• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.187-198
• /
• 1996

In this study, the performance of an automobile heat storage system using PCM is numerically simulated. For the analysis of system performance. The phase-change of the PCM and the transient forced convective heat transfer for the HTF are considered simultaneously as a conjugate problem. The phase-change behavior is effectively analyzed using a concept of thermal resistance. From the correlations of phase change rate and heat transfer due to the variations of flow rate of HTF around PCM, the automobile heat storage system performance is predicted. The present results amy be used as the fundamental information for the design of automobile heat storage system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.39
• /
• pp.19-26
• /
• 1996

A solution procedure to minimize the number of storage carousels has been developed under the carousel throughput rate and total storage capacity requirements. The number of carousels can be reduced by increasing the throughput rate of carousels which depends upon the size of carousels, the storage item allocation to carousels, and the item position assignments in each carousel. Since the problem is very complicated and hard to solve optimally, the following solution procedure to solve the problem hierarchically is proposed: With a given number of carousels, the storage items are allocated to carousels so that the slowest average transaction time among carousels may be minimized, and then the position of each item is assigned in the allocated carousel so that the throughput of the carousel can be maximized.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.10
• /
• pp.16-20
• /
• 2015

We propose three multi-level modulation codes of the code rate 1/2 for holographic data storage considered as a promising candidate for next generation storage systems. Since a pixel with multi-levels can represent more than 1 bit, it is possible to increase the storage capacity and have many codewords. Thus, we can choose a code that the minimum distance is as far as possible. When we compare the codes with the code rate 1/2, the performance of the code with small number of levels is better than that of large number of levels.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3704-3710
• /
• 2021

The characteristics of the external radiation on the surface of the casks for spent nuclear fuel (SNF) storage by dry method are investigated for the case when the spatial distribution of SNF in the basket changes due to the destruction of the fuel rod claddings. The surface areas are determined, where the changes in fluxes of neutrons, produced by ²⁴⁴Cm actinide, and γ-quanta, produced by long-lived isotopes, are maximum in the result of the decrease in the height of the SNF area. Concrete (VSC-24) and metal (SC-21) casks are considered as examples. The procedure of periodic measurement of the dose rate of neutrons or γ-quanta at the specified points of the cask surface is proposed for identifying the fuel rod cladding destruction. Under normal operation, the decrease in the dose rate produced by neutrons as the function of SNF storage duration is determined by the half-life of ²⁴⁴Cm, and for γ-quanta - by the half-lives of long-lived SNF isotopes. Consequently, a stepwise change in the dose rate of neutrons or γ-quanta, detected by the measurements, as compared to the previous one, would indicate the destruction of the fuel rod claddings.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.24 no.1
• /
• pp.29-35
• /
• 2022

This study was conducted to investigate the seed storage method and seed germination characteristics of Synurus deltoides (Ait.) Nakai, a kind of wild vegetables. Several parameters affecting seed germination, such as germination temperature, chilling duration, imbibition duration, and storage method were evaluated. The seed germination of Synurus deltoides showed the highest germination rate (GR), promptness index (PI), germination performance index (GPI), mean daily germination (MDG) at 25℃. This implies that the optimum germination temperature was 25℃. And also, Seeds stored at -4℃, after 150 days showed relatively high germination rate about 98%. Therefore, The optimum germination temperature of Synurus deltoides was 25℃ and to increase the germination rate over 98% of Synurus deltoides, cold-wet storage 20 days treatments at 4℃ were effective in the improvement of seed germination.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.2
• /
• pp.211-215
• /
• 1997

Experiments were performed to find out the proper conditions of diluents for the short-tenn storage of sperm of black seabream, Acanthopagrus schlegeli. For milt collection, brood stock was reared in a recirculating seawater system. The following results indicated that short-term storage methods with fresh condition could tie employed in black seabream sperm. When the black seabream's serum was used as a diluent for the fresh storage, sperm activity index (SAI), fertilization rate and survival rate derived the best result in $7\~10\;days$ of storage. pH 7 and 8 showed the highest SAI in the same storage condition. In order to keep high SAI and survival rate of the sperm, addition of 800 ppm neomycine into the diluent revealed the best storage results.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.2
• /
• pp.233-238
• /
• 2008

Recently, rainwater harvesting facilities have increasingly constructed mainly in elementary schools and government buildings. Nevertheless, few methods are available for efficient planning and design of rainwater harvesting facilities by considering the weather conditions and purpose of rainwater management in each site, which may lead to a construction of uneconomic facilities. The current method estimates the size of rainwater storage tank by multiplying the size of building or plottage with a certain ratio and has many limitations. In this study, we first developed a method for planning and design of rainwater storage facilities using $Rainstock^{TM}$ model, which is based on mass balance, and economic analysis. Then, the model was applied for the design of a rainwater harvesting facility in a building with the catchment area of $1,000m^2$. The model calculation indicated that the economic feasibility of rainwater harvesting depends on not only the size of storage tank but also the water usage rate. When the water usage rate is $1m^3/day$, the rainwater harvesting facility is not cost-effective regardless of the size of the storage tank. With increasing the water usage rate, the economical efficiency of the facility was improved for a specific size of the storage tank. Based on the model calculation, the optimum tank sizes for $5m^3/day$ and $10m^3/day$ of water usage rates were $24m^3$ and $57m^3$, respectively. It is expected that the model is useful for optimization of rainwater storage facilities in planning and designing steps.

