• The Journal of Engineering Geology
• /
• v.28 no.1
• /
• pp.69-79
• /
• 2018

The Korean government attempts to reduce $CO_2$ emissions by 37% to 314.7 Mt $CO_2$, down from the estimated 850.6 Mt $CO_2$ until 2030 in order to confront green house effect. In this context, in 2014, Korean government launched $CO_2$ Storage Environmental Management Research (K-COSEM) Center for carrying out pilot-scale research on $CO_2$ leakage from underground $CO_2$ storage facilities. For the detection of $CO_2$ leakage, it is necessary to identify hydrologeological and geophysical characteristics of the subject area. In the study site of Naesan-ri, Daeso-myeon, Eumseong-gun, Chungbuk Province, two times injection tests (June 28-July 24, 2017 and August 07-September 11, 2017) of $CO_2$ and $SF_6$ dissolved waters, respectively, was conducted to understand the leakage behavior of $CO_2$ from underground. The injection well was drilled to a depth of 24 m with a 21-m casing and screen interval of 21~24 m depth. Two times resistivity surveys on August 18, 2017 and September 1, 2017, were conducted for revealing the flow of the injected water as well as the electrical properties of the study site. The study results have shown that the high-resistivity zone and the low-resistivity zone are clearly contrasted with each other and the flow direction of the injected water is similar to natural groundwater flow. Besides, the low resistivity zone is widely formed from the depth of injection to the shallow topsoil, indicating that the weathered zone of high permeability has high $CO_2$ leakage potential.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.334-342
• /
• 2012

It is connected with various gauges existing in Euro-Asian continents. Such differences impedes the operation seriously as on the contact of railway tracks of different gauge the cargo must be either transshipped or the running assemblies of rail vehicles must be exchanged. Those operations are costly, time-consuming and require extended infrastructure together with very expensive storage and transshipment facilities at border-crossing point. Moreover, those operations extend transportation time considerably. Therefore, effectiveness of railway transportation systems significantly depends on track gauge change 1435/1520mm, which connects with complicated handling-shifting operations. The paper concerns assessment of effectiveness in strategical rail systems with gauge changing. The paper presents short description of transport system with gauge changing and initial assessment of shifting technologies. Method of system assessment comparison based on Life Cycle Cost model is described here as well.

• Journal of the Korean housing association
• /
• v.26 no.4
• /
• pp.75-82
• /
• 2015

Although the government has revised the child welfare act, institutionalized the establishment of local children's centers, and given financial support for them, there are a number of problems with respect to their operation. Specifically, one of main problems is their limited space. Diverse problems that go with the arrangement of limited space and usability have occurred, however there are only a few strategies to use limited space flexibly. This study assumed variability as one of the methods to solve spatial problems. As a basic research for the assumption, Analyzing the variable method and characteristics of domestic and foreign child-care facility guidelines was performed trying to take advantage of as a basic data in order to seek a variable scheme of local children centers' indoor space. For this purpose, study analysed the methods and characteristics of variability centering on aspects related to variability which are environmental design elements required by local children's centers as suggested in previous studies. The results are as follows. First, the variability of space should be planned according to activity and time, and consider the methods of division, storage, and other facilities necessary. Second, methods of variability in space can be classified into creating areas and structures that are variable. Third, as a result of analysing the environmental design elements required by local children's centers, this study discovered the following characteristics: multi-purpose usability through a combination of variable devices, transition through a variable space medium and setting up areas and expansion of indoor variability assuming usability through internal and external connections.

• Journal of the Korean Society for Library and Information Science
• /
• v.54 no.4
• /
• pp.195-220
• /
• 2020

This study aims at identifying the influence factors on public library patron numbers through a time-series analysis using the Korean National Libraries Statistical Data from 2014 to 2019. The facts found can be summarized as follows; First, the variables of books collection and periodicals appeared constantly to be unsignificant in the influence on public library patron numbers through the period from 2014 to 2019. This suggests that the internet may be substituting public libraries in the service of access to ordinary books and periodicals, which has been considered as a main function of public libraries. Second, such factors as cultural or books programs, library operation, user activities, and facilities turned out to be more significant and continual in the influence on public library patron numbers than the factor of books collection and storage. This means that public libraries have a complementary relation with the internet in these fields.

