virtual Private Network) environment. The main idea of the newly suggested mechanism, KRFSH (Key Recovery Field Storage Header), is to store the information of the session in advance for the case of losing the session information essential to establish a tunnel connection between a SG and a host in the VPN environment, and so if necessary to use the pre-stored information for recovery. This mechanism is loaded on the IPSec based FreeS/WAN program (Linux environment), and so the VPN problem mentioned above is resolved.

• Journal of Multimedia Information System
• /
• v.5 no.4
• /
• pp.235-244
• /
• 2018

Potential maximum soil moisture retention (S) is a dominant parameter in the Soil Conservation Service (SCS; now called the USDA Natural Resources Conservation Service (NRCS)) runoff Curve Number (CN) method commonly used in hydrologic modeling for event-based flood forecasting (SCS, 1985). Physically, S represents the depth [L] soil could store water through infiltration. The depth of soil moisture retention will vary depending on infiltration from previous rainfall events; an adjustment is usually made using a factor for Antecedent Moisture Conditions (AMCs). Application of the method for continuous simulation of multiple storms has typically involved updating the AMC and S. However, these studies have focused on a time step where S is allowed to vary at daily or longer time scales. While useful for hydrologic events that span multiple days, this temporal resolution is too coarse for short-term applications such as flash flood events. In this study, an approach for deriving a time-variable potential maximum soil moisture retention curve (S-curve) at hourly time-scales is presented. The methodology is applied to the Napa River basin, California. Rainfall events from 2011 to 2012 are used for estimating the event-based S. As a result, we derive an S-curve which is classified into three sections depending on the recovery rate of S for soil moisture conditions ranging from 1) dry, 2) transitional from dry to wet, and 3) wet. The first section is described as gradually increasing recovering S (0.97 mm/hr or 23.28 mm/day), the second section is described as steeply recovering S (2.11 mm/hr or 50.64 mm/day) and the third section is described as gradually decreasing recovery (0.34 mm/hr or 8.16 mm/day). Using the S-curve, we can estimate the hourly change of soil moisture content according to the time duration after rainfall cessation, which is then used to estimate direct runoff for a continuous simulation for flood forecasting.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.12
• /
• pp.295-300
• /
• 2018

The rapid development of IT, many conventional passive jobs have been automated. This automation increases the leisure time of many people and various services are being developed for them. In addition, with the advent of smart devices that are compact and portable, it is possible to use various internet services without any time and place discretion. Various studies based on virtualization are under way to efficiently store and process large data generated by many devices and services. Desktop Storage Virtualization (DSV), which integrates and provides users with on-premise-based distributed desktop resources during these studies, uses virtualization to consolidate unused resources within distributed, legacy desktops. This DSV is very important for providing high reliability to users. In addition, research on hierarchical structure and resource integration for efficient data distribution storage processing in a distributed desktop-based resource integration environment is underway. However, there is a lack of research on efficient operation in case of server failure in on-premise resource integration environment. In this paper, we propose Non-disruptive Server Management (NSM) which can actively cope with the failure of desktop server in distributed desktop storage environment based on on-premise. NSM is easy to add and remove desktops in a desktop-based integrated environment. In addition, an alternative server is actively performed in response to a failure occurrence.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.19
• /
• pp.191-223
• /
• 2003

Electronic commerce and the Internet offer unprecedented opportunities. The explosive expansion of the use of the Internet makes it possible for businesses to expand their markets and render services. Global transaction costs are easy to cut off using Internet and transaction speed is faster than before. Where cyberspace is not free from claims, Offline transaction can lead to problems and disputes the same is for cyberspace transactions. However ADR is not meet for the online transaction for speed, cost and open network system, ODR methods to resolve electronic commerce conflicts is crucial for building confidence and permitting access to justice in an online business environment. The use of the Internet and the network in dispute resolution has an impact on the types of communication implied in the relevant processes such as automated negotiation, online mediation and online arbitration and involves new technological issues such as the integrity and confidentiality of data and communication used to transmit and store data. Among the ODR systems Online Arbitration is currently binding both parties disputed and can achieve the aim of dispute award the same as the traditional arbitration. Arbitration is based on the New York Convention 1958, Arbitration Model law 1985 and national Arbitration Act that are founded on territorial area and rested on arbitration agreement, constitution of the arbitral tribunal, due process, final and binding award and enforcement of the arbitration award. To compare with this issues Online arbitration has unnecessarily legal unstability and risk. ODR is the burgeoning field and has created a new issues. All such issues which have been debated in the ADR are composed with ODR. But these are not limited Some of issues are further complicated by the nature of the online environment such as confidentiality and principle of parties. It is true that online arbitration should comply with legal provisions, but which is impossible to adhere of the law. Flexible translation and functional equivalence of legal provisions are needed for acceptance of electronic commerce disputes. Finally electronic commerce now takes place on the Internet, it is inevitable that the commercial world wants access to dispute resolution process that best suits the new commercial environment. ODR methods are processing for development and legal issues are considered by both national and international authorities. Introduction of new Conventions or amend Convention and Model law of ODR comes near.