• Korean Journal of Plant Resources
• /
• v.29 no.6
• /
• pp.670-678
• /
• 2016

We compared the germination rate of dehisced ginseng (Panax ginseng) seeds that were dried under two different conditions, slowly at $15^{\circ}C$ [relative humidity (RH) 10-12%] and rapidly under a laminar airflow cabinet at $25^{\circ}C$ (RH 22-25%). The measurements showed that drying rate and seed moisture content (SMC) play important roles in storage ability and vigor. The seeds that were dried rapidly at $25^{\circ}C$ showed high GR compared with the seeds that were dried at $15^{\circ}C$ after 6 and 12 months of storage at $-80^{\circ}C$ irrespective of MC. Seeds dried slowly at $15^{\circ}C$ with MC higher than 7.0% showed high GR maintenance after storage at $-18^{\circ}C$ and at $4^{\circ}C$ in comparison with rapidly dried seeds. However, the GR of the slowly desiccated seeds decreased as mean SMC was reduced to less than 5.0%, whereas the rapidly dried seeds were distinguished by significantly high GR irrespective of the storage conditions. The ginseng seeds desiccated under different conditions showed differences in storage performance. Seeds with 7-9% MC that were dried slowly at $15^{\circ}C$ for 5-7 days showed high GR after $4^{\circ}C$ and $-18^{\circ}C$ storage; however, longer periods of desiccation decreased the germination level remarkably compared with that of rapidly dried seeds.

• Journal of Biosystems Engineering
• /
• v.17 no.2
• /
• pp.156-170
• /
• 1992

The force-deformation relationship gives the basic physical properties of the fruits such as the bioyield point, the rupture point, and the deformations at the bioyield point and the rupture point. These informations are very important to study the stress-strain relationships of the fruits. This study was conducted to analyze those physical properties according to the sampling position of the fruits, and to determine the bioyield point, the rupture point, and the deformations at the bioyield point and the rupture point of the fruits for two different storage conditions(low temperature and normal temperature) and the storage period, and to investigate the effect of loading rate on those physical properties, the hysteresis on the loading-unloading condition and the degree of elasticity of the fruits. The results of the study were as follows : 1. The physical properties(BS, US, BD, and RD) of the test specimen selected from the different sampling positions were quite different. The values of the physical properties were shown smallest ones at the cheek of the fruits, and the statistical test results of the physical properties between the cheek from the other two positions of the fruits showed that there were significant difference at the 1 % level between them. 2. The effect of loading rate on the physical properties of the fruits was relatively large, all the considered physical propertis of the fruits increased with the loading rate, but the hysteresis loss decreased with it. 3. The physical properties of the fruits according to the storage conditions and period showed different, and the bioyield deformation and the rupture deformation of the fruits increased with the storage period, but the bioyield strength and the ultimate strength of the fruits decreased with it. The effect of the storage conditions on the those physical properties showed that the normal temperature storage condition was a little higher than the low temperature storage condition. 4. As a whole, it was shown that the bioyield strength and the ultimate strength of the pear decreased a little faster than those of the apple, and the bioyield deformation and rupture deformation of the pear increased a little faster than those of apple at the two storage conditions.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.753-760
• /
• 2021

This study was carried out to discover suitable packaging methods during the cold or frozen storage of sawtooth oak and Japanese larch seedlings, which are major afforestation tree species in Korea. The weight loss rate of sawtooth oak was lower under frozen storage at -2℃ (maximum, 33.7%) than under cold storage at 2℃ (maximum, 61.0%). A film liner treatment inside the packaging box effectively suppressed the increase in the weight loss rate. For the sawtooth oak containerized seedlings, when stored at -2℃, the rate of weight loss was 17.9 to 25.4% in the untreated group and less than 1% in the film liner treatment group. Similar results were observed with Japanese larch. After two months of freezing at -2℃, both species maintained a low index of 1.0 - 1.1 with regard to the degree of shoot desiccation of containerized seedlings, and there was no significant difference between the treatments. On the other hand, the chlorine dioxide treatment could more effectively reduce the occurrence of mold and shoot desiccation than a PE single treatment in bare-root seedlings. According to these results, it was concluded that frozen storage is generally suitable as a means of long-term storage compared to cold storage of sawtooth oak and Japanese larch. A chlorine dioxide treatment at 20 ppm was effective for maintaining seedling quality levels during storage, demonstrating the good effect of suppressing the occurrence of shoot desiccation and the occurrence of mold.