• Journal of Korean Port Research
• /
• v.11 no.2
• /
• pp.321-337
• /
• 1997

Rapid change in the technological environment of marine transportation and the development of the ocean shipping industry have fostered a revolution in the port system. This in turn has caused major changes in the function and use of port in Korea. Aside from this. Mokpo Port, however continues to decline, because the existing port facilities and related subsystem are already obsolete with no chance of regaining operational effectiveness and treatment for proper implementation. Although a few studies have been done on the Mokpo Port, has not been found, any reseach for the analytical approach to the transportation system of it. This paper aims to make an extensive analysis of the physical distribution system in Mokpo Port focusing on the coordination of subsystems such as navigational aids system, quay handling and transfer system, storage system and inland transport system. The base of introduced simulation tool here is the queueing theory. The overall findings are as follows; 1. Among those vessels called at Mokpo Port in 1994, the average size of oceangoing vessels is 4,922.1 G/T, and the domestic is 317.8 G/T. The average arrival interval and service time of the domestic vessels are 6.0 hours and 24.1 hours respectively marking the berth occupation rate over 100%. Those for oceangoing vessels are 34.5 hours, 120.0 hours and 37.2%. In order to maintainin the berth occupation rate to 70% the capacity considering the 1994 of domestic piers must be extended to 145% and oceangoing vessels must be increased to 165% year called. 2. The capacity of approaching channel is enough to handle the total traffic volume. 3. Tugs are sufficiently being provided to handle all ships requiring their services 4. The capacity of storage and inland transportation systems are sufficient to handle the throughput and the yard stroage utilization rate of No.1 $\cdots$ No.5 is 4.5% and No.6 1S 30% of 1993's. 5. The utilization rate of LLc(Level Looping Crane) and PNT(PNeumaTic) are 2.7% and 18.8%, respectively. Practical solution and proposal for improvement of Transportation System in Mokpo Port are as follows; 1. To avoid the congestion in domestic pier introduction of a new port operation system is necessary allowing the domestic vessel to use the oceangoing pier. 2. To establish the port management information system to improve the efficiency of port operation. 3. To build a new storage system for high valued cargos including modernization of the present storage and handling system. 4. To insure the safety of navigation in approaching channel, The Vessel Traffic System including separation scheme is introduced. 5. To interest enormously on public relation to ship owner's association, shippers and consignees by showing that they can save cost and ship turnaround time in order to promote the call to Mokpo Port. At last, to be strategically change the function of Mokpo Port to the Leisure, Fishing & Ferry as well as Maritime port.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.129-137
• /
• 2016

In the present study we verified performance of feed-forward control algorithm using short term prediction of ship motion information by taking advantage of developed numerical simulation model of FPSO motion. Up until now, various studies have been conducted about thrust control and allocation for dynamic positioning systems maintaining positions of ships or marine structures in diverse sea environmental conditions. In the existing studies, however, the dynamic positioning systems consist of only feedback control gains using a motion of vessel derived from environmental loads such as current, wind and wave. This study addresses dynamic positioning systems which have feedforward control gain derived from forecasted value of a motion of vessel occurred by current, wind and wave force. In this study, the future motion of vessel is forecasted via Brown's Exponential Smoothing after calculating the vessel motion via a selected mathematical model, and the control force for maintaining the position and heading angle of a vessel is decided by the feedback controller and the feedforward controller using PID theory and forecasted vessel motion respectively. For the allocation of thrusts, the Lagrange Multiplier Method is exploited. By constructing a simulation code for a dynamic positioning system of FPSO, the performance of feedforward control system which has feedback controller and feedforward controller was assessed. According to the result of this study, in case of using feedforward control system, it shows smaller maximum thrust power than using conventional feedback control system.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.4
• /
• pp.295-301
• /
• 2013

