• 제목/요약/키워드: Storage Speed

검색결과 843건 처리시간 0.125초

격자 조정을 통한 PZT커패시터의 고속동작 성능 (High speed performance of Pb(Zr,Ti)O$_3$ capacitors through lattice engineering)

  • Yang, B.L.
    • 한국표면공학회지
    • /
    • 제35권3호
    • /
    • pp.127-132
    • /
    • 2002
  • High speed performance of ferroelectric Pb(Zr,Ti)$O_3$ (PZT) based capacitors is reported. La substitution up to 10% was performed to systematically lower the coercive and saturation voltages of epitaxial ferroelectric capacitors grown on Si using a ($Ti_{0.9}$ /$Al_{0.1}$ )N/Pt conducting barrier composite. Ferroelectric capacitors substituted with 10% La show significantly lower coercive voltage compared to capacitors with 0% and 3% La. This is attributed to a systematic decrease in the tetragonality (i.e., c/a ratio) of the ferroelectric phase. Furthermore, the samples doped with 10% La showed dramatically better retention and pulse width dependent polarization compared to the capacitors with 0% and 3% La. These capacitors show promise as storage elements in low power high density memory architectures.

고속철도 수직구 터널구조물에 적용된 파형강판공법의 구조적 안정성 검토 (The Evaluation of Structural Stability of Corrugated Steel Plate Method applied in High-Speed Railway Vertical Tunnel Structures)

  • 정지승;신화철;김진구
    • 한국안전학회지
    • /
    • 제31권2호
    • /
    • pp.64-69
    • /
    • 2016
  • In this paper, structural analysis of High-Speed railway vertical tunnel structures was performed to verify the structural stability. The corrugated steel plate method was applied to the vertical tunnel structures for its simple construction method and low cost. The structural stability of Wall, Connection and Storage section was performed with LRFD and ASD design method at joint part, buckling, stress and plastic hinge. From the results, all of vertical tunnel structures shown the structural stability regardless of design method and structure types. So, the application of corrugated steel plate in vertical tunnel structures instead of cast-in-placed concrete was quite enough.

CD-ROM 드라이브의 회전임계속도 및 공기유동에 의한 불안정성 연구 (Critical Speed and Flutter Instability of a Rotating Disk in CD-ROM Drives)

  • 박관우;이승엽
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 춘계학술대회논문집
    • /
    • pp.492-498
    • /
    • 2000
  • As the disk rotation speed increases in information storage devices, aerodynamically excited disk vibration is induced by airflow around the disk. This paper investigates theoretical and experimental studies on the disk flutter instability in CD-ROM drives. The effect of airflow on the disk vibration is modeled as the distributed damping and lift forces. By analyzing the eigenvalue problem of the aero-elastic coupling model, we introduces a novel technique to predict the flutter speed by comparing experimental natural frequencies with analytical ones of a disk rotating in vacuum. The new method predicts that the vibration mode with two nodal diameters in a CD disk experiences the first flutter instability at 12,000 rpm.

  • PDF

Slim-type 광학식 정보저장기기에서의 디스크 변형에 관한 실험적 연구 (An Experimental Study of Disc Warping in Slim-type Optical Disc Drive)

  • 이재성;임윤철
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 추계학술대회
    • /
    • pp.676-681
    • /
    • 2003
  • In this paper, we investigated the disc warping in high-speed slim-type optical disc drive. Recently, the information storage devices are increasing track density and higher rotation speed to enhance their recording capacity and their data transfer rate. Generally, ODD used in the Lap-top Computer has small inner space. So, the flow instability of inner space is rapidly increased as its higher rotation speed. An extreme case, the flow instability causes the malfunction of readout at pick-up of drives. The experiments and numerical analysis were carried out for several cases, the result shows the influence of airflow to the disc warping.