• Korean Journal of Poultry Science
• /
• v.45 no.1
• /
• pp.1-15
• /
• 2018

Salmonella infections in livestock industry cause various problems such as worsening animal welfare and productivity, damaging consumer confidence in the food safety of animal products. Chicken meat and eggs are known as major source of pathogen causing human foodborne infections. Therefore food safety concerns have prompted the poultry producers and governments to introduce the strategy and regulation to control these pathogens. Salmonella can persist for long periods of time in a wide range of spaces including feed bin, feed processing facilities, poultry farm, slaughterhouse, processing plants, etc. For the effective and constant Salmonella control, combination of pre-harvest, harvest and post-harvest measures should be considered comprehensively. The control measures would be most effective at farm level where the contamination initiates. Transmission of pathogen from feed origin to the live poultry and finally to the products was proven already. To control bacteria in the feed ingredients and formula feed, thermal processing, irradiation or chemical treatment may be applied. Chemical treatments to inhibit Salmonella in the feed involve the use of products containing organic acids, formaldehyde, or a combination of such compounds. However, recontamination which might occur during storage and transport process and/or by other various factors should always be under control and eliminated. Feed additives used to control Salmonella in birds' gastrointestinal track can be of various types, including prebiotics, probiotics, organic acids and bacteriophages. Although their mode of action varies, they ultimately inhibit the colonization of Salmonella in the gut and improve the performance of birds. This review describes the strategies that could be adapted to the management of feedstuffs and the use of feed additives in pre-harvest stage to control Salmonella contamination in poultry farming.

• The Plant Pathology Journal
• /
• v.33 no.1
• /
• pp.1-8
• /
• 2017

Seed dehiscence of ginseng (Panax ginseng C. A. Mayer) is affected by moisture, temperature, storage conditions and microbes. Several microbes were isolated from completely dehisced seed coat of ginseng cultivars, Chunpoong and Younpoong at Gumsan, Korea. We investigated the potential of five Talaromyces flavus isolates from the dehiscence of ginseng seed in four traditional stratification facilities. The isolates showed antagonistic activities against fungal plant pathogens, such as Cylindrocarpon destructans, Fusarium oxysporum, Rhizoctonia solani, Sclerotinia nivalis, Botrytis cinerea, and Phytophthora capsici. The dehiscence ratios of ginseng seed increased more than 33% by treatment of T. flavus GG01, GG02, GG04, GG12, and GG23 in comparison to control (28%). Among the treatments, the reformulating treatment of T. flavus isolates GG01 and GG04 showed the highest of stratification ratio of ginseng seed. After 16 weeks, the reformulating treatment of T. flavus isolates GG01 and GG04 significantly enhanced dehiscence of ginseng seed by about 81% compared to the untreated control. The candidate's treatment of T. flavus GG01 and GG04 showed the highest decreasing rate of 93% in seed coat hardness for 112 days in dehiscence period. The results suggested that the pre-inoculation of T. flavus GG01 and GG04 found to be very effective applications in improving dehiscence and germination of ginseng seed.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.52-67
• /
• 2011

The research investigates the identification of necessary geographic information needed by forest fire suppression helicopter pilots, and the ways to acquire the required information from public institutions. Firefighting helicopter pilots demand 7 physical geographic and 13 human geographic data. Applying the geographical information acquired from Korean public institutions, the following 15 characteristics (3 physical geographic, 12 human geographic) can be found: altitude and highlands, river, high population and urban areas, roads, national park and state boundaries, fuel re-supply facilities, freshwater areas, cultural assets, (LPG)gas charging stations, gas stations, ammunition storage areas, ground power cables, and steel towers. Within the database of physical geography, there is a need for improvement on bird habitat details. Also, the availability of visibility, wind directions, and wind velocity data is limited and therefore requires refining. The location of refueling areas can be obtained by applying information received from institutions to the GIS spatial analysis.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.2
• /
• pp.95-105
• /
• 2018