Long-term global energy-demand growth is expected to increase driven by strong energy-demand growth from developing countries. Fusion power offers the prospect of an almost inexhaustible source of energy for future generations, even though it also presents so far insurmountable scientific and engineering challenges. One of the challenges is safe handling of hydrogen isotopes. Metal hydrides such as depleted uranium hydride or ZrCo hydride are used as a storage medium for hydrogen isotopes reversibly. The metal hydrides bind with hydrogen very strongly. In this paper, we carried out a modeling and simulation work for absorption/desorption of hydrogen by ZrCo in a horizontal annulus cylinder bed. A comprehensive mathematical description of a metal hydride hydrogen storage vessel was developed. This model was calibrated against experimental data obtained from our experimental system containing ZrCo metal hydride. The model was capable of predicting the performance of the bed for not only both the storage and delivery processes but also heat transfer operations. This model should thus be very useful for the design and development of the next generation of metal hydride hydrogen isotope storage systems.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.2
• /
• pp.151-158
• /
• 2002

The hydorgen storage alloys were produced by melting in arc melting furnace and then solution heat treated at $1,100^{\circ}C$ followed by pulverization. The chemical analysis on the samples showed that the major elements of misch metal(Mm) were La, Ce, Pr and Nd with impurity less than 1wt.%. X-ray diffraction indicated that the structure for these samples were a single phase of hexagonal with $CaCu_5$ type. Compared to the initial particle size $100{\sim}110{\mu}m$, the many fine cracks were found and particle size decreased to $14{\mu}m$ for $MmNi_{4.5}Mn_{0.5}$ after hydriding/dehydring test run. To activate the sample the vessel filled with hydrogen storage alloys was first evacuated for for at $70^{\circ}C$ and then treated for 10.5hr under hydrogen pressure of 20atm for $MmNi_{4.5}Mn_{0.5}$ alloy. The experimental data showed that the hydrogen storage alloy of $MmNi_{4.5}Mn_{0.5}$ had superior adsorption and description properties within a temperature rang of $40^{\circ}C{\sim}80^{\circ}C$ and also they had a good P-C-T curve.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.2
• /
• pp.192-198
• /
• 2006

Treatment effects of grape fruit stem extracts (GFSE) containing trans-resveratrol on the storage property of fresh jujube (Zizyphus jujube) were investigated. Fresh jujubes were packed in different storage containers [polyethylene terephthalate (PET) and polyethylene (PE)], and treated with GFSE containing trans-resveratrol of 10, 30 and 50 ppm, respectively. The storage vessels filled with $N_2$ gas, and stored in refrigerator $(0{\pm}1^{\circ}C)$ during 18 weeks, and then quality characteristics during storage period were analysed. Ethylene gas increased until 8 weeks and decreased afterward. Decaying of jujube started at $6\~8$ weeks in control, but it did at 14 week storage for the fruits at $50\%$ maturity treated with 10 ppm of GFSE and packed in PE vessel. Soluble solid (Brix degree) and total acidity of fresh jujube slightly increased in all the treatments during storage period. Hardness slightly increased until 4 weeks and decreased afterward. Vitamin C content was at the highest content of $86.8\~273.4$ mg/100g for most of treatments at 2 weeks and decreased afterward. Storage stability was higher for $50\%$ maturity fruits than for the $70\%$ maturity, and higher for PE vessels than PET containers. Storage period of fresh jujube in this experiment ranges in $10\~12$ weeks for $50\%$ maturity fruits treated with 10 ppm of GFSE and packed in PE vessel.

• Journal of Welding and Joining
• /
• v.30 no.6
• /
• pp.10-14
• /
• 2012

Recently the low alloy steel plate made with manganese-molybdenum is used widely in steam drum and separator of the new coal-fired power plant boiler. This material is suitable for the vapor storage of high pressure and high temperature. The high temperature creep strength of Mn-Mo alloy is higher than the carbon plate(SA516) that used in the subcritical pressure boiler. It reduces the thickness of the pressure vessel and makes the lightweight possible. Recently in the power plant boiler operation and production process, the damage has happened frequently in the heat affected zone and base material according to the hydrogen crack and delayed crack. This paper describes the research result about the damage case experienced in the boiler steam drum production process and present the optimum manufacture method for the similar damage prevention of recurrence.