  • PDF

PV Water Pumping 시스템을 위한 BLDC 모터 제어 (Brushless DC Motor Control for Photovoltaic Water-Pumping System)

  • 김성남;최성호;조정민;전기영;이승환;한경희
    • 전기학회논문지P
    • /
    • 제50권3호
    • /
    • pp.109-116
    • /
    • 2001
  • In this paper, we adapted BLDC motor to PV water pumping systems to maintain high efficiency in the wide speed area. Also, to design confidence we adapted the vector control that drive the maximum torque at each speed limit. We designed optimal gain value of current, speed and pressure PI controller. Inverter gate pulse used Space Vector PWM to reduce torque pulsation of BLDC motor. According to, it was improve general matters of high water storage tank method by direct water supply pumping method.

  • PDF

고속 카메라를 이용한 전차선 형상 검측 시스템 구현 (Implementation of Image Monitoring system using High Speed Camera for Overhead Contact Wire)

  • 조용현;권삼영;이기원;박현준;나해경;고병훈;박영
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2006년도 추계학술대회 논문집
    • /
    • pp.1483-1487
    • /
    • 2006
  • In electric railway, image monitoring using high speed camera provides reliable, timely information of wear and geometry status, important in taking decisions for overhead contact wire maintenance. The contribution of this research is the development of a simple real-time monitoring system for use in measurement subsystem of contact wire and geometry of overhead contact wire in electric railway. The system has been consists of a high speed CMOS camera with resolution $1024{\times}1280$ pixels, line type laser source and PC-based image acquisition system with PCI Express slot. Vision acquisition software have been used in application programming interface for image acquisition, display, and storage with a frequency of sampling of 500 acquisitions per second.

  • PDF

5 kWh 복합재 플라이휠 로터의 회전 시험 (Spin Test of 5 kWh Composite Flywheel Rotor)

  • 한훈희;하성규;김재혁
    • 한국산학기술학회논문지
    • /
    • 제11권9호
    • /
    • pp.3135-3140
    • /
    • 2010
  • 본 논문은 에서는 5 kWh 복합재 플라이휠 로터를 설계/제작 하고, 회전 시 복합재 로터에 발생되는 변형률 분포와 로터의 파손 속도를 측정하기 위해 회전 시험을 수행하였다. 회전 시험 시 블루투스 방식의 무선 통신시스템을 이용하여 복합재 로터의 반경방향과 원주방향의 변형률을 실시간으로 측정하였다. 측정된 로터 변형률과 미리 예측된 로터 변형률을 비교하여 초기 로터 설계를 검증하였다. 복합재 로터는 파손속도인 22,000 rpm보다 11 %낮은 19,499 rpm에서 파손 되었다. 파손은 축과 복합재 로터를 연결하는 허브에서 발생하였다. 본 논문은 일반적인 관점에서 로터의 성능을 검증하였고, 고속 회전하는 복합재 로터의 예상치 않은 파손 위험을 입증하였다. 플라이휠 에너지 저장 시스템 설계 시 복합재 로터 뿐 아니라 허브 설계에도 특별한 주의가 요구된다. 플라이휠 에너지 저장 시스템을 실시간으로 관찰하기 위해서, 특히 높은 원심력을 받는 동안에도 작동 될 수 있는 무선 통신 시스템 개발이 앞으로 선행 되어야 한다.

An Efficient Implementation of Mobile Raspberry Pi Hadoop Clusters for Robust and Augmented Computing Performance