An FLNG (floating liquefied natural gas) or LNG FPSO (floating production, storage and offloading) unit is a notable offshore unit with the increasing demand for LNG. The liquefaction process on an FLNG unit is the most important process because it determines the economic feasibility, but would be a hazard source because of the large quantity of hydrocarbons. While a high efficiency process such as C3MR has been preferred for onshore liquefaction processes, a relatively simple process such as the SMR (single mixed refrigerant) or DMR (dual mixed refrigerant) liquefaction process has been selected for offshore units because they require a more compact size, lighter weight, and higher safety due to their space limitation for facilities and long distance from shore. It is known that an SMR has the advantages of a simple configuration, small footprint, and lower risk. However, with an increased production rate, the inherent safety of SMR needs to be evaluated because of its small train capacity. In this study, the potential explosion risks of the SMR and DMR liquefaction processes were evaluated at the conceptual design stage. The results showed that an SMR has a lower overpressure than a DMR at the same frequency, only with a small production capacity of 0.9 MTPA. With increased capacity, the overpressure of the SMR was higher than that of the DMR. The increased number of trains increased the frequency in spite of the small amount of equipment per train. This showed that the inherent risk of an SMR is not always lower than that of a DMR, and an additional risk management strategy is recommended when an SMR is selected as the concept for an FLNG liquefaction process compared to the DMR liquefaction process.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.6
• /
• pp.56-71
• /
• 2003

Waste landfills have been the center of environmental problems and they must be restored due to environmental pollution, disgusting landscape, and cost of management. It is suggested that they be recycled urban space as cities expand. Specially, nonsanitary waste landfills which have no pollution prevention facilities cause serious problems. Restoring the landfills as parks and golf courses, so on makes more benefits because of cheap use land, closeness to urban area, flat topography applicable to parks and golf courses, and high land values after restoration and the changes to local recreation sites. Restoration of waste landfills is a complex, costly, and interdisciplinary work. But, the waste landfill is a manmade ecosystem. Control, restoration and postmanagement of waste landfills are very important problems. The role of vegetation prevents soil erosion, reduces soil water storage, and obstructs leachate seepage. Early restoration makes derelict lands into man park artificially geared to soil, vegetation, landforms and hydrology. But, Ideal restoration is to make stable ecosystem nature-friendly and compatible with surrounding landscape without more management. Landscape is structured hierarchically with patches and stands as small components and forms forest as large components. Therefore, landscape formation of the waste landfills needs much restoration process. There are many ecological restoration techniques for the waste landfills. Those are divided into artificial and natural methods. The artificial method is anthropogenic plantings while the natural method is to trigger and use succession processes. The most important thing in the restoration of waste landfills is to consider the final restoration objectives of each waste landfill. According to these objectives, the depth of covering layer, planting degree, and structural design should be determined. The effective restoration methods should be selected of artificial and natural options.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.6
• /
• pp.577-585
• /
• 2014

A series of experiments using atmospheric-pressure non-thermal plasma coupled with transition metal catalysts were performed to remove ethylene from agricultural storage facilities. The non-thermal plasma was created by dielectric barrier discharge, which was in direct contact with the catalyst pellets. The transition metals such as Ag and $V_2O_5$ were supported on ${\gamma}-Al_2O_3$. The effect of catalyst type, specific input energy (SIE) and oxygen content on the removal of ethylene was examined to understand the behavior of the hybrid plasma-catalytic reactor system. With the other parameters kept constant, the plasma-catalytic activity for the removal of ethylene was in order of $V_2O_5/{\gamma}-Al_2O_3$ > $Ag/{\gamma}-Al_2O_3$ > ${\gamma}-Al_2O_3$ from high to low. Interestingly, the rate of plasma-catalytic ozone generation was in order of $V_2O_5/{\gamma}-Al_2O_3$ > ${\gamma}-Al_2O_3$ > $Ag/{\gamma}-Al_2O_3$, implying that the catalyst activation mechanisms by plasma are different for different catalysts. The results obtained by varying the oxygen content indicated that nitrogen-derived reactive species dominated the removal of ethylene under oxygen-lean condition, while ozone and oxygen atoms were mainly involved in the removal under oxygen-rich condition. When the plasma was coupled with $V_2O_5/{\gamma}-Al_2O_3$, nearly complete removal of ethylene was achieved at oxygen contents higher than 5% by volume (inlet ethylene: 250 ppm; gas flow rate: $1.0Lmin^{-1}$; SIE: ${\sim}355JL^{-1}$).