• Food Science and Preservation
• /
• v.3 no.2
• /
• pp.121-129
• /
• 1996

Plum highlighted as a health food is needed to diversify the processed products because labor storage is big problem since the fruit was producted massively in June. The Plum was extracted by the pressing type extractor after washing, drying and removing the seed by seed separator. The crude extract was concentrated with stainless steel vessel at different temperature and stirring speed. This study was obtained as follows. The sugar content of fresh plum concentrated extract was 55.3~58.3$^{\circ}$Brix, and of the freezing plum concentrated extract was 75.5~70.3$^{\circ}$Brix. In color difference, the freezing plum concentrated extract was more deep black than fresh plum. In change patten of pH, it was decreased as concentration was proceed. The final pH was 2.3~2.2 in fresh plum, and 1.8~2.2 in freezing plum. The total acid content of fresh plum concentrated extract and the freezing plum was 45.4~47.8, 60.3~60.9%, respectively. The content of evaporation at 85$\pm$5$^{\circ}C$ was constant irrespective of stirring speed. The yield of extraction of fresh plum was higher than freezing plum. According to this results, the use of stainless vessel, 50rpm, which gave a highly qualified plum concentrated extract.

• Korean Journal of Audiology
• /
• v.25 no.1
• /
• pp.49-54
• /
• 2021

Type II mucopolysaccharidosis (MPS II) commonly known as Hunter syndrome, is a rare X-linked lysosomal storage disorder caused by iduronate-2-sulfatase deficiency, which in turn causes otorhinolaryngological manifestations, including sensorineural hearing loss (SNHL). Previously, the median survival age of patients with MPS was approximately 13.4 years. However, in the era of enzyme replacement therapy and other multidisciplinary care modalities, the life expectancy has increased. Herein, we report a rare case of an adolescent with MPS II who underwent SNHL treatment with cochlear implantation (CI). Based on unexpected findings of mastoid emissary veins and overgrowth of the vessels around the temporal bone, CI was performed using the transmeatal approach instead of the conventional transmastoid method, to avoid damage to the vessels. The average hearing threshold after CI was 35 dB and no surgical complications were encountered. Adolescent MPS II may present vessel abnormalities, which can reduce the success rate of surgery. In patients with MPS II with SNHL, CI should be performed under careful monitoring of vessel overgrowth. Moreover, with regard to feasibility of CI in adolescent patients with MPS II with SNHL, surgical techniques such as the transmeatal approach should be selected based on adequate assessment of the case.

• Journal of Audiology & Otology
• /
• v.25 no.1
• /
• pp.49-54
• /
• 2021

Type II mucopolysaccharidosis (MPS II) commonly known as Hunter syndrome, is a rare X-linked lysosomal storage disorder caused by iduronate-2-sulfatase deficiency, which in turn causes otorhinolaryngological manifestations, including sensorineural hearing loss (SNHL). Previously, the median survival age of patients with MPS was approximately 13.4 years. However, in the era of enzyme replacement therapy and other multidisciplinary care modalities, the life expectancy has increased. Herein, we report a rare case of an adolescent with MPS II who underwent SNHL treatment with cochlear implantation (CI). Based on unexpected findings of mastoid emissary veins and overgrowth of the vessels around the temporal bone, CI was performed using the transmeatal approach instead of the conventional transmastoid method, to avoid damage to the vessels. The average hearing threshold after CI was 35 dB and no surgical complications were encountered. Adolescent MPS II may present vessel abnormalities, which can reduce the success rate of surgery. In patients with MPS II with SNHL, CI should be performed under careful monitoring of vessel overgrowth. Moreover, with regard to feasibility of CI in adolescent patients with MPS II with SNHL, surgical techniques such as the transmeatal approach should be selected based on adequate assessment of the case.

• Journal of Aerospace System Engineering
• /
• v.17 no.6
• /
• pp.127-132
• /
• 2023

In this study, designing of a Type 4 pressure vessel using the filament winding method was conducted. In order to prevent leakage in consideration of the design of the hydrogen storage tank, a liner was designed by applying high-density polyethylene (HDPE), and the composite structure was designed by stacking carbon/epoxy in the hoop and helical directions. As a theoretical approach, the angle of the helical fiber and fiber thickness of each hoop and helix were designed. The safety of the design was verified using the commercial software ANSYS.