  • Srinivasan, Kathiravan;Chang, Chuan-Yu;Huang, Chao-Hsi;Chang, Min-Hao;Sharma, Anant;Ankur, Avinash
    • Journal of Information Processing Systems
    • /
    • 제14권4호
    • /
    • pp.989-1009
    • /
    • 2018
  • Rapid advances in science and technology with exponential development of smart mobile devices, workstations, supercomputers, smart gadgets and network servers has been witnessed over the past few years. The sudden increase in the Internet population and manifold growth in internet speeds has occasioned the generation of an enormous amount of data, now termed 'big data'. Given this scenario, storage of data on local servers or a personal computer is an issue, which can be resolved by utilizing cloud computing. At present, there are several cloud computing service providers available to resolve the big data issues. This paper establishes a framework that builds Hadoop clusters on the new single-board computer (SBC) Mobile Raspberry Pi. Moreover, these clusters offer facilities for storage as well as computing. Besides the fact that the regular data centers require large amounts of energy for operation, they also need cooling equipment and occupy prime real estate. However, this energy consumption scenario and the physical space constraints can be solved by employing a Mobile Raspberry Pi with Hadoop clusters that provides a cost-effective, low-power, high-speed solution along with micro-data center support for big data. Hadoop provides the required modules for the distributed processing of big data by deploying map-reduce programming approaches. In this work, the performance of SBC clusters and a single computer were compared. It can be observed from the experimental data that the SBC clusters exemplify superior performance to a single computer, by around 20%. Furthermore, the cluster processing speed for large volumes of data can be enhanced by escalating the number of SBC nodes. Data storage is accomplished by using a Hadoop Distributed File System (HDFS), which offers more flexibility and greater scalability than a single computer system.

분할된 압축 인덱스를 이용한 컬럼-지향 플래시 스토리지의 검색 성능 개선 (Search Performance Improvement of Column-oriented Flash Storages using Segmented Compression Index)

  • 변시우
    • 한국산학기술학회논문지
    • /
    • 제14권1호
    • /
    • pp.393-401
    • /
    • 2013
  • 대부분의 기존 데이터베이스들은 빠른 저장 성능을 얻기 위하여 한 레코드의 속성들을 하드 디스크에 연속적으로 배치하는 레코드-지향 저장 모델을 사용하였다. 하지만 검색이 대부분인 데이터웨어하우스 시스템에는 월등한 읽기 성능 때문에 컬럼-지향 저장 방식이 적합한 모델이 되고 있다. 또한, 현재 플래시 메모리가 고속 데이터베이스 시스템을 위한 선호 저장 매체로 인정되고 있다. 본 논문에서는 고속 컬럼-지향 데이터베이스 모델을 도입하고, 고속 컬럼-지향 데이터웨어하우스 시스템을 위한 컬럼-인지 인덱스 관리 기법을 제안한다. 본 인덱스 관리 기법은 개선된 B트리에 기반하며, 중간 노드와 리프노드에서 내장 플래시 인덱스와 빈공간 압축을 통하여 높은 검색 성능을 얻는다. 성능 평가 결과를 기반으로 본 인덱스 관리 기법이 기존 기법보다 검색 처리 및 응답 시간 측면에서 더 우수함을 확인하였다.

수열합성법으로 제조된 니켈코발트산화물(NiCo2O4) 나노시트 전극의 특성 (Characteristics of nickel cobalt oxide (NiCo2O4) nanosheet electrodes prepared by hydrothermal synthesis and heat treatment)

  • 이석희;차현진;이상운;김준아;박정환;;손영국
    • 한국표면공학회지
    • /
    • 제55권1호
    • /
    • pp.32-37
    • /
    • 2022
  • In a carbon-zero social atmospher, research is underway to reduce the use of fossil fuels. Interest in cleaner energy sources and their storage system is growing, and among them, research on effective energy storage is being actively conducted. Energy storage system(ESS) can be divided into secondary batteries, fuel cells, and capacitors, and the superiority of energy density of secondary batteries has a dominent influence on the ESS market. However, as problems with secondary batteries, charge/discharge speed, safety, and deterioration of electrodes are being highlighted. In this study, an electrode for supercapacitor with superior charge/discharge speed and specific capacitance is manufactured. The manufactured spinel nickel cobalt electrodes had specific capacitances of 1018.8 F/g, 690.8 F/g, and 475.1 F/g at 1 A/g in 1 M KOH electrolyte, and shows a performance retention rate of 77.48%, 63.30%, and 58.16% after 2000cycles at 7 A/g.