• Clean Technology
• /
• v.26 no.1
• /
• pp.55-64
• /
• 2020

According to the Korean Renewable Energy 3020 Implementation Plan, the installation capacity of renewable energy is expected to increase whereas technology for storing excess electricity and stabilizing the power supply of renewable energy sources is extremely required. Power-to-Gas is one of energy storage technologies where electricity is converted into gas fuel such as hydrogen and methane. Basically, Power-to-Gas system could be effectively utilized to store excess electricity generated by an imbalance between supply and demand. In this study, the economic feasibility analysis of Power-to-Gas reflecting the domestic situation was carried out. Total revenue requirement method was utilized to estimate the levelized cost of hydrogen. Validation on the economic analysis method in this study was conducted by comparison of the result, which is published by the International Energy Agency. The levelized cost of hydrogen of a 100-MW Power-to-Gas system reflecting the current economic status in Korea is 8,344 won kg^-1. The sensitivity analysis was carried out, applying the main analysis economic factors such as electricity cost, electrolyser cost, and operating year. Based on the sensitivity analysis, the conditions for economic feasibility were suggested by comparing the cost of producing hydrogen using renewable energy with the cost of producing natural gas reformed hydrogen with carbon capture and storage.

• Journal of Radiation Protection and Research
• /
• v.21 no.4
• /
• pp.313-327
• /
• 1996

As an at-reactor(AR) storage method o( spent fuel, there are horizontal concrete module type, metal storage cask type, concrete storage cask type, dual purpose (transportation and storage) cask type and multi-purpose (transportation, storage and disposal) cask type. All other types except multi-purpose one have been already used for AR dry storage of spent fuels after obtaining operation license in various foreign countries. Also the development of multi-purpose type has been continued for operation license. In America, Japan, Germany, Canada, Spain, Switzerland, and Czech Republic, etc., AR dry storage facilities are under operation or on propulsion, and spent fuels are transported to interim storage facility or reprocessing plant after dry storage at reactor temporarily. At Wolsung site, in case of Korea, concrete silo type has already been introduced, and it is believed to be inevitable to store spent fuels at reactor temporarily, considering the reality that storage capacity of spent fuel is approaching to the limit in some nuclear power plants. In this report, the system characteristics, design requirements, technical standards and status of AR storage system, which is suitable for domestic site such as Kori, have been studied. In most cases, the licensed period of storage cask is limited up to 20 years and the integrity of material and maintenance of leaktightness are required during the whole service life.

• Journal of Environmental Health Sciences
• /
• v.39 no.2
• /
• pp.144-150
• /
• 2013

Objectives: Cooking activity in indoor environments can generate particulate matter. The objective of this study was to determine the concentrations of ultrafine particles (UFP), $PM_{2.5}$, and $PM_{10}$ in cooking and non-cooking areas of major department stores in Seoul. Methods: Eighteen department stores in Seoul, Korea were measured for concentrations of particulate matter. Using real-time monitors, concentrations of UFP, $PM_{2.5}$ and $PM_{10}$ were simultaneously measured in cooking and non-cooking areas on the floor with a food court and a non-cooking floor. Results: The concentrations of UFP, $PM_{2.5}$ and $PM_{10}$ were significantly higher in cooking areas than in noncooking areas and non-cooking floors (p<0.05). UFP and $PM_{2.5}$ were significantly correlated in cooking areas and non-cooking areas but not in non-cooking floors. $PM_{2.5}$ were consisted of approximately 81% in $PM_{10}$ and highly correlated with $PM_{10}$ in all places. Conclusion: A higher correlation between UFP and $PM_{2.5}$ was shown on cooking floor than on non-cooking floor in department stores. High levels of fine particles were caused by cooking activities at food courts. The further management of PM is needed to improve the indoor PM levels at food courts in department stores.

• Journal of the Korea Computer Graphics Society
• /
• v.18 no.2
• /
• pp.1-8
• /
• 2012

High dynamic range (HDR) images represent a far wider numerical range of exposures than common digital images. Thus it can accurately store intensity levels of light found in the specific scenes generated by light sources in the real world. Although a kind of professional HDR cameras which support fast accurate capturing has been developed, high costs prevent from employing those in general working environments. The common method to produce a HDR image with lower cost is to take a set of photos of the target scene with a range of exposures by general purpose cameras, and then to transform them into a HDR image by commercial softwares. However, the method needs complicate and accurate camera calibration processes. Furthermore, creating HDR environment maps which are used to produce high quality imaging contents includes delicate time-consuming manual processes. In this paper, we present an automatic HDR panorama environment map generating system which was constructed to make the complicated jobs of taking pictures easier. And we show that our system can be effectively applicable to photo-realistic compositing tasks which combine 3D graphic models with a 2D background scene using image-based lighting techniques.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.24-31
• /
• 2020

Centralized systems in computing environments have various problems, such as privacy infringement due to hacking, and the possibility of privacy violations in case of system failure. Blockchain, one of the core technologies for the next generation of converged information, is expected to be an alternative to the existing centralized system, which has had various problems. This paper proposes a blockchain-based user authentication system that can identify users using EID in an online environment. Existing identification (ID)/password (PW) authentication methods require users to store personal information in multiple sites, and receive and use their respective IDs. However, the proposed system can be used without users signing up at various sites after the issuing of an EID. The proposed system issues an EID with a minimum of information, such as an e-mail address and a telephone number. By comparing the stability and efficiency of a centralized system, the proposed integrated authentication system proved to be excellent. In order to compare stability against existing systems, we chose attack methods and encroachments on the computing environment. To verify efficiency, the total throughput between the user's app, the issuance and certification-authority's servers, and the service provider's servers was compared and analyzed based on processing time per transaction.